Page 1
Doc No.: 400032833
Issued Date: Sep, 24, 2009
Model No.: M215H3-L01
Approval
TFT LCD Approval Specification
MODEL NO.: M215H3-L01
Customer :
Approved by :
Note :
www.jxlcd.com
www.jxlcd.com
核准時間 部門 審核 角色 投票
2009-10-05
09:58:29
MTR
產品管理處
吳
2009.10.05
柏 勳
Director Accept
1 / 29
Version 2.1
Page 2
Doc No.: 400032833
Issued Date: Sep, 24, 2009
Model No.: M215H3-L01
Approval
- CONTENTS -
REVISION HISTORY ------------------------------------------------------- 3
1. GENERAL DESCRIPTION
1.1 OVERVIEW
1.2 FEATURES
1.3 APPLICATION
1.4 GENERAL SPECIFICATIONS
1.5 MECHANICAL SPECIFICATIONS
2. ABSOLUTE MAXIMUM RATINGS ------------------------------------------------------- 5
2.1 ABSOLUTE RATI NGS OF ENVIRONMENT
2.2 ELECTRICAL ABSOLUTE RATINGS
2.2.1 TFT LCD MODULE
2.2.2 BACKLIGHT UNIT
3. ELECTRICAL CHARACTERISTICS ------------------------------------------------------- 7
3.1 TFT LCD MODULE
3.2 BACKLIGHT UNIT
4. BLOCK DIAGRAM ------------------------------------------------------- 10
4.1 TFT LCD MODULE
4.2 BACKLIGHT UNIT
5. INPUT TERMINAL PIN ASSIGNMENT ------------------------------------------------------- 12
5.1 TFT LCD MODULE
5.2 BACKLIGHT UNIT
5.3 COLOR DATA INPUT ASSIGNMENT
6. INTERFACE TIMING ------------------------------------------------------- 14
6.1 INPUT SIGNAL TIMING SPECIFICATIONS
6.2 POWER ON/OFF SEQUENCE
7. OPTICAL CHARACTERISTICS ------------------------------------------------------- 16
7.1 TEST CONDITIONS
7.2 OPTICAL SPECIFICATIONS
8. PACKAGING ------------------------------------------------------- 20
8.1 PACKING SPECIFICATIONS
www.jxlcd.com
8.2 PACKING METHOD
www.jxlcd.com
------------------------------------------------------- 4
9. DEFINITION OF LABELS ------------------------------------------------------- 22
9.1 CMO MODULE LABEL
10. RELIABILITY TEST ------------------------------------------------------- 23
11. PRECAUTIONS
1 1.1 ASSEMBL Y AND HANDLING PRECAUTIONS
11.2 SAFETY PRECAUTIONS
11.3 SAFETY STANDARDS
11.4 STORAGE
11.5 OPERATION CONDITION GUIDE
11.6 OTHER
12. MECHANICAL CHARACTERISTICS ------------------------------------------------------- 26
------------------------------------------------------- 24
2 / 29
Version 2.1
Page 3
Doc No.: 400032833
Issued Date: Sep, 24, 2009
Model No.: M215H3-L01
Approval
REVISION HISTORY
Version Date Section Description
M215H3-L01 Specifications was first issued。
1.5
2.2.2
3.1
3.3
5.1
6.1
7.1
8.1
10.0
11.4
11.5
all
All
M215H3-L01 Preliminary specification was first issued.
All
Update module weight to (typ.) 1850g & (max) 1900g
Update light bar Peak pulse current 30mA
Update light bar Input Voltage 29.7(typ), 32.4 (max)
Confirm TFT Module power consumption (5.3W)Æ 5.25W
Update LED light bar connector type: 91500-01001-H01 (Aces)
Insert
Note (2) Mating Wire Cable Connector Part No.: FI-X30H(JAE) or FI-X30HL(JAE)
Note (3) Mating FFC Cable Connector Part No.: 91500-01001-H01(ACES)
INPUT SIGNAL TIMING SPECIFICATIONS
Add LVDS clock item:
Item Symbol Min. Typ. Max. Unit
Input cycle to
cycle jitter
Spread spectrum
modulation range
Spread spectrum
modulation frequency
T
rcl
F
clkin_modFclkin
F
SSM
－ －
-2%
200 KHz
－
200 ps
+2
F
clkin
%
MHz
Add Note(1), Note(2), Note(3)
Confirm Color Chromaticity: Min.Value = Typ. – 0.03,and Max.Value = T y p. + 0.03
Min. Typ. Max. Unit Note
(0.636)
(0.348)
(0.327)
(0.611)
Typ –
0.03
200 250 --- cd/m2(4), (5)
(0.154)
(0.059)
0.313
0.329
Typ +
0.03
(1), (5)
Confirm
(2) Box dimensions: 565(L) X 295 (W) X 375 (H) mm --Original
563(L) X 390 (W) X 375 (H) mm – New
(3) Weight: 26.29 Kg (12 modules per box) --Original
24.96 Kg (12 modules per box) – New
Add CH 10.0 Reliability Test
Add CH
11.4. Storage
Add CH 11.5. Operation condition guide
M215H3-L01 Approval specification was first issued.
Ver 0.0
Ver 1.0
Ver 2.0
May,12,’09
June,25,’09
www.jxlcd.com
www.jxlcd.com
July,22,’09
3 / 29
Version 2.1
Page 4
Doc No.: 400032833
Issued Date: Sep, 24, 2009
Model No.: M215H3-L01
Approval
Ver 2.1 Sep,24,’09 2.2.2
7.2
2.2.2 Back light unit
Modify Back light unit Item
Æ
3.3 Backlight unit
LED Life time add typ value :30000
7.2 OPTICAL SPECIFICATIONS
Modify White Variation δW Max: from 1.33 to 1.42
www.jxlcd.com
www.jxlcd.com
4 / 29
Version 2.1
Page 5
Doc No.: 400032833
Issued Date: Sep, 24, 2009
Model No.: M215H3-L01
1. GENERAL DESCRIPTION
1.1 OVERVIEW
The M215H3-L01 model is a 21.5 inch wide TFT-LCD module with LED Backlight Unit and a 30-pin
2ch-LVDS interface. This module supports 1920 x 1080 Full HD (16:9 wide screen) mode and displays up
to 16.7 millions colors. The converter module for the Backlight Unit is not built in.
1.2 FEATURES
- Super wide viewing angle
- High contrast ratio
- Fast response time
- Low power consumption
- FULL HD(1920 x 1080 pixels) resolution
- DE (Data Enable) only mode
Approval
- LVDS (Low Voltage Differential Signaling) interface
- Lower power consumption
- RoHS compliance.
1.3 APPLICA TION
- Workstation & desktop monitor
- Display terminals for AV application
www.jxlcd.com
1.4 GENERAL SPECIFICATI0NS
Diagonal size
Active Area
Bezel Opening Area 479.8 (H) x 271.3 (V) mm
Driver Element a-Si TFT active matrix - Pixel Number 1920 x R.G.B. x 1080 pixel Pixel Pitch 0.248(H) x 0.248(V) mm Pixel Arrange ment RGB vertical stripe - Display Colors 16.7 millions color Transmissive Mode Normally White - Surface Treat ment Hard coating (3H), AG (Haze 25%) - Module Power Consumption 12.55 Watt (2)
www.jxlcd.com
Item Specification Unit Note
546.86 (21.53”)
476.64 x 268.11
mm
mm
(1)
1.5 MECHANICAL SPECIFICATIONS
Item Min. Typ. Max. Unit Note
Horizontal(H) 495.1 495.6 496.1 mm
Module Size
I/F connector mounting
Note (1) Please refer to the attached drawings for more information of front and back outline dimensions.
Note (2) Please refer to sec. 3.1 & 3.2 in this document for more information of power consumption
Version 2.1
Vertical(V) 291.7 292.2 292.7 mm
Depth(D) 9.5 10 10.5 mm
Weight -- 1850 1900 g
position
The mounting inclination of the connector makes
the screen center within ±0.5 mm as the horizontal.
5 / 29
(1)
Page 6
Doc No.: 400032833
A
Issued Date: Sep, 24, 2009
Model No.: M215H3-L01
Approval
2. ABSOLUTE MAXIMUM RATINGS
2.1 ABSOLUTE RATINGS OF ENVIRONMENT
Item Symbol
Storage Temperature TST -20 +60 ºC (1)
Operating Ambient T emperature TOP 0 +50 ºC (1), (2)
Shock (Non-Operating) S
Vibration (Non-Operating) V
LCD Cell Life Time L
Relative Humidity (%RH)
100
90
80
- 50 G (3), (5)
NOP
- 1.5 G (4), (5)
NOP
50,000 - Hrs
CELL
Min. Max.
Value
Unit Note
MTBF
based
60
40
20
10
www.jxlcd.com
www.jxlcd.com
Note (1) Temperature and relative humidity range is shown in the figure below.
(a) 90% RH Max. (Ta 40 ºC).≦
(b) Wet-bulb temperature should be 39 ºC Max. (Ta > 40 ºC).
(c) No condensation.
Note (2) The temperature of panel surface should be 0 ºC Min. and 60 ºC Max.
Note (3) 50G,11 ms, half-sine wave, 1 time for ± X, ± Y, ± Z.
-20 40 0 20 -40
Temperature (oC)
Operating Range
Storage Range
60
80
Note (4) 10 ~ 300 Hz, sweep rate 10 min / cycle , 30 min for X,Y,Z axis
Note (5) Upon the Vibration and Shock tests, the fixture used to hold the module must be firm and rigid
enough to prevent the module from twisting or bending by the fixture.
t Room Temperature
Side Mount Fixing Screw
Gap=3~5 mm
Version 2.1
Bracket
LCD Module
Side Mount Fixing Screw
Stage
6 / 29
Page 7
Doc No.: 400032833
2.2 ELECTRICAL ABSOLUTE RATINGS
2.2.1 TFT LCD MODULE
Item Symbol
Power Supply Voltage Vcc -0.3 +6 V (1)
2.2.2 BACK LIGHT UNIT
Item Symbol
LED Forward Current Per
Input Pin
LED Reverse Voltage Per
Input Pin
Power Dissipation Per Input
Pin
Note (1) Permanent damage to the device may occur if maximum values are exceeded. Function operation
should be restricted to the conditions described under Normal Operating Conditions.
IF
VR
PD
Min. Max.
Min. Typ. Max.
0 20 30 mA
--- --- 45 V
--- --- 0.945 W
Value
Va l ue
Unit Note
Unit Note
Issued Date: Sep, 24, 2009
Model No.: M215H3-L01
(1), (2)
Duty=100%
Approval
Note (2) Specified values are for input pin of LED light bar at T a=25±2 ℃ (Refer to 3.2 and 3.3 for further
Information).
www.jxlcd.com
www.jxlcd.com
7 / 29
Version 2.1
Page 8
Doc No.: 400032833
Issued Date: Sep, 24, 2009
Model No.: M215H3-L01
Approval
3. ELECTRICAL CHARACTERISTICS
3.1 TFT LCD MODULE Ta = 25 ± 2 ºC
Parameter Symbol
Min. Typ. Max.
Power Supply V oltage Vcc 4.5 5.0 5.5 V Ripple Voltage VRP - -- 300 mV Vp-p
Power on Rush Current I
- -- 3 A (2)
RUSH
White - 0.51 0.61 A (3)a
Power Supply Current
Black - 1.05 1.26 A (3)b
Vertical Stripe
lcc
- 1.06 1.26 A (3)c
Power consumption(without Backlight Unit) Plcd - 5.3 6.3 W (4)
LVDS differential input voltage Vid 100 - 600 mV
LVDS common input voltage Vic 1 1.2 1.4 V
Note (1) The module should be always operated within above ranges.
Note (2) Power on rush current measurement conditions:
Value
Unit Note
+5.0V
R1
47K
Q1 2SK1475
FUSE
C3
1uF
Vcc
(LCD Module Input)
(High to Low)
(Control Signal)
SW
www.jxlcd.com
+12V
www.jxlcd.com
C1
1uF
VR1
R2
1K
47K
0.01uF
Q2
2SK1470
C2
Vcc rising time is 470µs
Vcc
0.9Vcc
0.1Vcc
GND
470µs
8 / 29
Version 2.1
Page 9
Doc No.: 400032833
≤≤≤
Issued Date: Sep, 24, 2009
Model No.: M215H3-L01
Approval
Note (3) The specified power supply current is under the conditions at Vcc = 5.0 V, Ta = 25 ± 2 ºC, f
Hz, whereas a power dissipation check pattern below is displayed.
a. White Pattern
Active Area
c. Vertical Stripe Pattern
b. Black Pattern
Active Area
R
G
R
B
G
R
B
G
R R
G
B
B
B
B
R
R
R
G
G
G
G
B
B
B
B
R
R
= 60
v
www.jxlcd.com
Note (4)The power consumption is specified at the pattern with the maximum current
3.2 Vcc Power Dip Condition:
www.jxlcd.com
Active Area
Vcc
4.5V
Dip condition:
Td
msTdVVccV 20,5.40.4
4.0V
9 / 29
Version 2.1
Page 10
Doc No.: 400032833
Issued Date: Sep, 24, 2009
Model No.: M215H3-L01
Approval
3.3 BACKLIGHT UNIT (LED matrix is 9S12P) Ta = 25 ± 2 ºC
Parameter Symbol
LED Light Bar Input
Voltage Per Input Pin
LED Light Bar Current
Per Input Pin
LED Life Time
Power Consumption
Note (1) LED light bar input voltage and current are measured by utilizing a true RMS multimeter as
shown below:
V
PIN
I
PIN
L
LED
PBL
Min. Typ. Max.
25.2 29.7 32.4
0 20 30 mA
25000 30000 --- Hrs (3)
--- 7.128 11.664 W
Value
Unit Note
(1),
V
Duty=100%,
=20mA
I
PIN
(1), (2)
Duty=100%
(1)
Duty=100%,
=20mA
I
PIN
Note (2) P
Note (3) The lifetime of LED is defined as the time when LED packages continue to operate under the
= I
BL
conditions at Ta = 25 ±2 ℃ and I= (20)mA (per chip) until the brightness becomes ≦ 50% of its
original value.
Power supply
Function generator
× V
PIN
www.jxlcd.com
www.jxlcd.com
× ( 12 ) input pins , LED light bar circuit is (9)Series, (12)Parallel.
PIN
LED Backlight Module
Series:(9)
Parallel:(12)
CMO Converter
With PWM
Function
V
PIN1, IPIN1
V
PIN(12) , IPIN(12)
10 / 29
Version 2.1
Page 11
3.4 LIGHTBAR Connector Pin Assignment
Connector: 91500-01001-H01 宏致(Aces)
Input Connector pin assignment:
(1) Input connector pin assignment: CN1
Input connector CN1
(vendor)
(Aces)
Pin Function
1
2
3
4
5
6
7
8
9
10
(type)
91500-01001-H01
VLED (29.7V)
VLED (29.7V)
NC
NC
Input voltage Power Supply + (29.7V.typ)
Input voltage Power Supply + (29.7V.typ)
No connect
No connect
LED1 LED1 negative polarity
LED2 LED2 negative polarity
LED3
LED4
LED5
LED3 negative polarity
LED4 negative polarity
LED5 negative polarity
LED6 LED6 negative polarity
Doc No.: 400032833
Issued Date: Sep, 24, 2009
Model No.: M215H3-L01
Approval
Comments
(2) Input connector pin assignment: CN2
Input connector CN2
(vendor)
(Aces)
Pin Function
1
2
3
4
5
6
7
8
9
10
www.jxlcd.com
www.jxlcd.com
(type)
91500-01001-H01
LED7
LED8
LED9
LED10
LED11
LED7 negative polarity
LED8 negative polarity
LED9 negative polarity
LED10 negative polarity
LED11 negative polarity
LED12 LED12 negative polarity
NC
NC
VLED (29.7V)
VLED (29.7V)
No connect
No connect
Input voltage Power Supply + (29.7V.typ)
Input voltage Power Supply + (29.7V.typ)
Comments
11 / 29
Version 2.1
Page 12
4. BLOCK DIAGRAM
4.1 TFT LCD MODULE
RXO0(+/-)
RXO1(+/-)
RXO2(+/-)
RXO3(+/-)
RXOC(+/-)
RXE0(+/-)
RXE1(+/-)
RXE2(+/-)
RXE3(+/-)
Vcc
RXEC(+/-)
GND
INPUT CONNECTOR
www.jxlcd.com
www.jxlcd.com
Pin 1 define
LVDS INPUT /
TIMING CONTROLLER
DC/DC CONVERTER &
REFERENCE VOLTAGE
SCAN DRIVER IC
V_LED
I_LED
BACKLIGHT UNIT
Doc No.: 400032833
Issued Date: Sep, 24, 2009
Model No.: M215H3-L01
Approval
TFT LCD PANEL
(1920x3x1080)
DA TA DRIVER IC
12 / 29
Version 2.1
Page 13
5. INPUT TERMINAL PIN ASSIGNMENT
5.1 TFT LCD MODULE
Pin Name Description
1 RXO0- Negative LVDS differential data input. Channel O0 (odd)
2 RXO0+ Positive LVDS differential data input. Channel O0 (odd)
3 RXO1- Negative LVDS differential data input. Channel O1 (odd)
4 RXO1+ Positive LVDS differential data input. Channel O1 (odd)
5 RXO2- Negative LVDS differential data input. Channel O2 (odd)
6 RXO2+ Positive LVDS differential data input. Channel O2 (odd)
7 GND Ground
8 RXOC- Negative LVDS differential clock input. (odd)
9 RXOC+ Positive LVDS differential clock input. (odd)
10 RXO3- Negative LVDS differential data input. Channel O3(odd)
11 RXO3+ Positive LVDS differential data input. Channel O3 (odd)
12 RXE0- Negative LVDS differential data input. Channel E0 (even)
13 RXE0+ Positive LVDS differential dat a input. Channel E0 (even)
14 GND Ground
15 RXE1- Negative LVDS differential data input. Channel E1 (even)
16 RXE1+ Positive LVDS differential dat a input. Channel E1 (even)
17 GND Ground
18 RXE2- Negative LVDS differential data input. Channel E2 (even)
19 RXE2+ Positive LVDS differential dat a input. Channel E2 (even)
20 RXEC- Negative LVDS differential clock input. (even)
21 RXEC+ Positive LVDS dif f erential clock input. (even)
22 RXE3- Negative LVDS differential data input. Channel E3 (even)
23 RXE3+ Positive LVDS differential dat a input. Channel E3 (even)
24 GND Ground
25 NC Not connection, this pin should be open.
26 NC Not connection, this pin should be open.
27 NC Not connection, this pin should be open.
28 VCC +5.0V power supply
29 VCC +5.0V power supply
30 VCC +5.0V power supply
Note (1) Connector Part No.: 093G30-B2001A(STARCONN) or 187045-30091(P-TWO)
www.jxlcd.com
www.jxlcd.com
Doc No.: 400032833
Issued Date: Sep, 24, 2009
Model No.: M215H3-L01
Approval
Note (2) Mating Wire Cable Connector Part No.: FI-X30H(JAE) or FI-X30HL(JA E )
Note (3) Mating FFC Cable Connector Part No.: 91500-01001-H01(ACES)
Note (4) The first pixel is odd.
Note (5) Input signal of even and odd clock should be the same timing.
13 / 29
Version 2.1
Page 14
5.2 LVDS DATA MAPPING TABLE
L VDS Channel O0
L VDS Channel O1
L VDS Channel O2
L VDS Channel O3
L VDS Channel E0
L VDS Channel E1
L VDS Channel E2
L VDS Channel E3
LVDS output D7 D6 D4 D3 D2 D1 D0
Data order OG0 OR5 OR4 OR3 OR2 OR1 OR0
LVDS output D18 D15 D14 D13 D12 D9 D8
Data order OB1 OB0 OG5 OG4 OG3 OG2 OG1
LVDS output D26 D25 D24 D22 D21 D20 D19
Data order DE NA NA OB5 OB4 OB3 OB2
LVDS output D23 D17 D16 D11 D10 D5 D27
Data order NA OB7 OB6 OG7 OG6 OR7 OR6
LVDS output D7 D6 D4 D3 D2 D1 D0
Data order EG0 ER5 ER4 ER3 ER2 ER1 ER0
LVDS output D18 D15 D14 D13 D12 D9 D8
Data order EB1 EB0 EG5 EG4 EG3 EG2 EG1
LVDS output D26 D25 D24 D22 D21 D20 D19
Data order DE NA NA EB5 EB4 EB3 EB2
LVDS output D23 D17 D16 D11 D10 D5 D27
Data order NA EB7 EB6 EG7 EG6 ER7 ER6
Doc No.: 400032833
Issued Date: Sep, 24, 2009
Model No.: M215H3-L01
Approval
www.jxlcd.com
www.jxlcd.com
14 / 29
Version 2.1
Page 15
Doc No.: 400032833
Issued Date: Sep, 24, 2009
Model No.: M215H3-L01
5.3 COLOR DATA INPUT ASSIGNMENT
The brightness of each primary color (red, green and blue) is based on the 8-bit gray scale data input for
the color. The higher the binary input, the brighter the color. The table below provides the assignment of
color versus data input.
Data Signal
Basic
Colors
Gray
Scale
Of
Red
Color
Black
Red
Green
Blue
Cyan
Magenta
Yellow
White
Red(0) / Dark
Red(1)
Red(2)
:
:
Red(253)
Red(254)
Red(255)
R7 R6 R5 R4 R3 R2 R1 R0 G7 G6 G5 G4 G3 G2 G1 G0 B7 B6 B5 B4 B3 B2 B1 B0
0
0
1
1
0
0
0
0
0
0
1
1
1
1
1
1
0
0
0
0
0
0
:
:
:
:
1
1
1
1
1
1
Red Green Blue
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
1
1
1
1
1
1
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
1
1
1
1
1
1
1
1
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
1
1
0
0
0
0
0
0
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
0
0
0
0
0
0
0
0
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
0
0
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
1
0
0
0
0
0
0
0
0
0
0
0
0
0
0
1
0
0
0
0
0
0
0
0
0
0
0
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
1
1
1
1
0
1
0
0
0
0
0
0
0
0
0
0
1
1
1
1
1
0
0
0
0
0
0
0
0
0
0
0
1
1
1
1
1
1
0
0
0
0
0
0
0
0
0
0
0
0
0
1
1
1
0
1
0
0
0
0
0
0
0
0
0
1
1
1
0
1
0
0
0
:
:
0
0
0
Approval
0
0
0
0
0
0
0
0
0
1
1
1
1
1
1
1
1
1
0
0
0
1
1
1
0
0
0
0
0
0
0
0
0
:
:
:
:
:
:
:
:
0
0
0
0
0
0
0
0
0
0
0
0
1
1
1
0
1
0
0
0
:
:
0
0
0
Green(0) / Dark
Gray
Scale
Of
Green
Gray
Scale
Of
Blue
Note (1) 0: Low Level Volt age, 1: High Level Voltage
Green(1)
Green(2)
:
:
Green(253)
Green(254)
www.jxlcd.com
www.jxlcd.com
Green(255)
Blue(0) / Dark
Blue(1)
Blue(2)
:
:
Blue(253)
Blue(254)
Blue(255)
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
:
:
:
:
:
:
:
:
:
:
:
:
:
:
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
:
:
:
:
:
:
:
:
:
:
:
:
:
:
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
1
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
1
0
0
0
0
0
0
0
0
0
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
0
1
1
1
1
1
1
0
1
0
0
0
0
0
0
0
0
0
1
1
1
1
1
1
1
0
0
0
0
0
0
0
0
0
0
1
1
1
1
1
1
1
1
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
1
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
1
0
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
0
0
0
0
0
0
0
0
0
1
1
1
1
1
1
0
1
0
0
0
0
0
0
0
0
0
1
1
1
1
1
1
1
0
0
0
0
0
0
0
0
0
0
1
1
1
1
1
1
1
1
15 / 29
Version 2.1
Page 16
Doc No.: 400032833
Valid display data (
960
clocks
)
Issued Date: Sep, 24, 2009
Model No.: M215H3-L01
6. INTERFACE TIMING
6.1 INPUT SIGNAL TIMING SPECIFICATIONS
The input signal timing specifications are shown as the following table and timing diagram.
Signal Item Symbol Min. Typ. Max. Unit Note
Frequency Fc 58.54 74.25 97.98 MHz Period Tc - 13.47 - ns
Input cycle to
cycle jitter
Spread spectrum
LVDS Clock
LVDS Data
Vertical Active Display Term
Horizontal Active Display Term
Note： Because this module is operated by DE only mode, Hsync and Vsync input signals should be
modulation range
Spread spectrum
modulation
frequency
High Time Tch - 4/7 - Tc Low Time Tcl - 3/7 - T c Setup Time Tlvs 600 - - ps
Hold Time Tlvh 600 - - ps
Frame Rate Fr 50 60 75 Hz Tv=Tvd+Tvb
Total Tv 1115 1125 1136 Th Display Tvd 1080 1080 1080 Th Blank Tvb Tv-Tvd 45 Tv-Tvd Th Total Th 1050 1100 1150 Tc Th=Thd+Thb
Display Thd 960 960 960 Tc Blank Thb Th-Thd 140 Th-Thd Tc -
T
clkin_mod
F
F
SSM
rcl
－ －
F
-2%
clkin
200 KHz
－
200 ps (1)
F
+2% MHz
clkin
Approval
(2)
(3)
set to low logic level or ground. Otherwise, this module would operate abnormally.
INPUT SIGNAL TIMING DIAGRAM
www.jxlcd.com
www.jxlcd.com
Version 2.1
16 / 29
Page 17
Note (1) The input clock cycle-to-cycle jitter is defined as below figures. Trcl = I T1 – TI
Note (2) The SSCG (Spread spectrum clock generator) is defined as below figures.
Doc No.: 400032833
Issued Date: Sep, 24, 2009
Model No.: M215H3-L01
Approval
Valid display data (960 clocks)
www.jxlcd.com
www.jxlcd.com
Note (3) The LVDS timing diagram and setup/hold time is defined and showing as the following figures.
LVDS RECEIVER INTERFACE TIMING DIAGRAM
RXCLK+/-
Tc
RXn+/-
Version 2.1
Tlvs
Tlvh
1T
14
3T
14
5T
14
7T
14
17 / 29
9T
14
11T
14
13T
14
Page 18
Doc No.: 400032833
Issued Date: Sep, 24, 2009
Model No.: M215H3-L01
Approval
6.2 POWER ON/OFF SEQUENCE
To prevent a latch-up or DC operation of LCD module, the power on/off sequence should be as the
diagram below.
Timing Specifications:
0.5< t1 ≦ 10 msec
0 < t2 ≦ 50 msec
0 < t3 ≦ 50 msec
t4 ≧ 500 msec
t5 ≧ 450 msec
www.jxlcd.com
www.jxlcd.com
t6 ≧ 90 msec
5 t7≦ 100 msec≦
Note.
(1) The supply voltage of the external system for the module input should be the same as the definition of Vcc.
(2)
(3) In case of Vcc = off level, please keep the level of input signals on the low or keep a high impedance.
When the backlight turns on before the LCD operation of the LCD turns off, the display may momentarily become abnormal
screen.
(4) t4 should be measured after the module has been fully discharged between power of and on period.
(5) Interface signal shall not be kept at high impedance when the power is on.
CMO won’t take any responsibility for the products which are damaged by the customers not following the Power
(6)
Sequence.
(7)
There might be slight electronic noise when LCD is turned off (even backlight unit is also off). To avoid this symptom,
we suggest "Vcc falling timing" to follow "t7 spec".
18 / 29
Version 2.1
Page 19
Doc No.: 400032833
Issued Date: Sep, 24, 2009
Model No.: M215H3-L01
7. OPTICAL CHARACTERISTICS
7.1 TEST CONDITIONS
Item Symbol Value Unit
Ambient Temperature Ta
Ambient Humidity Ha
Supply Volt age VCC 5 V
Input Signal According to typical value in "3. ELECTRICAL CHARACTERISTICS"
LED Light Bar Input Current
Per Input Pin
PWM Duty Ratio D 100 %
LED Light Bar Test Converter
I
20 ± 0.6 mADC
PIN
7.2 OPTICAL SPECIFICATIONS
The relative measurement methods of optical characteristics are shown in 7.2. The following items should
be measured under the test conditions described in 7.1 and stable environment shown in Note (5).
Item Symbol Condition Min. Typ. Max. Unit Note
Red
Color
Chromaticity
(CIE 1931)
Center Luminance of White
(Center of Screen)
www.jxlcd.com
www.jxlcd.com
Contrast Ratio CR
Response Time
White Variation
Green
Blue
White
Rx
Ry
Gx
Gy
Bx
By
Wx
Wy
L
C
TR --- 1.3 2.2 ms
T
F
δW
θx=0°, θY =0°
CS-2000T
=0°, θY =0°
θ
x
=0°, θY =0°
θ
x
USB2000
25±2
50±10
CMO 27-D041745
0.636
0.348
0.327
Typ –
0.03
200 250 --- cd/m2(4), (5)
700 1000 --- --- (2), (6)
--- 3.7 5.8 ms
--- ---- 1.42 - (5), (6)
0.611
0.154
0.059
0.313
0.329
%RH
Typ +
0.03
Approval
o
C
--- (1), (5)
(3)
75 85 --75 85 --70 80 --70 80 ---
80 89 --80
75
75
89
85
85
---
---
---
Deg. (1), (5)
Deg. (1), (5)
Viewing Angle
Viewing Angle
Horizontal
Vertical
Horizontal
Vertical
θx+
θ
x
θY+
θ
Y
θx+
θ
x
θY+
θ
Y
-
-
-
-
CR≧10
USB2000
CR≧5
USB2000
19 / 29
Version 2.1
Page 20
Note (1) Definition of Viewing Angle (θx, θy):
Doc No.: 400032833
Issued Date: Sep, 24, 2009
Model No.: M215H3-L01
Approval
Note (2) Definition of Contrast Ratio (CR):
The contrast ratio can be calculated by the following expression.
Contrast Ratio (CR) = L255 / L0
L255: Luminance of gray level 255
L 0: Luminance of gray level 0
CR = CR (5)
CR (X) is corresponding to the Contrast Ratio of the point X at Figure in Note (6).
www.jxlcd.com
Note (3) Definition of Response Time (T
100%
Optical
Response
www.jxlcd.com
Gray Level 255
90%
10%
0%
T
66.67ms
, TF):
R
Gray Level 255
Gray Level 0
Time
R
TF
66.67ms
20 / 29
Version 2.1
Page 21
Note (4) Definition of Luminance of White (LC):
Measure the luminance of gray level 255 at center point
L
= L (5)
C
L (x) is corresponding to the luminance of the point X at Figure in Note (6).
Note (5) Measurement Setup:
The LCD module should be stabilized at given temperature for (30 minutes) to avoid abrupt
temperature change during measuring. In order to stabilize the luminance, the measurement
should be executed after lighting Backlight for (30 minutes) in a wi ndless room.
LCD Module
LCD Panel
USB2000
Doc No.: 400032833
Issued Date: Sep, 24, 2009
Model No.: M215H3-L01
Approval
CS-2000
Center of the Screen
Light Shield Room
(Ambient Luminance < 2 lux)
www.jxlcd.com
www.jxlcd.com
Note (6) Definition of White Variation (δW):
Measure the luminance of gray level 255 at 9 points
δW = Maximu m [L (1) ~ L (9)] / Minimum [L (1) ~ L (9)]
W/10
D/10 D/2
1 3
Horizontal Line
D
D/10
2
Version 2.1
Vertical Line
W
W/2
W/10
4
7
5
8
Active Area
21 / 29
6
9
X
: Test Point
X=1 to 9
Page 22
8. PACKAGING
8.1 PACKING SPECIFICATIONS
(1) 12 LCD modules / 1 Box
(2) Box dimensions: 563(L) X 390 (W) X 375 (H) mm
(3) Weight: 24.96 Kg (12 modules per box)
8.2 PACKING METHOD
(1) Carton Packing should have no failure in the following reliability test items.
Test Item Test Conditions Note
ISTA STANDARD
Random, Frequency Range: 1 – 200 Hz
Vibration
Dropping Test 1 Conner, 3 Edge, 6 Face, 45.7cm (ISTA S tandard) Non Operation
Top & Bottom: 30 minutes (+Z), 10 min (-Z),
Right & Left: 10 minutes (X)
Back & Forth 10 minutes (Y)
Doc No.: 400032833
Issued Date: Sep, 24, 2009
Model No.: M215H3-L01
Approval
Non Operation
www.jxlcd.com
www.jxlcd.com
Figure. 8-1 Packing method
22 / 29
Version 2.1
Page 23
For ocean shipping
Corner Protector
(L1000mm,t=3mm)
Doc No.: 400032833
Issued Date: Sep, 24, 2009
Model No.: M215H3-L01
Approval
Sea / Land Transportation
(40ft Container)
PE Sheet
For air transport
Film
Corner Protector
(L1130mm,t=5mm)
Carton Label
Pallet
(L1150*W1190*H143mm)
Corner Protector
(L625mm,t=5mm)
PP Belt
Figure. 8-2 Packing method
www.jxlcd.com
www.jxlcd.com
Figure. 8-3 Packing method
23 / 29
Version 2.1
Page 24
Doc No.: 400032833
Issued Date: Sep, 24, 2009
Model No.: M215H3-L01
Approval
9. DEFINITION OF LABELS
9.1 CMO MODULE LABEL
The barcode nameplate is pasted on each module as illustration, and its definitions are as following explanation.
M215H3-L01
CML5H31XXXXXLXXLYMDNNNN
(a) Model Name: M215H3-L01
(b) Revision: Rev. XX, for example: A0, A1… B1, B2… or C1, C2…etc.
(c) CMO barcode definition:
Serial ID: XX
Code Meaning Description
XX CMO internal use XX Revision Cover all the change
X CMO internal use -
XX CMO internal use -
YMD Year, month, day
L Product line # Line 1=1, Line 2=2, Line 3=3, …
NNNN Serial number Manufacturing sequence of product
(d) Customer’s barcode definition:
-XX-X-XX-YMD-L-NNNN
Year: 2001=1, 2002=2, 2003=3, 2004=4…
Month: 1~12=1, 2, 3, ~, 9, A, B, C
Day: 1~31=1, 2, 3, ~, 9, A, B, C, ~, W, X, Y, exclude I, O, and U.
(Fab ID)
Serial ID: CM
Code Meaning Description
CM Supplier code CMO=CM
L5H31 Model number M215H3-L01=L5H31
X
X Source driver IC code
X Gate driver IC code
XX Cell location Tainan, Taiwan=TN
L Cell line # 1~Z
XX Module location Tainan, Taiwan=TN ; NB, China=NP ; NH, China=NH
L Module line # 1~Z
YMD Year, month, day
NNNN Serial number Manufacturing sequence of product
(e) UL Factory ID:
Region Factory ID
TWCMO GEMN
NBCMO LEOO
NBCME CANO
NHCMO CAPG
www.jxlcd.com
www.jxlcd.com
Revision code ZBD, C1=A, C2=B, ….
-L5H31-X-X-X-XX-L-XX-L-YMD-NNNN
Non ZBD, C1=1, C2=2, ….
Century=1, CLL=2, Demos=3, Epson=4, Fujitsu=5, Himax=6,
Hitachi=7, Hynix=8, LDI=9, Matsushita=A, NEC=B, Novatec=C,
OKI=D, Philips=E, Renasas=F, Samsung=G, Sanyo=H, Sharp=I,
TI=J, Topro=K, Toshiba=L, Windbond=M
Year: 2001=1, 2002=2, 2003=3, 2004=4…
Month: 1~12=1, 2, 3, ~, 9, A, B, C
Day: 1~31=1, 2, 3, ~, 9, A, B, C, ~, T, U, V
24 / 29
Version 2.1
Page 25
10.0 Reliability Test
Environment test conditions are listed as following table.
Items Required Condition Note
Temperature Humidity Bias (THB) Ta= 50℃ , 80%RH, 240hours
High Temperature Operation (HTO) Ta= 50℃ , 50%RH , 240hours
Low Temperature Operation (LTO) Ta= 0℃ , 240hours
High Temperature Storage (HTS) Ta= 60℃ , 240hours
Low Temperature Storage (LTS) Ta= -20℃ , 240hours
Acceleration: 1.5 Grms
Wave: Half-sine
Vibration Test
(Non-operation)
Shock Test
(Non-operation)
Thermal Shock Test (TST) -20℃/30min , 60℃ / 30min , 100 cycles
Frequency: 10 - 300 Hz
Sweep: 30 Minutes each Axis (X, Y, Z)
Acceleration: 50 G
Wave: Half-sine
Active Time: 11 ms
Direction : ± X, ± Y, ± Z.(one time for each Axis)
Issued Date: Sep, 24, 2009
Model No.: M215H3-L01
Doc No.: 400032833
Approval
On/Off Test 25℃ ,On/10sec , Off /10sec , 30,000 cycles
Contact Discharge: ± 8KV, 150pF(330Ω)
ESD (Electro Static Discharge)
Altitude Test
www.jxlcd.com
www.jxlcd.com
Air Discharge: ± 15KV, 150pF(330Ω)
Operation:10,000 ft / 24hours
Non-Operation:30,000 ft / 24hours
25 / 29
Version 2.1
Page 26
Doc No.: 400032833
Issued Date: Sep, 24, 2009
Model No.: M215H3-L01
Approval
11. PRECAUTIONS
1 1.1 ASSEMBL Y AND HANDLING PRECAUTIONS
(1) Do not apply rough force such as bending or twisting to the module during assembly.
(2) To assemble or install module into user’s system can be only in clean working areas. The dust and oil
may cause electrical short or worsen the polarizer.
(3) It’s not permitted to have pressure or impulse on the module because the LCD panel and Backlight
will be damaged.
(4) Always follow the correct power sequence when LCD module is connecting and operating. This can
prevent damage to the CMOS LSI chips during latch-up.
(5) Do not pull the I/F connector in or out while the module is operating.
(6) Do not disassemble the module.
(7) Use a soft dry cloth without chemicals for cleaning, because the surface of polarizer is very soft and
easily scratched.
(8) It is dangerous that moisture come into or contacted the LCD module, because moisture may damage
LCD module when it is operating.
(9) High temperature or humidity may reduce the performance of module. Please store LCD module
within the specified storage conditions.
(10) When ambient temperature is lower than 10ºC may reduce the display quality. For example, the
response time will become slowly.
11.2 SAFETY PRECAUTIONS
(1) If the liquid crystal material leaks from the panel, it should be kept away from the eyes or mouth. In
www.jxlcd.com
case of contact with hands, skin or clothes, it has to be washe d away thoroughly with soap.
(2) After the module’s end of life, it is not harmful in case of normal operation and storage.
11.3 SAFETY STANDARDS
The LCD module should be certified with safety regulations as follows:
(1) UL60950-1 or updated standard.
(2) IEC60950-1 or updated standard.
11.4. Storage
(1) Do not leave the module in high temperature, and high humidity for a long time.
It is highly recommended to store the module with temperature from 0℃ to 35℃
www.jxlcd.com
And relative humidity of less than 70%
(2) Do not store the TFT – LCD module in direct sunlight
(3) The module should be stored in dark place. It is prohibited to apply sunlight or fluorescent light in storing
26 / 29
Version 2.1
Page 27
Doc No.: 400032833
Issued Date: Sep, 24, 2009
Model No.: M215H3-L01
Approval
11.5. Operation condition guide
(1) The LCD product should be operated under normal condition.
Normal condition is defined as below :
Temperature : 20±15℃
Humidity: 65±20%
Display pattern : continually changing pattern(Not stationary)
(2) If the product will be used in extreme conditions such as high temperature , high humidity , high altitude ,
display pattern or operation time etc…It is strongly recommended to cont act CMO for application
engineering advice . Otherwise , Its reliability and function may not be guaranteed.
11.6 OTHER
When fixed patterns are displayed for a long time, remnant image is likely to occur.
www.jxlcd.com
www.jxlcd.com
27 / 29
Version 2.1
Page 28
www.jxlcd.com
www.jxlcd.com
Page 29
www.jxlcd.com
www.jxlcd.com
Loading...