Datasheet M8PSDSOFT, M8EK900-KI, M8DKPRO, M8DKFL-101 Datasheet (SGS Thomson Microelectronics)

1/4June 2000

M8EK900

M8DKPRO, M8DKFL

M8 FLASH+PSD System Development Tools

■ Hardware Tools:

– FLASH+PSD Evaluation Board Kit basedon

popular MCUs

– FLASH+PSD FlashLINK JTAG In-System

Programming (ISP) Kit

– FLASH+PSD PSDpro insertion parallel

device programmer kit

■ Software Tools:

– Integrated suite of industry standard design

tools ported to a Windows environment

– M8 PSDsoft for the M88family, supplied on a

CD-ROM, sold as part of a kit, with free
upgrades available on the web site, after
product registration

– PSDsoft

Express

for the M89 family, may be
downloaded from the ST web site
(

www.st.com/flashpsd

) at no charge, after

registration.

DESCRIPTION

STMicroelectronics offers a set of user friendly
PC-based hardwareand software tools for design,
development and programming of FLASH+PSD
based MCU systems.

These tools can be used with any PC using
Microsoft Windows 95, Windows 98 or Windows
NT.

HARDWARE TOOLS

The hardware tools are summarized in Table 1
and may be ordered individually or in kits.

Figure 1. M8EK900-KI Kit

Figure 2. M8DKFL-101 Kit

Figure 3. M8DKPRO Kit

Table 1. Product Summary

1

Note: 1. Please see Table 2 for complete information.

2. Another Evaluation kit, based on the ST9R158 MCU, is

currently under development.

M8EK900-KI

2

FLASH+PSD/80C32 MCU
Evaluation and JTAGISP Kit

for M88 or M89 families
M8DKFL-101 FlashLINK JTAGISP Kit
M8DKPRO PSDpro Parallel Programmer Kit

M8PSDSOFT

M8PSDsoft CD-ROM

(part of a kit)

M8EK900, M8DKPRO, M8DKFL

2/4

Table 2. Ordering Information Scheme

Part Number Item Name

Mains
Power

FLASH+PSD

Package

Description

M8EK900-KI110

FLASH+PSD/80C32
Evaluation and JTAGISP
Kit

110 V PLCC52

8-bit FLASH+PSD/80C32 MCU
Evaluation Board for the M88 and M89
families, FlashLINK JTAG Programmer,
JTAGLoop-back cable, UART cable,
Power supply, PSDsoft development
software for the M88 family, MCU and
FLASH+PSD sample

M8EK900-KI220 220 V PLCC52

M8DKPRO-K52-110

PSDpro Insertion
Programmer Kit

110 V PLCC52 PSDpro ParallelProgrammer,FlashLINK

JTAGserial programmer, JTAGLoop­back cable, Parallel Cable, Power
Supply, M8 Family Adapter, Device
Package Adapter, PSDsoft development
software for the M88 family

M8DKPRO-T52-110 110 V PQFP52
M8DKPRO-K52-220 220 V PLCC52

M8DKPRO-T52-220 220 V PQFP52

M8DKFL-101 FlashLINK JTAGISP Kit — —

JTAGISP Programmer with PSDsoft
development software

SOFTWARE TOOLS
M8 PSDsoft

M8 PSDsoft (for the M88 family) is user-friendly
evaluation, development and programming
software. It uses a point-and-click graphical user
interface that leads the designer, in a logical step­by-step procedure, to configure, design, compile
and program the FLASH+PSD. The software has
a built-in on-line help feature, and all relevant
manuals are included on the CD.

This software takes the user sequentially through
the following key steps:

■ Logic design entry (CPLD)

■ FLASH+PSD Device configuration

■ Logic synthesis and fitting

■ MCU code mapping

■ FLASH+PSD Programming Code, for:

– FlashLINK JTAG ISP, or
– PSDpro insertion programmer

PSDsoft

Express

PSDsoft

Express

(for the “easy-to-design-in” M89

family) is user-friendly, point-and-click,

menu-

driven,

evaluation,developmentand programming
software. It can be downloaded, at nocharge, from
the ST web site, after registration. Included in the
software is a wizard that guides the designer. The
system designer does not need to have
exhaustive knowledge of PLDs or a PLD design
language (such as ABEL). The software steps the
designer through seven key steps from
configuration of the FLASH+PSD to programming
the code and firmware.

ORDERING INFORMATION SCHEME

The notation used for the device number is as
shown in Table 2.For a list of available options, or
forfurther information on any aspectof this device,
please consult our pages on the world wide web:

www.st.com/flashpsd

or contact your nearest ST Sales Office.

3/4

M8EK900, M8DKPRO, M8DKFL

Table 3. Revision History

Date Description of Revision

01-Nov-1999 Document written

21-Jun-2000

M8EK900-KI illustration replaced by the new version
Addition of references to,and descriptions of, PSDsoft

Express

M8EK900, M8DKPRO, M8DKFL

4/4

Information furnished is believed to be accurate and reliable. However, STMicroelectronics assumes no responsibility for the consequences
of useof such information nor forany infringement ofpatents or other rights ofthird parties which may result from itsuse. No license isgranted
by implication or otherwise under any patent or patent rights of STMicroelectronics. Specifications mentioned in this publication are subject
to change without notice. This publication supersedes and replaces all information previously supplied. STMicroelectronics products are not
authorized for use as criticalcomponents in life support devices or systems without express writtenapproval of STMicroelectronics.

 2000 STMicroelectronics - All Rights Reserved

The ST logo is a registered trademark of STMicroelectronics.

All other names are the property of their respective owners.

STMicroelectronics GROUP OF COMPANIES

Australia - Brazil - China - Finland - France - Germany - Hong Kong - India - Italy - Japan - Malaysia - Malta - Morocco - Singapore - Spain -

Sweden - Switzerland - United Kingdom - U.S.A.

http://www.st.com