Datasheet M240J1-L01 Product Information (CHIMEI)

Doc. No.: 2405X067

Issued Date: Aug.16, 2006

Model No.: M240J1-L01

Approval

TFT LCD Approval Specification

MODEL NO.: M240J1- L01

Customer:

Approved by:

Note:

www.jxlcd.com

記錄工作審核角色投票

2006-08-22 19:15:47 CST

2006-08-21 09:39:28 CST

Approve by Dept. Mgr.(QA RA)

Approve by Director

tony_wang(王振昌 /43171/54985)

teren_lin(林添仁 /56910/36064)

Assignee Accept

Director Accept

1 / 26

Version 2.2

Doc. No.: 2405X067

Issued Date: Aug.16, 2006

Model No.: M240J1-L01

Approval

- CONTENTS -

REVISION HISTORY...............................................................................................................................3

1. GENERAL DESCRIPTION ..................................................................................................................4

1.1 OVERVIEW

1.2 FEATURES

1.3 APPLICATION

1.4 GENERAL SPECIFICATIONS

1.5 MECHANICAL SPECIFICATIONS

2. ABSOLUTE MAXIMUM RATINGS.......................................................................................................5

2.1 ABSOLUTE RATINGS OF ENVIRONMENT

2.2 ELECTRICAL ABSOLUTE RATINGS

2.2.1 TFT LCD MODULE

2.2.2 BACKLIGHT UNIT

3. ELECTRICAL CHARACTERISTICS....................................................................................................7

3.1 TFT LCD MODULE

3.2 BACKLIGHT UNIT

4. BLOCK DIAGRAM...............................................................................................................................11

4.1 TFT LCD MODULE

4.2 BACKLIGHT UNIT

5. INPUT TERMINAL PIN ASSIGNMENT................................................................................................12

5.1 TFT LCD MODULE

5.2 BACKLIGHT UNIT

5.3 COLOR DATA INPUT ASSIGNMENT

6. INTERFACE TIMING ...........................................................................................................................15

6.1 INPUT SIGNAL TIMING SPECIFICATIONS

6.2 POWER ON/OFF SEQUENCE

7. OPTICAL CHARACTERISTICS...........................................................................................................17

7.1 TEST CONDITIONS

7.2 OPTICAL SPECIFICATIONS

8. PACKAGING........................................................................................................................................21

8.1 PACKING SPECIFICATIONS

8.2 PACKING METHOD

9. DEFINITION OF LABELS....................................................................................................................23

10. PRECAUTIONS.................................................................................................................................24

10.1 ASSEMBLY AND HANDLING PRECAUTIONS

10.2 SAFETY PRECAUTIONS

11. MECHANICAL CHARACTERISTICS.................................................................................................25

www.jxlcd.com

2 / 26

Version 2.2

Doc. No.: 2405X067

Issued Date: Aug.16, 2006

Model No.: M240J1-L01

Approval

REVISION HISTORY

Version Date Section Description

Ver. 2.0 Ver. 2.1

Ver. 2.2

May 15, 06’

Jun. 5, 06’

Aug. 16, 06’

-

1.1

1.2 11

M240J1 -L02 Approval specifications was first issued. To modify the description in the 1.1 OVERVIEW section. To delete the 10 To update the module outline drawing.

th

line description in the 1.2 FEATURES section.

www.jxlcd.com

3 / 26

Version 2.2

Doc. No.: 2405X067

Issued Date: Aug.16, 2006

Model No.: M240J1-L01

Approval

1. GENERAL DESCRIPTION

1.1 OVERVIEW

M240J1-L01 is an 24.0” TFT Liquid Crystal Display module with 6 CCFL Backlight unit and 30 pins 2ch-LVDS interface. This module supports 1920 x 1200 WUXGA mode and can display up to 16.7M colors. The inverter module for Backlight is not built in.

1.2 FEATURES

- Super MVA extra-wide viewing angle.

- High contrast ratio.

- Fast response time.

- High color saturation.

- WUXGA (19 20 x 1200 pixels) resolution.

- DE (Data Enable) only mode.

- LVDS (Low Voltage Differential Signaling) interface.

- RoHS compliance.

- TCO’03 compliance.

1.3 APPLICA TION

- TFT LCD Monitor

www.jxlcd.com

1.4 GENERAL SPECIFICATI0NS

Bezel Opening Area 522.4 (H) x 328.0 (V) mm

Pixel Arrange ment RGB vertical stripe - -

Transmissive Mode Normally black - -

Surface Treatment AG type: 3H hard coating, Haze 25 - -

www.jxlcd.com

Item Specification Unit Note

Active Area 518.4 (H) x 324 (V) (24.0” diagonal) mm

Driver Element a-si TFT active matrix - -

Pixel Number 1920 x R.G.B. x 1200 pixel -

Pixel Pitch 0.270 (H) x 0.270 (V) mm -

Display Colors 16.7M color -

(1)

1.5 MECHANICAL SPECIFICATIONS

Item Min. Typ. Max. Unit Note

Horizontal(H) 545.9 546.4 546.9 mm

Module Size

Note (1) Please refer to the attached drawings for more information of front and back outline dimensions.

Vertical(V) 351.5 352.0 352.5 mm

Depth(D) 35.36 35.86 mm

Weight - - 2800 g -

4 / 26

(1)

Version 2.2

Doc. No.: 2405X067

A

Issued Date: Aug.16, 2006

Model No.: M240J1-L01

Approval

2. ABSOLUTE MAXIMUM RATINGS

2.1 ABSOLUTE RATINGS OF ENVIRONMENT

Item Symbol

Storage Temperature TST -20 60 ºC (1)

Operating Ambient T emperature TOP 0 50 ºC (1), (2)

Shock (Non-Operating) S

Vibration (Non-Operating) V

Note (1) Temperature and relative humidity range is shown in the figure below. (a) 90 %RH Max. (Ta ≦ 40 ºC). (b) Wet-bulb temperature should be 39 ºC Max. (Ta > 40 ºC). (c) No condensation. Note (2) The temperature of panel display surface area should be 0 ºC Min. and 60 ºC Max.

Relative Humidity (%RH)

- 50 G (3), (5)

NOP

- 1.5 G (4), (5)

NOP

Min. Max.

Value

Unit Note

100

90 80

60

40

www.jxlcd.com

20 10

Note (3) 11ms, half sine wave, 1 time for ± X, ± Y, ± Z. Note (4) 10 ~ 300 Hz, 10min/cycle, 3 cycles each X, Y, Z. Note (5) At testing Vibration and Shock, the fixture in holding the module has to be hard and rigid enough

Operating Range

Storage Range

80 60 -20 400 20-40

Temperature (ºC)

so that the module would not be twisted or bent by the fixture.

The fixing condition is shown as below:

t Room Temperature

Side Mount Fixing Screw

Gap=2mm

Bracket

5 / 26

LCD Module

Side Mount Fixing Screw

Stage

Version 2.2

Doc. No.: 2405X067

Issued Date: Aug.16, 2006

Model No.: M240J1-L01

Approval

2.2 ELECTRICAL ABSOLUTE RATINGS

2.2.1 TFT LCD MODULE

Item Symbol

Power Supply Voltage Vcc -0.3 +6.0 V

Logic Input Voltage VIN -0.3 4.3 V

2.2.2 BACKLIGHT UNIT

Item Symbol

Lamp Voltage VL - 4.5K V Lamp Current IL 4.0 7.0 mA

Lamp Frequency FL 40 80 KHz

Note (1) Permanent damage to the device may occur if maximum values are exceeded. Function operation

should be restricted to the conditions described under Normal Operating Co nditions.

Min. Max.

Value

Unit Note

(1)

Unit Note

(1), (2)

RMS

(1), (2)

Note (2) Specified values are for lamp (Refer to 3.2 for further information).

www.jxlcd.com

6 / 26

Version 2.2

Doc. No.: 2405X067

Issued Date: Aug.16, 2006

Model No.: M240J1-L01

Approval

3. ELECTRICAL CHARACTERISTICS

3.1 TFT LCD MODULE Ta = 25 ± 2 ºC

Parameter Symbol

Min. Typ. Max.

Power Supply V oltage Vcc 4.5 5.0 5.5 V -

Ripple Voltage VRP - - 100 mV -

Rush Current I

Power Supply Current

RUSH

White 1.8 2.2 A (3)a

Black 1.3 1.7 A (3)b

Vertical Stripe

-

- 2 4 A (2)

1.7 2.1 A (3)c

LVDS differential input voltage Vid 100 - 600 mV

LVDS common input voltage Vic - 1.2 - V

Logic “L” input voltage Vil Vss - 0.8 V

Note (1) The module should be always operated within above ranges. Note (2) Measurement Conditions:

Value

Unit Note

+5.0V

R1

47K

Q1 2SK1475

FUSE

C3 1uF

Vcc

(LCD Module Input)

(High to Low)

(Control Signal)

SW

www.jxlcd.com

+12V

www.jxlcd.com

C1

1uF

VR1

R2

1K

47K

0.01uF

Q2

2SK1470

C2

Vcc rising time is 470µs

+5.0V

0.9Vcc

0.1Vcc

GND

470µs

7 / 26

Version 2.2

Doc. No.: 2405X067

Issued Date: Aug.16, 2006

Model No.: M240J1-L01

Approval

Note (3) The specified power supply current is under the conditions at Vcc = 5.0 V, Ta = 25 ± 2 ºC, fv = 60

Hz, whereas a power dissipation check pattern below is displayed. a. White Pattern

Active Area

c. Vertical Stripe Pattern

b. Black Pattern

Active Area

R

G

R

B

G

R

B

G

R R

G

B B

R R

R

G G

B B

R

www.jxlcd.com

Active Area

8 / 26

Version 2.2

Doc. No.: 2405X067

Issued Date: Aug.16, 2006

Model No.: M240J1-L01

Approval

3.2 BACKLIGHT UNIT Ta = 25 ± 2 ºC

Parameter Symbol

Lamp Input Voltage VL 1683 1870 2057 V

Lamp Current IL 4.0 6.0 7.0 mA

Lamp Turn On Voltage VS

Operating Frequency FL 40 --- 80 KHz (3)

Lamp Life Time LBL 50,000 --- --- Hrs (5), IL = 6.0 mA

Power Consumption PL --- 67.32 --- W (4), IL = 6.0 mA

Note (1) Lamp current is measured by current amplify & oscilloscope as shown below:

Min. Typ. Max.

--- --- 3670 (25

--- --- 4280 (0

Value

o

C) V

o

C) V

Unit Note

I

RMS

(2)

RMS

(2)

RMS

= 6.0 mA

L

(1)

Note (2) The voltage that must be larger than Vs should be applied to the lamp for more than 1 second

Note (3) The lamp frequency may produce interference with horizontal synchronization frequency from the

LCD

Module

www.jxlcd.com

after startup. Otherwise, the lamp may not be turned on normally.

display, which might cause line flow on the display. In order to avoid interference, the lamp frequency should be detached from the horizontal synchronization frequency and its harmonics as

+

．．．．

-

+

Current

Probe

Measure equipment: Current Amplify: Tektronix TCPA300 Current probe: Tektronix TCP312 Oscilloscope: TDS3054B

．．．．

Inverter

Current Amplify

Oscilloscope

far as possible. Note (4) P Note (5) The lifetime of lamp can be defined as the time in which it continues to operate under the condition

(b) When the effective ignition length becomes or lower than 80% of its original value. (Effective

Note (6) The waveform of the voltage output of inverter must be area-symmetric and the design of the

= IL × VL × 6

L

Ta = 25 ±2

(a) When the brightness becomes or lower than 50% of its original value.

ignition length is defined as an area that has less than 70% brightness compared to the

brightness in the center point.)

inverter must have specifications for the modularized lamp. The performance of the Backlight,

such as lifetime or brightness, is greatly influenced by the characteristics of the DC-AC inverter for

the lamp. All the parameters of an inverter should be carefully designed to avoid producing too

o

C and IL = 6.0 mArms until one of the following events occurs:

9 / 26

Version 2.2

Doc. No.: 2405X067

Issued Date: Aug.16, 2006

Model No.: M240J1-L01

Approval

much current leakage from high voltage output of the inverter. When designing or ordering the

inverter please make sure that a poor lighting caused by the mismatch of the Backlight and the

inverter (miss-lighting, flicker, etc.) never occurs. If the above situation is confirmed, the module

should be operated in the same manners when it is installed in your instrume nt.

The output of the inverter must have symmetrical (negative and positive) voltage waveform and symmetrical current waveform.(Unsymmetrical ratio is less than 10%) Please do not use the inverter which has unsymmetrical voltage and unsymmetrical current and spike wave. Lamp frequency may produce interface with horizontal synchronous frequency and as a result this may cause beat on the display. Therefore lamp frequency shall be as away possible from the horizontal synchronous frequency and from its harmonics in order to prevent interference.

Requirements for a system inverter design, which is intended to have a better display performance, a better power efficiency and a more reliable lamp. It shall help increase the lamp lifetime and reduce its leakage current. a. The asymmetry rate of the inverter waveform should be 10% below; b. The distortion rate of the waveform should be within √2 ± 10%;

c. The ideal sine wave form shall be symmetric in positive and negative polarities

* Asymmetry rate:

www.jxlcd.com

I p

I -p

| I

* Distortion rate I

– I –p | / I

p

(or I –p) / I

p

rms

* 100%

10 / 26

Version 2.2

Doc. No.: 2405X067

)

(

)

Issued Date: Aug.16, 2006

Model No.: M240J1-L01

Approval

4. BLOCK DIAGRAM

4.1 TFT LCD MODULE

RXO0(+/-) RXO1(+/-) RXO2(+/-) RXO3(+/-) RXOC(+/-) RXE0(+/-) RXE1(+/-) RXE2(+/-) RXE3(+/-) RXEC(+/-) NC

Vcc

GND

VL

(Starconn 093G53 -B0001A

or JAE FI-X30SSL-HF)

INPUT CONNECTOR

LAMP CONNECTOR

(YEONHO 20015HS-04LB)

TIMING CONTROLLER

DC/DC CONVERTER &

REFERENCE VOLTAGE

LVDS INPUT /

SCAN DRIVER IC

TFT LCD PANEL

(1920x3x1200)

DA TA DRIVER IC

BACKLIGHT UNIT

4.2 BACKLIGHT UNIT

www.jxlcd.com

HV (+

HV (-

. . . .

HV (+ HV

-

11 / 26

Version 2.2

Doc. No.: 2405X067

Issued Date: Aug.16, 2006

Model No.: M240J1-L01

Approval

5. INPUT TERMINAL PIN ASSIGNMENT

5.1 TFT LCD MODULE

Pin Name Description

1 RXO0- Negative LVDS differential data input. Channel O0 (odd) 2 RXO0+ Positive LVDS differential data input. Channel O0 (odd) 3 RXO1- Negative LVDS differential data input. Channel O1 (odd) 4 RXO1+ Positive LVDS differential data input. Channel O1 (odd) 5 RXO2- Negative LVDS differential data input. Channel O2 (odd) 6 RXO2+ Positive LVDS differential data input. Channel O2 (odd) 7 GND Ground 8 RXOC- Negative LVDS differential clock input. (odd) 9 RXOC+ Positive LVDS differential clock input. (odd)

10 RXO3- Negative LVDS differential data input. Channel O3(odd)

11 RXO3+ Positive LVDS differential data input. Channel O3 (odd) 12 RXE0- Negative LVDS differential data input. Channel E0 (even) 13 RXE0+ Positive LVDS differential data input. Channel E0 (even) 14 GND Ground 15 RXE1- Negative LVDS differential data input. Channel E1 (even) 16 RXE1+ Positive LVDS differential data input. Channel E1 (even) 17 GND Ground 18 RXE2- Negative LVDS differential data input. Channel E2 (even) 19 RXE2+ Positive LVDS differential data input. Channel E2 (even) 20 RXEC- Negative LVDS differential clock input. (even) 21 RXEC+ Positive LVDS differential clock input. (even) 22 RXE3- Negative LVDS differential data input. Channel E3 (even) 23 RXE3+ Positive LVDS differential data input. Channel E3 (even) 24 GND Ground 25 NC No connection 26 NC No connection. 27 VCC +5.0V power supply 28 VCC +5.0V power supply 29 VCC +5.0V power supply 30 VCC +5.0V power supply

Note (1) Connector Part No.: Starconn 093G53-B0001A or JAE FI-X30SSL-HF.

www.jxlcd.com

Note (2) The first pixel is odd. Note (3) Input signal of even and odd clock should be the same timing.

12 / 26

Version 2.2

Doc. No.: 2405X067

Issued Date: Aug.16, 2006

Model No.: M240J1-L01

Approval

SELLVDS = Low or Open L VDS Channel E0

L VDS Channel E1

L VDS Channel E2

L VDS Channel E3

L VDS Channel O0

L VDS Channel O1

L VDS Channel O2

L VDS Channel O3

LVDS output D7 D6 D4 D3 D2 D1 D0 Data order EG0 ER5 ER4 ER3 ER2 ER1 ER0 LVDS output D18 D15 D14 D13 D12 D9 D8 Data order EB1 EB0 EG5 EG4 EG3 EG2 EG1 LVDS output D26 D25 D24 D22 D21 D20 D19 Data order DE NA NA EB5 EB4 EB3 EB2 LVDS output D23 D17 D16 D11 D10 D5 D27 Data order NA EB7 EB6 EG7 EG6 ER7 ER6 LVDS output D7 D6 D4 D3 D2 D1 D0 Data order OG0 OR5 OR4 OR3 OR2 OR1 OR0 LVDS output D18 D15 D14 D13 D12 D9 D8 Data order OB1 OB0 OG5 OG4 OG3 OG2 OG1 LVDS output D26 D25 D24 D22 D21 D20 D19 Data order DE NA NA OB5 OB4 OB3 OB2 LVDS output D23 D17 D16 D11 D10 D5 D27 Data order NA OB7 OB6 OG7 OG6 OR7 OR6

5.2 BACKLIGHT UNIT:

Pin Symbol Description Remark 1-1 HV High Voltage Pink 1-2 HV High Voltage White 2-3 HV High Voltage Pink 2-4 HV High Voltage White 3-5 HV High Voltage Pink 3-6 HV High Voltage White 4-7 HV High Voltage Pink

www.jxlcd.com

4-8 HV High Voltage White

5-9 HV High Voltage Pink 5-10 HV High Voltage White 6-11 HV High Voltage Pink 6-12 HV High Voltage White

Note (1) Connector Part No.: 20015HS-04LB (YEONHO) or equivalent

13 / 26

Version 2.2

Doc. No.: 2405X067

Issued Date: Aug.16, 2006

Model No.: M240J1-L01

Approval

5.3 COLOR DATA INPUT ASSIGNMENT

The brightness of each primary color (red, green and blue) is based on the 8-bit gray scale data input for the color. The higher the binary input, the brighter the color. The table below provides the assignment of color versus data input.

Data Signal

Basic

Colors

Gray

Scale

Of

Red

Color

Black

Red

Green

Blue

Cyan

Magenta

Yellow

White

Red(0) / Dark

Red(1) Red(2)

Red(253) Red(254) Red(255)

R7 R6 R5 R4 R3 R2 R1 R0 R7 R6 G5 G4 G3 G2 G1 G0 R7 R6 B5 B4 B3 B2 B1 B0

0

1

0

1

0

:

1

Red Green Blue

0

1

0

1

0

1

0

1

0

1

0

1

0

1

0

1

0

:

1

0

1

0

1

0

1

0

Green(0) / Dark

Gray

Scale

Of

Green

Gray

Scale

Of

Blue

Note (1) 0: Low Level Volt age, 1: High Level Voltage

Green(1) Green(2)

www.jxlcd.com

Green(253)

www.jxlcd.com

Green(254)

Green(255)

Blue(0) / Dark

Blue(1) Blue(2)

Blue(253) Blue(254) Blue(255)

0

:

0

:

0

1

0

1

0

:

0

1

0

1

0

1

0

1

0

1

0

1

0

:

0

1

0

1

0

1

0

1

14 / 26

Version 2.2

Doc. No.: 2405X067

Issued Date: Aug.16, 2006

Model No.: M240J1-L01

Approval

6. INTERFACE TIMING

6.1 INPUT SIGNAL TIMING SPECIFICATIONS

The input signal timing specifications are shown as the following table and timing diagram.

Signal Item Symbol Min. Typ. Max. Unit Note

Frequency Fc 50.0 77 83.0 MHz -

LVDS Clock

LVDS Data

Vertical Active Display Term

Horizontal Active Display Term

Note: Because this module is operated by DE only mode, Hsync and Vsync input signals should be set

Period Tc - 13.0 - ns High Time T ch - 4/7 - Tc Low Time Tcl - 3/7 - Tc Setup Time Tlvs 600 - - ps Hold Time Tlvh 600 - - ps Frame Rate Fr 40 60 63 Hz Tv=Tvd+Tvb Total Tv 1209 1235 1245 Th Display Tvd 1200 1200 1200 Th Blank Tvb 9 35 Tv-Tvd Th Total Th 1030 1040 1075 Tc Th=Thd+Thb Display Thd 960 960 960 Tc Blank Thb 70 80 Th-Thd Tc -

to low logic level or ground. Otherwise, this module would operate abnormally.

INPUT SIGNAL TIMING DIAGRAM

www.jxlcd.com

DE

Th

DCLK

C

T

DE

DATA

Thb

T

hd

15 / 26

Version 2.2

Doc. No.: 2405X067

Issued Date: Aug.16, 2006

Model No.: M240J1-L01

Approval

6.2 POWER ON/OFF SEQUENCE To prevent a latch-up or DC operation of LCD module, the power on/off sequence should be as the diagram below.

Restart

Power On

Power Off

Power Supply

for LCD, Vcc

- Interface Signal (LVDS Signal of Transmitter), V

- Power for Lamp

Timing Specifications:

0.5< t1 ≦ 10 msec 0 < t2 ≦ 50 msec 0 < t3 ≦ 50 msec

90%

0V

I

www.jxlcd.com

t4 ≧ 500 msec t5 ≧ 500 msec

10%

t1

Valid Data

ONOFF OFF

90%

10%

t4

t3 t2

t6 t5

50%50%

t6 ≧ 90 msec

16 / 26

Version 2.2

Doc. No.: 2405X067

Issued Date: Aug.16, 2006

Model No.: M240J1-L01

Approval

7. OPTICAL CHARACTERISTICS

7.1 TEST CONDITIONS

Item Symbol Value Unit

Ambient Temperature Ta

Ambient Humidity Ha

Supply Volt age VCC 5.0 V

Input Signal According to typical value in "3. ELECTRICAL CHARACTERISTICS"

Lamp Current IL 6.0 mA

Inverter Operating Frequency FL 50 KHz

Inverter DARFON VK88070F02

25±2

50±10

7.2 OPTICAL SPECIFICATIONS

The relative measurement methods of optical characteristics are shown in 7.2. The following items should

be measured under the test conditions described in 7.1 and stable environment shown in Note (5).

o

C

%RH

Item Symbol Condition Min. Typ. Max. Unit Note

Red

Color

Chromaticity

(CIE 1931)

www.jxlcd.com

Center Luminance of White

(Center of Screen)

Viewing Angle

www.jxlcd.com

Contrast Ratio CR

Response Time

White Variation

Green

Blue

White

Horizontal

Vertical

Rx Ry Gx Gy

Bx

By Wx Wy

L

C

TR - 13 18

TF - 7 12

T

GtG_AVE_

δW

θ

+

x

θ

-

x

θ

+

Y

-

θ

Y

θ

=0°, θY =0°

x

CS-1000T

=0°, θY =0°

θ

x

θ

=0°, θY =0°

x

CA-210

CR ≧ 10

CA-210

Typ -

0.03

240 300 - cd/m2(4), (5) 700 1000 - - (2), (5)

80 88 80 88 80 88 80 88 -

0.640

0.348

0.293

0.585

0.143

0.075

0.313

0.329

- 8 13

- 1.25 1.40 - (5), (6)

Typ +

0.03

- (1), (5)

ms (3), (7)

Deg. (1), (5)

17 / 26

Version 2.2

Doc. No.: 2405X067

θ

y

θx−

θx+

θ

y

Issued Date: Aug.16, 2006

Model No.: M240J1-L01

Approval

Note (1) Definition of Viewing Angle (θx, θy):

Normal

x =

= 0º

θy- θy+

θX- = 90º

6 o’clock

θ

- = 90º

Note (2) Definition of Contrast Ratio (CR):

The contrast ratio can be calculated by the following expression.

Contrast Ratio (CR) = L255 / L0 L255: Luminance of gray level 255 L 0: Luminance of gray level 0

CR = CR (1)

www.jxlcd.com

CR (X) is corresponding to the Contrast Ratio of the point X at Figure in Note (6).

x-

y-

12 o’clock direction

y+

+ = 90º

x+

θX+ = 90º

Note (3) Definition of Response Time (T

100%

90%

Optical

Response

10%

0%

Gray Level 255

, TF):

R

Gray Level 255

Gray Level 0

T

F

66.67ms 66.67ms

T

R

18 / 26

Version 2.2

Doc. No.: 2405X067

Issued Date: Aug.16, 2006

Model No.: M240J1-L01

Approval

Note (4) Definition of Luminance of White (LC):

Measure the luminance of gray level 255 at center point LC = L (1) L (x) is corresponding to the luminance of the point X at Figure in Note (6).

Note (5) Measurement Setup:

The LCD module should be stabilized at given temperature for 20 minutes to avoid abrupt temperature change during measuring. In order to stabilize the luminance, the measurement should be executed after lighting Backlight for 20 minutes in a windless room.

LCD Module

LCD Panel

Center of the Screen

CA-210 CA-1000T

Field of View = 2º

www.jxlcd.com

Light Shield Room (Ambient Luminance < 2 lux)

19 / 26

Version 2.2

Doc. No.: 2405X067

X

A

Issued Date: Aug.16, 2006

Model No.: M240J1-L01

Approval

Note (6) Definition of White Variation (δW):

Measure the luminance of gray level 255 at 13 points

δW =

Maximum [L(1), L(2), L(3), L(4), L(5), L(6), L(7), L(8), L(9), L(10), L(11), L(12), L(13)] Minimum [L(1), L(2), L(3), L(4), L(5), L(6), L(7), L(8), L(9), L(10), L(11), L(12), L(13)]

Horizontal Line Number

1/10H

6

H/4

H/4H/4

H

Vertical Line Number

H/4

www.jxlcd.com

1/10H

Note (7) Definition of Response Time (T

T

The Gray to Gray response time is defined as the following chart.

GTG_AVE

is defined as the total average response time for “Gray To Gray “.

9

11

2

4

1/10W

W/4 W/4

GTG_AVE

ctive Area

):

12

W

7

3

1

5

W/4

10

13

8

：Test Point X＝1 to 13

1/10W

Gray to Gray

G0 G32 G64 G96 G128 G160 G192 G224 G255

G0 G32 G64 G96

Initial Gray

G128 G160 G192 G224 G255

20 / 26

Target Gray

Version 2.2

Doc. No.: 2405X067

Issued Date: Aug.16, 2006

Model No.: M240J1-L01

Approval

8. PACKAGING

8.1 PACKING SPECIFICATIONS

(1) 5 LCD modules / 1 Box (2) Box dimensions: 645(L) X 377(W) X 470(H) mm (3) Weight: approximately 16.5Kg (5 modules per box)

8.2 PACKING METHOD

(1) Carton Packing should have no failure in the following reliability test items.

Test Item Test Conditions Note

ISTA STANDARD Random, Frequency Range: 1 – 200 Hz

Vibration

Dropping Test 1 Angle, 3 Edge, 6 Face, 60cm Non Operation

Top & Bottom: 30 minutes (+Z), 10 min (-Z), Right & Left: 10 minutes (X) Back & Forth 10 minutes (Y)

Non Operation

www.jxlcd.com

Figure. 8-1 Packing method

21 / 26

Version 2.2

Doc. No.: 2405X067

Issued Date: Aug.16, 2006

Model No.: M240J1-L01

Approval

For ocean shipping

For air transport

Figure. 8-2 Packing method

www.jxlcd.com

22 / 26

Figure. 8-3 Packing method

Version 2.2

Doc. No.: 2405X067

Issued Date: Aug.16, 2006

Model No.: M240J1-L01

Approval

9. DEFINITION OF LABELS

9.1 CMO MODULE LABEL

The barcode nameplate is pasted on each module as illustration, and its definitions are as following explanation.

(a) Model Name: M240J1-L01 (b) Revision: Rev. XX, for example: A0, A1… B1, B2… or C1, C2…etc. (c) CMO barcode definition:

Serial ID: XX

Code Meaning Description

XX CMO internal use XX Revision Cover all the change

X CMO internal use -

XX CMO internal use -

YMD Year, month, day

L Product line # Line 1=1, Line 2=2, Line 3=3, …

www.jxlcd.com

NNNN Serial number Manufacturing sequence of product

(d) Customer’s barcode definition:

Serial ID: CM

Code Meaning Description

CM Supplier code CMO=CM

24J11 Model number M240J1-L01 = 24J11

X Revision code Non ZBD: 1,~,9,0 / ZBD: A~Z X Source driver IC code X Gate driver IC code

-XX-X-XX-YMD-L-NNNN

Year: 2001=1, 2002=2, 2003=3, 2004=4… Month: 1~12=1, 2, 3, ~, 9, A, B, C Day: 1~31=1, 2, 3, ~, 9, A, B, C, ~, W, X, Y, exclude I, O, and U.

-24J11-X-X-X-XX-L-XX-L-YMD-NNNN

Century=1, CLL=2, Demos=3, Epson=4, Fujitsu=5, Himax=6, Hitachi=7, Hynix=8, LDI=9, Matsushita=A, NEC=B, Novatec=C, OKI=D, Philips=E, Renasas=F, Samsung=G, Sanyo=H, Sharp=I, TI=J, Topro=K, Toshiba=L, Windbond=M

XX Cell location Tainan Taiwan=TN, Ningbo China=CN

L Cell line # 1~12=0~C

XX Module location Tainan Taiwan=TN, Ningbo China=CN

L Module line # 1~12=0~C

Year: 2001=1, 2002=2, 2003=3, 2004=4…

YMD Year, month, day

NNNN Serial number By LCD supplier

Month: 1~12=1, 2, 3, ~, 9, A, B, C Day: 1~31=1, 2, 3, ~, 9, A, B, C, ~, T, U, V

23 / 26

Version 2.2

Doc. No.: 2405X067

Issued Date: Aug.16, 2006

Model No.: M240J1-L01

Approval

10. PRECAUTIONS

10.1 ASSEMBL Y AND HANDLING PRECAUTIONS

(1) Do not apply rough force such as bending or twisting to the module during assembly. (2) To assemble or install module into user’s system can be only in clean working areas. The dust and oil

may cause electrical short or worsen the polarizer.

(3) It’s not permitted to have pressure or impulse on the module because the LCD panel and Backlight will

be damaged.

(4) Always follow the correct power sequence when LCD module is connecting and operating. This can

prevent damage to the CMOS LSI chips during latch-up. (5) Do not pull the I/F connector in or out while the module is operating. (6) Do not disassemble the module. (7) Use a soft dry cloth without chemicals for cleaning, because the surface of polarizer is very soft and

easily scratched. (8) It is dangerous that moisture come into or contacted the LCD module, because moisture may damage

LCD module when it is operating. (9) High temperature or humidity may reduce the performance of module. Please store LCD module within

the specified storage conditions. (10) When ambient temperature is lower than 10ºC may reduce the display quality. For example, the

response time will become slowly, and the starting voltage of CCFL will be higher than room

temperature.

www.jxlcd.com

10.2 SAFETY PRECAUTIONS

(1) The startup voltage of Backlight is approximately 1000 Volts. It may cause electrical shock while

assembling with inverter. Do not disa ssemble the module or insert anything into the Backlight unit. (2) If the liquid crystal material leaks from the panel, it should be kept away from the eyes or mouth. In

case of contact with hands, skin or clothes, it has to be washe d away thoroughly with soap. (3) After the module’s end of life, it is not harmful in case of normal operation and storage.

www.jxlcd.com

24 / 26

Version 2.2

www.jxlcd.com

Datasheet M240J1-L01 Product Information (CHIMEI)

Specifications and Main Features

Frequently Asked Questions

User Manual