Page 1
MPgel PLUS is a re-enterable two-component silicone gel for insulated lling and sealing of casings and junction
boxes housing electrical connections of up to 1 kV or electronic components, suitable for a wide range of
applications.
Simple
The two components are supplied in separate
containers, thus ensuring the correct 1:1 mixing
ratio.
MPgel PLUS may be partially used as needed,
and reused even after the pack has been opened,
providing maximum yield.
Rapid cross-linking
MPgel PLUS has an extremely short
cross-linking time, allowing rapid
installation and reducing delays before
activation.
Fast cross-linking two-component silicone gel
Fast and accurate mixing
The measuring jug provided with the 1 and 10-liter sizes
ensures accurate mixing and prevents waste.
MPgel 100 is supplied with a new 1 liter jug, which allows
to mix the entire contents of the bottles in one go, making installation
even faster.
MPgel bags are provided with a special Perforation Pouring System (PPS)
which allows the operator to avoid contact with the gel when opening it.
The nozzle has a toothed cylindrical end that ts securely into a ring inside the bag
and punctures it, allowing the gel to ow evenly without accidental spills.
NEW
1 LITER JUG
12
min
42
LOW VOLTAGE
Page 2
Low viscosity
Its low viscosity makes MPgel PLUS
easy to pour and also ensures fast and safe
lling of the containers and gaps.
Re-enterable and removable
Once cross-linked, MPgel PLUS can easily
be removed without the need for tools
even after long periods of time.
Safe
MPgel PLUS is non-toxic, non-irritating, odourless,
and solvent-free, and is classied as non-hazardous
under European Regulation no. 1272/2008 (CLP).
High performance
High dielectric strength (25.5 kV/mm).
Wide operating temperature range
(-60 to 200 °C).
MPgel plus is resistant to UV rays and so
can also be used outdoors and exposed
to the elements.
Packaging
MPgel PLUS is available in bags
with removable bae, in bottles of dierent sizes,
and in jerrycans, for ecient use whatever the quantity
of product required.
LOW VOLTAGE
Low viscosity
Re-enterable and
removable
Available sizes
bottles in 2 sizes bags in 4 sizes jerrycans
Eco-friendly Odourless
31
Non-irritating No expiry date
High dielectric
strength
High moisture
protection
0.3 L 1 L 0.17 L 0.24 L 0.42 L 0.6 L 10 L
43
Page 3
Kit contents
▪ Bags with removable bae
▪ Perforation Pouring System (PPS)
▪ No waste thanks to PPS
▪ Suitable when a limited amount of product
is needed
Applications
▪ Filling of electrical junction boxes
▪ Insulation of 0.6/1 kV electrical connections
▪ Insulation of electronic boards and components
Advantages
▪ Non-toxic
▪ Re-enterable
▪ Eco-friendly
▪ Easy pouring
▪ Very fast cross-linking
▪ Excellent electrical insulation
▪ Good mechanical resistance
▪ UV resistant
▪ Protection from elements (rain, moisture),
dust, animals, insects, leaves
▪ No expiry date
▪ Reusable after opening
▪ Available in 7 sizes
MPgel PLUS
HF
Fast cross-linking
silicone gel
in bags
re-enterable two-component
for insulated lling and sealing
Available sizes
item volume (liters)
MPGEL 170 0.170
MPGEL 240 0.240
MPGEL 420 0.420
MPGEL 600 0.600
Filling capacity (calculated for completely empty boxes)
volume
(liters)
65×35
80×40 100×100×50 120×80×50 150×110×70 190×140×70 240×190×90
Bags
0.170 1 1 - - - - -
0.240 2 1 - - - - -
0.420 4 2 - - - - -
0.600 5 3 1 1 - - -
Bottles
0.300 3 2 - - - - -
1.0 00 9 5 2 2 1 - -
Jerrycans
10.0 86 50 20 21 9 5 2
Watch
the video
SQUAR E BOXES
A × B × H (mm)
A B
H
ROUND
BOXES
Ø × H (mm)
Ø
H
t Very fast cross-linking:
Cross-linking time: 12 min at 23 °C
t Dielectric strength: 25.5 kV/mm
t Mixing ratio 1:1
t Working time at 23 °C: 5 min
t Operating temperature: -60 to 200 °C
t Colour: pale blue
t Classied as non-hazardous according to
European Regulation no. 1272/2008 (CLP)
44
LOW VOLTAGE
Page 4
LOW VOLTAGE
MPgel PLUS
Fast cross-linking
silicone gel
in bottles
re-enterable two-component
for insulated lling and sealing
▪ No waste thanks to separate bottles
and measuring jug
▪ Can be mixed in one go with the new
1 lt jug (supplied with MP0100)
Kit contents
▪ 2 transparent 150 ml or 500 ml bottles
▪ 1 litre measuring jug (MP0100)
Available sizes
item volume (liters)
MPGEL 30 0.3
MPGEL 100 1
HF
Watch
the video
MPgel PLUS
Fast cross-linking
silicone gel
in jerrycans
re-enterable two-component
for insulated lling and sealing
▪ No waste thanks to separate jerrycans
and measuring jug
▪ Suitable when a large amount of product
is needed and/or for later use
Kit contents
▪ 2 transparent 5 litres jerrycans
▪ Measuring jug
Available sizes
item volume (liters)
MPGEL 1000 10.0
HF
45
Loading...