Datasheet M236HGE Product Information (CHIMEI)

TFT-LCD PRODUCT

SPECIFICATION

Manufactured by:

PART NUMBER: USMP-M236HGE-L23

DESCRIPTION:

ISSUE DATE APPROVED BY

(Customer Use Only)

PROPRIETARY

NOTE:

THIS SPECIFICATION IS THE PROPERTY OF US MICRO PRODUCTS AND SHALL NOT BE REPRODUCED OR

COPIED WITHOUT THE WRITTEN PERMISSION OF US MICRO PRODUCTS AND MUST BE RETURNED TO

23.6” TFT LCD with 1920x1080 resolution & WLED backlight,

30-pin-and-2ch LVDS interface,

16.7M colors

CHECKED BY PREPARED BY

US MICRO PRODUCTS UPON ITS REQUEST.

PRODUCT SPECIFICATION

Customer: Common

USMP-M236HGE-L23 ver 3 1

www.usmicroproducts.com

800-741-7755

CONFIDENTIAL

Doc. Number :

□ Tentative Specification □ Preliminary Specification

■ Approval Specification

MODEL NO.: M236HGE

SUFFI

APPROVED BY SIGNATURE

Name / Title

Note Product Version C1/C2

Please return 1 copy for your confirmation with your signature and comments.

X: L23

Approved By Checked By Prepared By

吳柏勳

Version 3.1 14 May 2012 1 / 28

吳柏勳吳柏勳

copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited.

梁永祥

梁永祥梁永祥

黃世中

黃世中黃世中

PRODUCT SPECIFICATION

USMP-M236HGE-L23 ver 3 1

www.usmicroproducts.com

800-741-7755

CONFIDENTIAL

CONTENTS

1. GENERAL DESCRIPTION ...................................................................................................... 5

1.1 OVERVIEW ....................................................................................................................... 5

1.2 GENERAL SPECIFICATIONS ........................................................................................... 5

2. MECHANICAL SPECIFICATIONS .......................................................................................... 5

3. ABSOLUTE MAXIMUM RATINGS .......................................................................................... 5

3.1 ABSOLUTE RATINGS OF ENVIRONMENT...................................................................... 5

3.2 ELECTRICAL ABSOLUTE RATINGS ................................................................................ 6

3.2.1 TFT LCD MODULE .................................................................................................... 6

3.2.2 BACKLIGHT UNIT...................................................................................................... 6

4. ELECTRICAL SPECIFICATIONS ............................................................................................ 7

4.1 FUNCTION BLOCK DIAGRAM ......................................................................................... 7

4.2. INTERFACE CONNECTIONS .......................................................................................... 7

4.3 ELECTRICAL CHARACTERISTICS.................................................................................. 9

4.3.1 LCD ELETRONICS SPECIFICATION ........................................................................ 9

4.3.2 Vcc Power Dip Condition...........................................................................................11

4.3.3 BACKLIGHT UNIT.....................................................................................................11

4.3.4 LIGHTBAR Connector Pin Assignment .................................................................... 12

4.4 LVDS INPUT SIGNAL SPECIFICATIONS ....................................................................... 13

4.4.1 LVDS DATA MAPPING TABLE ................................................................................. 13

4.4.2 COLOR DATA INPUT ASSIGNMENT....................................................................... 14

4.5 DISPLAY TIMING SPECIFICATIONS .............................................................................. 15

4.6 POWER ON/OFF SEQUENCE........................................................................................ 17

5. OPTICAL CHARACTERISTICS ............................................................................................ 18

5.1 TEST CONDITIONS ........................................................................................................ 18

5.2 OPTICAL SPECIFICATIONS ........................................................................................... 18

6. RELIABILITY TEST ITEM ..................................................................................................... 21

7. PACKING............................................................................................................................... 22

7.1 PACKING SPECIFICATIONS .......................................................................................... 22

7.2 PACKING METHOD ........................................................................................................ 22

7.3 PALLET............................................................................................................................ 23

8. CMI MODULE LABEL ........................................................................................................... 24

9. PRECAUTIONS ..................................................................................................................... 25

9.1 ASSEMBLY AND HANDLING PRECAUTIONS ............................................................... 25

9.2 STORAGE PRECAUTIONS ............................................................................................ 25

9.3 OPERATION PRECAUTIONS ......................................................................................... 25

Version 3.1 14 May 2012 2 / 28

copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited.

PRODUCT SPECIFICATION

USMP-M236HGE-L23 ver 3 1

www.usmicroproducts.com

800-741-7755

CONFIDENTIAL

9.4 SAFETY PRECAUTIONS................................................................................................ 26

9.5 SAFETY STANDARDS.................................................................................................... 26

9.6 OTHER ............................................................................................................................ 26

Appendix. OUTLINE DRAWING............................................................................................... 26

Version 3.1 14 May 2012 3 / 28

copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited.

PRODUCT SPECIFICATION

USMP-M236HGE-L23 ver 3 1

www.usmicroproducts.com

800-741-7755

CONFIDENTIAL

REVISION HISTORY

Version Date Section Description

3.0 2012.3.13 All Approval Specification was first issued.

3.1 2012.05.03 4.2

4.3.3

4.3.4

6

Note (1): add equivalent LVDS connector type

LED Life Time, Min. 40000hrs -> 50000Hrs

Note (1), Note (2): add equivalent light bar connector type

Altitude Test: Operation:10,000 ft -> 16,404 ft

Version 3.1 14 May 2012 4 / 28

copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited.

PRODUCT SPECIFICATION

USMP-M236HGE-L23 ver 3 1

www.usmicroproducts.com

800-741-7755

CONFIDENTIAL

1. GENERAL DESCRIPTION

1.1 OVERVIEW

M236HGE-L23 is a 23.6” TFT Liquid Crystal Display module with WLED Backlight unit and 30 pins

2ch-LVDS interface. This module supports 1920 x 1080 Full HD mode and can display up to 16.7M colors.

The converter module for Backlight is not built in.

1.2 GENERAL SPECIFICATIONS

Item Specification Unit Note

Screen Size 23.547” real diagonal

Driver Element a-si TFT active matrix - -

Pixel Number 1920 x R.G.B. x 1080 pixel -

Pixel Pitch 0.2715 (H) x 0.2715 (V) mm -

Pixel Arrangement RGB vertical stripe - -

Display Colors 16.7M color -

Transmissive Mode Normally white - -

Surface Treatment AG type, 3H hard coating, Haze 25 - -

Luminance, White 200 Cd/m2

Color Gamut 72% of NTSC(Typ.) -

ROHS,Halogen Free ROHS, Halogen Free -

Power Consumption Total (18.376)W(Max.)@cell 6W (Max.), BL (12.376W) (Max.) (1)

Note (1) The specified power consumption : Total= cell (reference 4.3.1)+BL (reference 4.3.3)

2. MECHANICAL SPECIFICATIONS

Item Min. Typ. Max. Unit Note

Horizontal (H) 544.3 544.8 545.3 mm

Module Size

Bezel Area

Active Area

Note (1) Please refer to the attached drawings for more information of front and back outline dimensions.

Vertical (V) 320.0 320.5 321.0 mm

Thickness (T) 10.5 11.0 11.5 mm

Horizontal 524.92 525.22 525.52 mm

Vertical 296.92 297.22 297.52 mm

Horizontal - 521.28 - mm

Vertical - 293.22 - mm

Weight - 2305 2405 g

3. ABSOLUTE MAXIMUM RATINGS

3.1 ABSOLUTE RATINGS OF ENVIRONMENT

Storage Temperature TST -20 60 ºC (1)

Operating Ambient Temperature TOP 0 50 ºC (1), (2)

Note (1)

Item Symbol

Value

Min. Max.

(1)

Unit Note

(a) 90 %RH Max. (Ta <= 40 ºC).

(b) Wet-bulb temperature should be 39 ºC Max. (Ta > 40 ºC).

(c) No condensation.

Version 3.1 14 May 2012 5 / 28

copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited.

PRODUCT SPECIFICATION

LED Forward Current Per

USMP-M236HGE-L23 ver 3 1

www.usmicroproducts.com

800-741-7755

CONFIDENTIAL

Note (2) The temperature of panel surface should be 0 ºC min. and 60 ºC max.

3.2 ELECTRICAL ABSOLUTE RATINGS

3.2.1 TFT LCD MODULE

Item Symbol

Power Supply Voltage VCCS -0.3 6.0 V

Logic Input Voltage VIN -0.3 3.6 V

3.2.2 BACKLIGHT UNIT

Item Symbol

Input Pin

LED Pulse Forward

Current Per Input Pin

Note (1) Permanent damage to the device may occur if maximum values are exceeded. Function operation

should be restricted to the conditions described under Normal Operating Conditions.

Note (2) Specified values are for input pin of LED light bar at Ta=25±2 ℃ (Refer to 4.3.3 and 4.3.4 for

Value

Min. Max.

Value

Min. Typ Max.

IF 0 65 69 mA

IP --- --- 150 mA

Unit Note

(1)

(1), (2)

Duty=100%

(1), (2)

Pulse Width≦10msec.

and Duty≦30%

further information).

Version 3.1 14 May 2012 6 / 28

copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited.

4. ELECTRICAL SPECIFICATIONS

USMP-M236HGE-L23 ver 3 1

www.usmicroproducts.com

800-741-7755

CONFIDENTIAL

4.1 FUNCTION BLOCK DIAGRAM

PRODUCT SPECIFICATION

4.2. INTERFACE CONNECTIONS

PIN ASSIGNMENT

Pin Name Description

1 RXO0- Negative LVDS differential data input. Channel O0 (odd) 2 RXO0+ Positive LVDS differential data input. Channel O0 (odd) 3 RXO1- Negative LVDS differential data input. Channel O1 (odd) 4 RXO1+ Positive LVDS differential data input. Channel O1 (odd) 5 RXO2- Negative LVDS differential data input. Channel O2 (odd) 6 RXO2+ Positive LVDS differential data input. Channel O2 (odd) 7 GND Ground 8 RXOC- Negative LVDS differential clock input. (odd) 9 RXOC+ Positive LVDS differential clock input. (odd)

10 RXO3- Negative LVDS differential data input. Channel O3(odd)

11 RXO3+ Positive LVDS differential data input. Channel O3 (odd) 12 RXE0- Negative LVDS differential data input. Channel E0 (even) 13 RXE0+ Positive LVDS differential data input. Channel E0 (even) 14 GND Ground 15 RXE1- Negative LVDS differential data input. Channel E1 (even) 16 RXE1+ Positive LVDS differential data input. Channel E1 (even) 17 GND Ground 18 RXE2- Negative LVDS differential data input. Channel E2 (even) 19 RXE2+ Positive LVDS differential data input. Channel E2 (even) 20 RXEC- Negative LVDS differential clock input. (even) 21 RXEC+ Positive LVDS differential clock input. (even) 22 RXE3- Negative LVDS differential data input. Channel E3 (even) 23 RXE3+ Positive LVDS differential data input. Channel E3 (even) 24 GND Ground 25 NC For LCD internal use only, Do not connect

Version 3.1 14 May 2012 7 / 28

copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited.

PRODUCT SPECIFICATION

Pitch

USMP-M236HGE-L23 ver 3 1

www.usmicroproducts.com

800-741-7755

CONFIDENTIAL

Pin Name Description

26 NC For LCD internal use only, Do not connect 27 NC For LCD internal use only, Do not connect 28 Vcc +5.0V power supply 29 Vcc +5.0V power supply 30 Vcc +5.0V power supply

Note (1) Connector Part No.:

GS23301-0321R-7H (Foxconn) or 187098-30091 (P-TWO) or WF13-422-3033 (FCN) or equivalent

Note (2) User’s connector Part No:

Mating Wire Cable Connector Part No.: FI-X30H(JAE) or FI-X30HL(JAE)

Mating FFC Cable Connector Part No.: 217007-013001 (P-TWO) or JF05X030-1 (JAE).

Note (3) The first pixel is odd.

Note (4) Input signal of even and odd clock should be the same timing.

1,1

(odd)

2,1

3,1

1,2

(even)

2,2

1,3

(odd)

1,4

(even)

1,Xmax

Pitch

Ymax,1

Version 3.1 14 May 2012 8 / 28

copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited.

Ymax,

Xmax

4.3 ELECTRICAL CHARACTERISTICS

USMP-M236HGE-L23 ver 3 1

www.usmicroproducts.com

800-741-7755

CONFIDENTIAL

4.3.1 LCD ELETRONICS SPECIFICATION

Parameter Symbol

Power Supply Voltage Vcc 4.5 5.0 5.5 V -

Ripple Voltage VRP - - 300 mV -

Rush Current I

White - 0.41 0.43 A (3)a

Power Supply Current

Power Consumption PLCD

LVDS differential input voltage Vid 200 - 600 mV

LVDS common input voltage Vic 1.0 1.2 1.4 V

Logic High Input Voltage VIH 2.64 - 3.6 V Logic Low Input Voltage VIL 0 - 0.66 V

Note (1) The ambient temperature is Ta = 25 ± 2 ºC.

Note (2) Measurement Conditions:

Black - 1.04 1.20 A (3)b

Vertical Stripe

PRODUCT SPECIFICATION

RUSH

Value

Min. Typ. Max.

- 1.52 3 A (2)

- 0.94 1.03 A (3)c

- 5.2 6.00 Watt (4)

Unit Note

Version 3.1 14 May 2012 9 / 28

copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited.

PRODUCT SPECIFICATION

USMP-M236HGE-L23 ver 3 1

www.usmicroproducts.com

800-741-7755

CONFIDENTIAL

Note (3) The specified max power supply current is under the conditions at Vcc = 5.0 V, Ta = 25 ± 2 ºC, Fr =

75Hz, whereas a power dissipation check pattern below is displayed.

Note (4) The power consumption is specified at the pattern with the maximum current.

Note (5) VID waveform condition

Version 3.1 14 May 2012 10 / 28

copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited.

PRODUCT SPECIFICATION

≤≤≤

USMP-M236HGE-L23 ver 3 1

www.usmicroproducts.com

800-741-7755

CONFIDENTIAL

4.3.2 Vcc Power Dip Condition

msTdVVccV 20,5.40.4

4.3.3 BACKLIGHT UNIT

Parameter Symbol

LED Light Bar Input

Voltage Per Input Pin

LED Light Bar Current

Per Input Pin

LED Life Time LLED 50000 Hrs (3)

Power Consumption

Note (1) LED light bar input voltage and current are measured by utilizing a true RMS multimeter as shown

VPIN --- 43.4 47.6 V

IPIN 0 65 69 mA

PBL --- 11.284 12.376 W

Min. Typ. Max.

Value

Unit Note

(1),

Duty=100%,

IPIN=65mA

(1), (2)

Duty=100%

(1)

Duty=100%,

IPIN=65mA

below:

Note (2) PBL(Typ) = IPIN(Typ) × VPIN(Typ) × ( 4 ) PBL(Max) = IPIN(Typ) × VPIN(Max) × ( 4 ) input pins.

Note (3) The lifetime of LED is defined as the time when LED packages continue to operate under the

conditions at Ta = 25 ±2 ℃ and I= (65)mA (per chip) until the brightness becomes ≦ 50% of its original

value.

Note (4) The module must be operated with constant driving current.

Version 3.1 14 May 2012 11 / 28

copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited.

PRODUCT SPECIFICATION

USMP-M236HGE-L23 ver 3 1

www.usmicroproducts.com

800-741-7755

CONFIDENTIAL

4.3.4 LIGHTBAR Connector Pin Assignment

Connector:WM13-406-063N (FCN)

Other equivalents please refer to individual drawing

CN1

Pin number

1 Cathode of LED string 2 Cathode of LED string 3 VLED 4 VLED 5 Cathode of LED string 6 Cathode of LED string

Note (1) Connector(wire type):FCN(WM13-406-063N) or Entery(3707K-Q06N-08L)

or CviLux( CI1406M1HRK-NH) or equivalent.

Note (2) User’s mating connector part No.:

FCN( WF1300106-B) or Entery(H112K-P06N-01B or M001-E11N-00R) or CviLux( CI1406SL000-NH)

and hook width must be less than 4.5mm..

Description

Version 3.1 14 May 2012 12 / 28

copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited.

4.4 LVDS INPUT SIGNAL SPECIFICATIONS

USMP-M236HGE-L23 ver 3 1

www.usmicroproducts.com

800-741-7755

CONFIDENTIAL

4.4.1 LVDS DATA MAPPING TABLE

LVDS Channel O0

LVDS Channel O1

LVDS Channel O2

LVDS Channel O3

LVDS Channel E0

LVDS Channel E1

LVDS Channel E2

LVDS Channel E3

LVDS output

Data order OG0 OR5 OR4 OR3 OR2 OR1 OR0

LVDS output

Data order OB1 OB0 OG5 OG4 OG3 OG2 OG1

LVDS output

Data order DE NA NA OB5 OB4 OB3 OB2

LVDS output

Data order NA OB7 OB6 OG7 OG6 OR7 OR6

LVDS output

Data order EG0 ER5 ER4 ER3 ER2 ER1 ER0

LVDS output

Data order EB1 EB0 EG5 EG4 EG3 EG2 EG1

LVDS output

Data order DE NA NA EB5 EB4 EB3 EB2

LVDS output

Data order NA EB7 EB6 EG7 EG6 ER7 ER6

D7 D6 D4 D3 D2 D1 D0

D18 D15 D14 D13 D12 D9 D8

D26 D25 D24 D22 D21 D20 D19

D23 D17 D16 D11 D10 D5 D27

D7 D6 D4 D3 D2 D1 D0

D18 D15 D14 D13 D12 D9 D8

D26 D25 D24 D22 D21 D20 D19

D23 D17 D16 D11 D10 D5 D27

PRODUCT SPECIFICATION

Version 3.1 14 May 2012 13 / 28

copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited.

PRODUCT SPECIFICATION

USMP-M236HGE-L23 ver 3 1

www.usmicroproducts.com

800-741-7755

CONFIDENTIAL

4.4.2 COLOR DATA INPUT ASSIGNMENT

The brightness of each primary color (red, green and blue) is based on the 8-bit gray scale data input for the

color. The higher the binary input, the brighter the color. The table below provides the assignment of color

versus data input.

Data Signal

Color

R7 R6 R5 R4 R3 R2 R1 R0

Black

Red

Green

Basic

Colors

Gray

Scale

Of

Red

Gray

Scale

Of

Green

Gray

Scale

Of

Blue

Note (1) 0: Low Level Voltage, 1: High Level Voltage

Blue

Cyan

Magenta

Yellow

White

Red(0) / Dark

Red(1) Red(2)

:

: Red(253) Red(254) Red(255)

Green(0) / Dark

Green(1) Green(2)

:

Green(253) Green(254) Green(255)

Blue(0) / Dark

Blue(1) Blue(2)

:

Blue(253) Blue(254) Blue(255)

0

1

0

1

0

:

1

0

:

0

:

0

Red Green Blue

G

7

6

0

1

0

1

0

1

0

1

0

1

0

1

0

:

1

0

:

0

:

0

:

1

0

1

0

:

0

:

0

:

1

0

1

0

:

0

1

0

1

0

1

0

:

0

G3 G2 G1 G0

5

4

0

1

0

1

0

1

0

:

0

:0

0

:

1

0

:

0

1

0

1

0

1

0

:

0

1

:

1

0

1

0

:

0

B

B6 B5 B4 B3 B2

7

0

1

0

1

0

1

0

1

0

:

: :

0

1

0

:

1

0

1

0

:

0

1

0

1

0

1

B 1

0

1

0

1

0

:

0

:

0

1

:

1

0

1

B 0 0 0 0 1 1 1 0 1 0 0 0

:

:0

0 0 0 0 0

:

: 0 0 0 0 1 0

:

: 1 0 1

Version 3.1 14 May 2012 14 / 28

copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited.

PRODUCT SPECIFICATION

USMP-M236HGE-L23 ver 3 1

www.usmicroproducts.com

800-741-7755

CONFIDENTIAL

4.5 DISPLAY TIMING SPECIFICATIONS

The input signal timing specifications are shown as the following table and timing diagram.

Signal Item Symbol Min. Typ.

Frequency

Period Tc - 13.47

Input cycle to

cycle jitter

Input Clock

to data skew

LVDS Clock

Vertical Display Term

Horizontal Display Term

Note: Because this module is operated by DE only mode, Hsync and Vsync input signals are ignored.

Spread

spectrum

modulation

range

Spread

spectrum

modulation

frequency

Frame Rate

Total Tv 1115 1125 1136 Th -

Active

Display

Blank Tvb 35 45 56 Th -

Total Th 1050 1100 1150 Tc Th=Thd+Thb

Active

Display

Blank Thb 90 140 190 Tc -

Fc 58.54 74.25

T

-0.02*Tc

rcl

TLVCCS

F

clkin_mod

F

- - 200 KHz

SSM

Fr 50 60 75 Hz Tv=Tvd+Tvb

Tvd 1080 1080 1080 Th -

Thd 960 960 960 Tc -

- - 400 ps (2)

0.97*Fc

- 0.02*Tc ns (1)

- 1.03*Fc MHz

Max. Unit

98 MHz

- ns

Note

-

(3)

INPUT SIGNAL TIMING DIAGRAM

Version 3.1 14 May 2012 15 / 28

copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited.

PRODUCT SPECIFICATION

USMP-M236HGE-L23 ver 3 1

www.usmicroproducts.com

800-741-7755

CONFIDENTIAL

Note (1) The input clock cycle-to-cycle jitter is defined as below figures. Trcl = I T1 – TI

Note (2) Input Clock to data skew is defined as below figures.

t

Note (3) The SSCG (Spread spectrum clock generator) is defined as below figures.

Version 3.1 14 May 2012 16 / 28

copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited.

PRODUCT SPECIFICATION

USMP-M236HGE-L23 ver 3 1

www.usmicroproducts.com

800-741-7755

CONFIDENTIAL

4.6 POWER ON/OFF SEQUENCE

The power sequence specifications are shown as the following table and diagram.

Timing Specifications:

Parameters

T1 0.5 - 10 ms T2 T3 450 - - ms T4 90 - - ms T5 0 - 50 ms T6 5 - 150 ms T7 500 - - ms

Note (1) The supply voltage of the external system for the module input should be the same as the definition

of Vcc.

Note (2) When the backlight turns on before the LCD operation of the LCD turns off, the display may

momentarily become abnormal screen.

Note (3) In case of VCC = off level, please keep the level of input signals on the low or keep a high

impedance.

Note (4) T4 should be measured after the module has been fully discharged between power off and on

period.

Note (5) Interface signal shall not be kept at high impedance when the power is on.

Min Typ. Max

0 - 50 ms

Values

Units

Note (6) CMI won’t take any responsibility for the products which are damaged by the customers not

following the Power Sequence.

Note (7) There might be slight electronic noise when LCD is turned off (even backlight unit is also off). To

avoid this symptom, we suggest "Vcc falling timing" to follow "t6 spec".

Version 3.1 14 May 2012 17 / 28

copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited.

PRODUCT SPECIFICATION

USMP-M236HGE-L23 ver 3 1

www.usmicroproducts.com

800-741-7755

CONFIDENTIAL

5. OPTICAL CHARACTERISTICS

5.1 TEST CONDITIONS

Item Symbol Value Unit

Ambient Temperature Ta

Ambient Humidity Ha

Supply Voltage VCC 5 V

Input Signal According to typical value in "3. ELECTRICAL CHARACTERISTICS"

LED Light Bar Input Current

Per Input Pin

PWM Duty Ratio D 100 %

LED Light Bar Test Converter

65± 1.95 mADC

I

25±2

50±10

CMI 35-D065452

5.2 OPTICAL SPECIFICATIONS

The relative measurement methods of optical characteristics are shown in 5.2. The following items should be

measured under the test conditions described in 5.1 and stable environment shown in Note (5).

Item Symbol

Red

Color

Chromaticity

(CIE 1931)

Center Luminance of White

(Center of Screen)

Contrast Ratio CR

Response Time

White Variation

Viewing Angle

Green

Blue

White

Horizontal

Vertical

Rx 0.641

Ry 0.338

Gx 0.315 Gy 0.629

Bx 0.159

By 0.059

Wx 0.313

Wy

L

C

TR - 1.5 2.5

TF

δW θx=0°, θY =0°

θx- + θx+ θy- + θy+

Condition Min. Typ. Max. Unit Note

θ

=0°, θY =0°

x

CS-2000

R=G=B=255

Gray scale

θx=0°, θY =0°

CR ≧ 10

Typ –

0.03

0.329

150 200 - cd/m

500 700 - - (2), (5)

- 3.5 5.5

70 % (5), (6)

90 65 -

Typ +

0.03

o

C

%RH

- (1), (5)

ms (3)

Deg. (1), (5)

2

(4), (5)

Version 3.1 14 May 2012 18 / 28

copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited.

Note (1) Definition of Viewing Angle (θx, θy):

USMP-M236HGE-L23 ver 3 1

www.usmicroproducts.com

800-741-7755

CONFIDENTIAL

PRODUCT SPECIFICATION

Note (2) Definition of Contrast Ratio (CR):

The contrast ratio can be calculated by the following expression.

Contrast Ratio (CR) = L255 / L0

L255: Luminance of gray level 255

L 0: Luminance of gray level 0

CR = CR (5)

CR (X) is corresponding to the Contrast Ratio of the point X at Figure in Note (6).

Note (3) Definition of Response Time (T

R

, TF):

Version 3.1 14 May 2012 19 / 28

copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited.

Note (4) Definition of Luminance of White (LC):

USMP-M236HGE-L23 ver 3 1

www.usmicroproducts.com

800-741-7755

CONFIDENTIAL

PRODUCT SPECIFICATION

Measure the luminance of gray level 255 at center point

LC = L (5)

L (x) is corresponding to the luminance of the point X at Figure in Note (6).

Note (5) Measurement Setup:

The LCD module should be stabilized at given temperature for 40 minutes to avoid abrupt

temperature change during measuring. In order to stabilize the luminance, the measurement should

be executed after lighting Backlight for 40 minutes in a windless room.

Note (6) Definition of White Variation (δW):

Measure the luminance of gray level 255 at 9 points

δW = Minimum [L (1) ~ L (9)] / Maximum [L (1) ~ L (9)]

Version 3.1 14 May 2012 20 / 28

copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited.

PRODUCT SPECIFICATION

USMP-M236HGE-L23 ver 3 1

www.usmicroproducts.com

800-741-7755

CONFIDENTIAL

6. RELIABILITY TEST ITEM

Items Required Condition Note Temperature Humidity Bias (THB) High Temperature Operation (HTO)

Low Temperature Operation (LTO) High Temperature Storage (HTS) Low Temperature Storage (LTS)

Vibration Test (Non-operation)

Shock Test (Non-operation)

Thermal Shock Test (TST) On/Off Test

ESD (Electro Static Discharge)

Altitude Test

Note (1) criteria : Normal display image with no obvious non-uniformity and no line defect.

Ta= 50℃ , 80%RH, 240hours Ta= 50℃ , 240hours

Ta= 0℃ , 240hours Ta= 60℃ , 240hours Ta= -20℃ , 240hours Acceleration: 1.5 Grms

Wave: Half-sine Frequency: 10 - 300 Hz Sweep: 30 Minutes each Axis (X, Y, Z) Acceleration: 50 G Wave: Half-sine Active Time: 11 ms Direction : ± X, ± Y, ± Z.(one time for each Axis)

-20℃/30min , 60℃ / 30min , 100 cycles 25℃ ,On/10sec , Off /10sec , 30,000 cycles Contact Discharge: ± 8KV, 150pF(330Ω)

Air Discharge: ± 15KV, 150pF(330Ω) Operation:16,404 ft / 24hours Non-Operation:30,000 ft / 24hours

Note (2) Evaluation should be tested after storage at room temperature for more than two hour

Note (3) At testing Vibration and Shock, the fixture in holding the module has to be hard and rigid enough so

that the module would not be twisted or bent by the fixture.

The fixing condition is shown as below:

At Room Temperature

Version 3.1 14 May 2012 21 / 28

copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited.

PRODUCT SPECIFICATION

USMP-M236HGE-L23 ver 3 1

www.usmicroproducts.com

800-741-7755

CONFIDENTIAL

7. PACKING

7.1 PACKING SPECIFICATIONS

(1) 11 LCD modules / 1 Box

(2) Box dimensions: 620(L) X 348(W) X 430(H) mm

(3) Weight: approximately: 30.1KG

7.2 PACKING METHOD

(1) Carton Packing should have no failure in the following reliability test items.

Test Item Test Conditions Note

ISTA STANDARD

Random, Frequency Range: 1 – 200 Hz

Vibration

Dropping Test 1 Corner , 3 Edge, 6 Face, 31cm Non Operation

Top & Bottom: 30 minutes (+Z), 10 min (-Z),

Right & Left: 10 minutes (X)

Back & Forth 10 minutes (Y)

Non Operation

Version 3.1 14 May 2012 22 / 28

copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited.

Figure. 7-1 Packing method

7.3 PALLET

USMP-M236HGE-L23 ver 3 1

www.usmicroproducts.com

800-741-7755

CONFIDENTIAL

For ocean shipping

PRODUCT SPECIFICATION

Sea / Land Transportation (40ft HQ Container)

Film

PE Sheet

Corner Protector (50*50*1000mm)

PP Belt

Carton label

Corner Protector (50*50*800mm)

Corner Protector (50*50*1250mm)

Pallet (1250*1050*143mm)

For air transport

Corner Protector (50*50*1000mm)

Sea / Land Transportation (40ft Container)

PP Belt

Carton label

Corner Protector (50*50*800mm)

Pallet

0*1050*143mm)

(125

PE Sheet

Film

PP Belt

PE Sheet

Corner Protector (50*50*1000mm)

Film

PE Sheet

Carton label

Figure. 7-2 Packing method

Corner Protector (50*50*1250mm)

Pallet (1250*1050*143mm)

Version 3.1 14 May 2012 23 / 28

copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited.

PRODUCT SPECIFICATION

Day: 1~31=1, 2, 3, ~, 9, A, B, C, ~, T, U, V

USMP-M236HGE-L23 ver 3 1

www.usmicroproducts.com

800-741-7755

CONFIDENTIAL

8. CMI MODULE LABEL

The barcode nameplate is pasted on each module as illustration, and its definitions are as following

explanation.

(a) Model Name: M236HGE-L23

(b) Revision: Rev. XX, for example: A0, A1… B1, B2… or C1, C2…etc.

(c) CMI barcode definition:

Serial ID: XX-XX-X-XX-YMD-L-NNNN

Code Meaning Description

XX CMI internal use -

XX Revision Cover all the change

X CMI internal use -

XX CMI internal use -

Year: 0~9, 2001=1, 2002=2, 2003=3…2010=0, 2011=1, 2012=2…

YMD Year, month, day

Day: 1~31=1, 2, 3, ~, 9, A, B, C, ~, W, X, Y, exclude I, O, and U.

L Product line # Line 1=1, Line 2=2, Line 3=3, …

NNNN Serial number Manufacturing sequence of product

(d) Customer’s barcode definition:

Serial ID: CM- N6E23-X-X-X-XX-L-XX-L-YMD-NNNN

Code Meaning Description

CM Supplier code CMI=CM

N6E23

X Revision code Non ZBD: 1,2,~,8,9 / ZBD: A~Z

X Source driver IC code

X Gate driver IC code

XX Cell location Tainan Taiwan=TN, Ningbo China=CN, Hsinchu Taiwan=SC

L Cell line #

Model number M236HGE-L23= N6E23

Century=1, CLL=2, Demos=3, Epson=4, Fujitsu=5, Himax=6,

Hitachi=7, Hynix=8, LDI=9, Matsushita=A, NEC=B, Novatec=C,

OKI=D, Philips=E, Renasas=F, Samsung=G, Sanyo=H, Sharp=I, TI=J,

Topro=K, Toshiba=L, Windbond=M, ILITEK=Q, Fiti=Y, None IC =Z

Month: 1~12=1, 2, 3, ~, 9, A, B, C

1,2,~,9,A,B,~,Y,Z

XX Module location Tainan, Taiwan=TN ; Ningbo China=NP, Shenzhen China=SH

L Module line #

YMD Year, month, day

NNNN

Serial number By LCD supplier

Version 3.1 14 May 2012 24 / 28

copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited.

1,2,~,9,A,B,~,Y,Z

Year: 0~9, 2001=1, 2002=2, 2003=3…2010=0, 2011=1, 2012=2…

Month: 1~12=1, 2, 3, ~, 9, A, B, C

PRODUCT SPECIFICATION

USMP-M236HGE-L23 ver 3 1

www.usmicroproducts.com

800-741-7755

CONFIDENTIAL

(e) FAB ID(UL Factory ID):

Region Factory ID

TWCMI GEMN

NBCMI LEOO

NBCME

NHCMI CAPG

9. PRECAUTIONS

9.1 ASSEMBLY AND HANDLING PRECAUTIONS

(1) Do not apply rough force such as bending or twisting to the module during assembly.

(2) To assemble or install module into user’s system can be only in clean working areas. The dust and oil

may cause electrical short or worsen the polarizer.

(3) It’s not permitted to have pressure or impulse on the module because the LCD panel and Backlight will

be damaged.

CANO

(4) Always follow the correct power sequence when LCD module is connecting and operating. This can

prevent damage to the CMOS LSI chips during latch-up.

(5) Do not pull the I/F connector in or out while the module is operating.

(6) Do not disassemble the module.

(7) Use a soft dry cloth without chemicals for cleaning, because the surface of polarizer is very soft and

easily scratched.

(8) It is dangerous that moisture come into or contacted the LCD module, because moisture may damage

LCD module when it is operating.

(9) High temperature or humidity may reduce the performance of module. Please store LCD module within

the specified storage conditions.

(10)When ambient temperature is lower than 10ºC may reduce the display quality. For example, the

response time will become slowly.

9.2 STORAGE PRECAUTIONS

(1) Do not leave the module in high temperature, and high humidity for a long time. It is highly recommended

to store the module with temperature from 0℃ to 35℃ and relative humidity of less than 70%

(2) Do not store the TFT – LCD module in direct sunlight

(3) The module should be stored in dark place. It is prohibited to apply sunlight or fluorescent light in storing

9.3 OPERATION PRECAUTIONS

(1) The LCD product should be operated under normal condition.

Normal condition is defined as below :

Temperature : 20±15℃

Humidity: 65±20%

Display pattern : continually changing pattern(Not stationary)

Version 3.1 14 May 2012 25 / 28

copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited.

PRODUCT SPECIFICATION

USMP-M236HGE-L23 ver 3 1

www.usmicroproducts.com

800-741-7755

CONFIDENTIAL

(2) If the product will be used in extreme conditions such as high temperature,high humidity,high

altitude ,display pattern or operation time etc…It is strongly recommended to contact CMI for application

engineering advice . Otherwise , Its reliability and function may not be guaranteed.

9.4 SAFETY PRECAUTIONS

(1) If the liquid crystal material leaks from the panel, it should be kept away from the eyes or mouth. In case

of contact with hands, skin or clothes, it has to be washed away thoroughly with soap.

(2) After the module’s end of life, it is not harmful in case of normal operation and storage.

9.5 SAFETY STANDARDS

The LCD module should be certified with safety regulations as follows:

(1) UL60950-1 or updated standard.

(2) IEC60950-1 or updated standard.

9.6 OTHER

When fixed patterns are displayed for a long time, remnant image is likely to occur.

Appendix. OUTLINE DRAWING

Version 3.1 14 May 2012 26 / 28

copyright belongs to CHIMEI InnoLux. Any unauthorized use is prohibited.

USMP-M236HGE-L23

Displays

OLEDs TFT Display Open Frame Monitors

Passive LCDs Multitouch Touch Screen

www.usmicroproducts.com

LOS ANGELES • AUSTIN • NEW YORK • LONDON • SHENZHEN • TAICHUNG

US Micro Products is an industrial distributor specializing in engineered display solutions. We dedicate ourselves to providing the best in displays for the medical, industrial, gaming, automotive, aerospace, military and consumer markets.

(800) 741.7755

As our customer, you receive expert knowledge, support and service. Our technical sales staff and experienced design engineers provide answers to your questions and engineered solutions to meet your display needs.

Peripheral Devices

Keyboards

Our full line of peripheral devices includes keyboards, trackballs and printers. These rugged industrial products are designed to meet the rigorous demands of your equipment and are available

in a variety of standard and custom options.

Aerospace

Trackballs

6207 Bee Caves Rd., Suite 330, Austin, TX 78746 U.S.A. Tel. 800-741-7755 • International Tel. 01-512-385-9000 • Fax. 512-385-9002 www.usmicroproducts.com

Trackballs

Printers

Datasheet M236HGE Product Information (CHIMEI)

Specifications and Main Features

Frequently Asked Questions

User Manual