Datasheet M190E5-P01 Datasheet (Chi Mei Optoelectronics)

A

Doc No.: 24058285

Issued Date: Nov. 28, 2006

Model No.: M190E5-P01

Approval

TFT LCD Approval Specification

MODEL NO.: M190E5-P01

Customer:

pproved by:

Note:

www.jxlcd.com

記錄工作審核角色投票

2006-12-02 13:44:54 CST

2006-11-28 20:27:32 CST

Approve by Dept. Mgr.(QA RA)

Approve by Director

tomy_chen(陳永一 /52720/54140/43150)

teren_lin(林添仁 /56910/36064)

Department Manager(QA RA)

Director Accept

Accept

1 / 25

Version 2.1

- CONTENTS -

REVISION HISTORY

1. GENERAL DESCRIPTION

1.1 OVERVIEW

1.2 FEATURES

1.3 APPLICATION

1.4 GENERAL SPECIFICATIONS

1.5 MECHANICAL SPECIFICATIONS

2. ABSOLUTE MAXIMUM RATINGS

2.1 ABSOLUTE RATINGS OF ENVIRONMENT (BASED ON CMO MODULE)

2.2 ABSOLUTE RATINGS OF ENVIRONMENT (OPEN CELL)

2.3 ELECTRICAL ABSOLUTE RATINGS (OPEN CELL)

3. ELECTRICAL CHARACTERISTICS

3.1 TFT LCD OPEN CELL

4. BLOCK DIAGRAM

4.1 TFT LCD OPEN CELL

5. INPUT TERMINAL PIN ASSIGNMENT

5.1 TFT LCD MODULE

5.2 TIMING DIAGRAM OF LVDS INPUT SIGNAL

5.3 COLOR DATA INPUT ASSIGNMENT

6. INTERFACE TIMING

6.1 INPUT SIGNAL TIMING SPECIFICA TIONS

6.2 POWER ON/OFF SEQUENCE

7. OPTICAL CHARACTERISTICS

7.1 TEST CONDITIONS

7.2 OPTICAL SPECIFICATIONS

7.3 FLICKER ADJUSTMENT

8. PACKAGING

8.1 PACKING SPECIFICATIONS

8.2 PACKING METHOD

9. DEFINITION OF LABELS

9.1 OPEN CELL LABEL

9.2 CARTON LABEL

10. PRECAUTIONS

10.1 ASSEMBLY AND HANDLING PRECAUTIONS

10.2 SAFETY PRECAUTIONS

11. MECHANICAL DRAWING

www.jxlcd.com

------------------------------------------------------- 3

------------------------------------------------------- 4

------------------------------------------------------- 5

------------------------------------------------------- 7

------------------------------------------------------- 9

------------------------------------------------------- 10

------------------------------------------------------- 13

------------------------------------------------------- 15

------------------------------------------------------- 20

------------------------------------------------------- 22

------------------------------------------------------- 24

------------------------------------------------------- 25

Doc No.: 24058285

Issued Date: Nov. 28, 2006

Model No.: M190E5-P01

Approval

2 / 25

Version 2.1

Doc No.: 24058285

Issued Date: Nov. 28, 2006

Model No.: M190E5-P01

Approval

REVISION HISTORY

Version Date Section Description

M190E5-P01 Preliminary Specifications was first issued。

Ver. 1.0 Ver. 2.0

Ver. 2.1

Aug., 04 ’05 Nov., 10 ‘05

Nov, 28 ‘06

-

1.2

3.1

7.2

9.1

Modify from “High color saturation (EBU like Specifications)” to “High color saturation” Modify Power Supply Current from “f Modify Color Chromaticity Wx from 0.326 to 0.316 Modify Center Transmittance min. from 5.4 to 5.2 Modify Center Transmitt ance typ. from 6.0 to 5.8 Modify the label from Panel label to Open cell label. Modified CMO OPEN CELL LABEL.

= 75Hz, Vcc=4.5V” to “Vertical stripe”

V

www.jxlcd.com

3 / 25

Version 2.1

Doc No.: 24058285

Issued Date: Nov. 28, 2006

Model No.: M190E5-P01

1. GENERAL DESCRIPTION

1.1 OVERVIEW

The M190E5-P01 is a 19-inch TFT LCD cell with driver ICs and a 30-pin-and-2ch-LVDS circuit board. The product supports 1280 x 1024 SXGA mode and can display up to 16.2M colors. The backlight unit is not built in.

1.2 FEATURES

- Wide viewing angle

- High contrast ratio

- Fast response time

- High color saturation

- SXGA (1280 x 1024 pixels) resolution

Approval

- DE (Data Enable) only mode

- LVDS (Low Voltage Differential Signaling) interface

- RoHS Compliance

1.3 APPLICA TION

- TFT LCD Monitor

- TFT LCD TV

www.jxlcd.com

1.4 GENERAL SPECIFICATI0NS

Diagonal Size 19.0 inch Active Area 376.32 (H) x 301.056 (V) mm (1) Driver Element a-si TFT active matrix - Pixel Number 1280 x R.G.B. x 1024 pixel Pixel Pitch 0.294 (H) x 0.294 (V) mm Pixel Arrange ment RGB vertical stripe - Display Colors 16.2M color Transmissive Mode Normally White - Surface Treatment Hard coating (3H), Anti-glare (Haze 25) - -

www.jxlcd.com

Item Specification Unit Note

1.5 MECHANICAL SPECIFICATIONS

Item Min. Typ. Max. Unit Note Weight - 515 540 g I/F connector mounting position

Note (1) Please refer to the attached drawings for more information of front and back outline dimensions. (2) Connector mounting position

Version 2.1

The mounting inclination of the connector makes the screen center within ±0.5mm as the horizontal.

+/- 0.5mm

4 / 25

(2)

Doc No.: 24058285

Issued Date: Nov. 28, 2006

Model No.: M190E5-P01

Approval

2. ABSOLUTE MAXIMUM RATINGS

2.1 ABSOLUTE RATINGS OF ENVIRONMENT (BASED ON CMO MODULE M190E5-L0A)

Item Symbol

Storage Temperature TST -20 +60 ºC (1) Operating Ambient T emperature TOP 0 +50 ºC (1), (2)

Note (1) Temperature and relative humidity range is shown in the figure below. (a) 90 %RH Max. (Ta ≦ 40 ºC). (b) Wet-bulb temperature should be 39 ºC Max. (Ta > 40 ºC). (c) No condensation. Note (2) The temperature of panel display surface area should be 0 ºC Min. and 60 ºC Max.

Relative Humidity (%RH)

Min. Max.

Value

Unit Note

www.jxlcd.com

100

80

60

40

20

90

10

Operating Range

Storage Range

8060 -20 400 20-40

Temperature (ºC)

5 / 25

Version 2.1

Doc No.: 24058285

Issued Date: Nov. 28, 2006

Model No.: M190E5-P01

Approval

2.2 ABSOLUTE RATINGS OF ENVIRONMENT (OPEN CELL) High temperature or humidity may reduce the performance of panel. Please store LCD panel within the specified storage conditions.

Storage Condition: With packing. Storage temperature range: 25±5 ºC. Storage humidity range: 50±10%RH. Shelf life: 30days

2.3 ELECTRICAL ABSOLUTE RATINGS (OPEN CELL)

Item Symbol

Power Supply V oltage VCC -0.3 +6.0 V Logic Input Voltage VIN -0.3 4.3 V

Note (1) Permanent damage to the device may occur if maximum values are exceeded. Function

operation should be restricted to the conditions described under Normal Op erating Conditions.

www.jxlcd.com

Value

Min Max

Unit Note

(1)

6 / 25

Version 2.1

Doc No.: 24058285

Issued Date: Nov. 28, 2006

Model No.: M190E5-P01

Approval

3. ELECTRICAL CHARACTERISTICS

3.1 TFT LCD OPEN CELL Ta = 25 ± 2 º C

Parameter Symbol

Min. Typ. Max. Power Supply V oltage Vcc 4.5 5.0 5.5 V Ripple Voltage VRP - - 100 mV Rush Current I

- 2 3 A (2)

RUSH

White - 0.5 0.8 A (3)a

Power Supply Current

Black - 1.3 1.5 A (3)b Vertical stripe

lCC

- 0.9 1.3 A (3)c LVDS differential input voltage Vid 100 - 600 mV LVDS common input voltage Vic - 1.2 - V

Note (1) The module is recommended to operate within specification ranges listed above for normal

function.

Note (2) Measurement Conditions:

Value

Unit Note

+5.0V

R1

47K

Q1 2SK1475

FUSE

C3 1uF

Vcc

(LCD Module Input)

(High to Low)

(Control Signal)

SW

www.jxlcd.com

+12V

C1

1uF

VR1

R2

1K

47K

0.01uF

Q2

2SK1470

C2

Vcc rising time is 470µs

+5.0V

0.9Vcc

0.1Vcc

GND

470µs

7 / 25

Version 2.1

Doc No.: 24058285

Issued Date: Nov. 28, 2006

Model No.: M190E5-P01

Approval

Note (3) The specified power supply current is under the conditions at Vcc = 5.0 V, Ta = 25 ± 2 ºC, fv = 60

Hz, whereas a power dissipation check pattern below is displayed. a. White Pattern

Active Area

c. Vertical Stripe Pattern

www.jxlcd.com

Active Area

b. Black Pattern

Active Area

R

G

R

B

G

R

B

G

R R

G

B B

R R

R

G G

B B

R

8 / 25

Version 2.1

4. BLOCK DIAGRAM

4.1 TFT LCD OPEN CELL

Doc No.: 24058285

Issued Date: Nov. 28, 2006

Model No.: M190E5-P01

Approval

RXO0(+/-) RXO1(+/-) RXO2(+/-) RXO3(+/-) RXOC(+/-) RXE0(+/-) RXE1(+/-) RXE2(+/-) RXE3(+/-) RXEC(+/-)

Vcc GND

(JAE-FI-XB30SRL-HF11)

INPUT CONNECTOR

LVDS INPUT /

TIMING CONTROLLER

DC/DC CONVERTER &

REFERENCE VOLTAGE

SCAN DRIVER IC

TFT LCD PANEL

(1280x3x1024)

DA TA DRIVER IC

www.jxlcd.com

9 / 25

Version 2.1

5. INPUT TERMINAL PIN ASSIGNMENT

5.1 TFT LCD MODULE

Pin Name Description

1 RXO0- Negative LVDS diff erential data input. Channel O0 (odd) 2 RXO0+ Positive LVDS dif f erential data input. Channel O0 (odd) 3 RXO1- Negative LVDS diff erential data input. Channel O1 (odd) 4 RXO1+ Positive LVDS dif f erential data input. Channel O1 (odd) 5 RXO2- Negative LVDS diff erential data input. Channel O2 (odd) 6 RXO2+ Positive LVDS dif f erential data input. Channel O2 (odd) 7 GND Ground 8 RXOC- Negative LVDS differential clock input. (odd)

9 RXOC+ Positive LVDS differential clock input. (odd) 10 RXO3- Negative LVDS dif f erential data input. Channel O3(odd) 11 RXO3+ Positive LVDS differential data input. Channel O3 (odd) 12 RXE0- Negative LVDS differential data input. Channel E0 (even) 13 RXE0+ Positive LVDS differential data input. Channel E0 (even) 14 GND Ground 15 RXE1- Negative LVDS differential data input. Channel E1 (even) 16 RXE1+ Positive LVDS differential data input. Channel E1 (even) 17 GND Ground 18 RXE2- Negative LVDS differential data input. Channel E2 (even) 19 RXE2+ Positive LVDS differential data input. Channel E2 (even) 20 RXEC- Negative LVDS differential clock input. (even) 21 RXEC+ Positive LVDS differential clock input. (even) 22 RXE3- Negative LVDS differential data input. Channel E3 (even) 23 RXE3+ Positive LVDS differential data input. Channel E3 (even) 24 GND Ground

25 TEST 26 NC Not connection.

27 NC Not connection. 28 VCC +5.0V power supply 29 VCC +5.0V power supply 30 VCC +5.0V power supply

Note (1) Connector Part No.: JAE-FI-XB30SRL-HF1 1 or equivalent.

www.jxlcd.com

Low: Normal mode High: Flicker adjustment

Doc No.: 24058285

Issued Date: Nov. 28, 2006

Model No.: M190E5-P01

Approval

Note (2) The first pixel is odd. Note (3) Input signal of even and odd clock should be the same timing.

10 / 25

Version 2.1

5.2 TIMING DIAGRAM OF LVDS INPUT SIGNAL

L VDS Channel E0

L VDS Channel E1

L VDS Channel E2

L VDS Channel E3

L VDS Channel O0

L VDS Channel O1

L VDS Channel O2

L VDS Channel O3

LVDS output D7 D6 D4 D3 D2 D1 D0 Data order EG0 ER5 ER4 ER3 ER2 ER1 ER0 LVDS output D18 D15 D14 D13 D12 D9 D8 Data order EB1 EB0 EG5 EG4 EG3 EG2 EG1 LVDS output D26 D25 D24 D22 D21 D20 D19 Data order DE NA NA EB5 EB4 EB3 EB2 LVDS output D23 D17 D16 D11 D10 D5 D27 Data order NA EB7 EB6 EG7 EG6 ER7 ER6 LVDS output D7 D6 D4 D3 D2 D1 D0 Data order OG0 OR5 OR4 OR3 OR2 OR1 OR0 LVDS output D18 D15 D14 D13 D12 D9 D8 Data order OB1 OB0 OG5 OG4 OG3 OG2 OG1 LVDS output D26 D25 D24 D22 D21 D20 D19 Data order DE NA NA OB5 OB4 OB3 OB2 LVDS output D23 D17 D16 D11 D10 D5 D27 Data order NA OB7 OB6 OG7 OG6 OR7 OR6

Doc No.: 24058285

Issued Date: Nov. 28, 2006

Model No.: M190E5-P01

Approval

www.jxlcd.com

11 / 25

Version 2.1

Doc No.: 24058285

Issued Date: Nov. 28, 2006

Model No.: M190E5-P01

Approval

5.3 COLOR DATA INPUT ASSIGNMENT

The brightness of each primary color (red, green and blue) is based on the 8-bit gray scale data input for the color. The higher the binary input, the brighter the color. The table below provides the assignment of color versus data input.

Data Signal

Color

R7 R6 R5 R4 R3 R2 R1 R0 G7 G6 G5 G4 G3 G2 G1 G0 B7 B6 B5 B4 B3 B2 B1 B0

Black Red

Green Basic Colors

Gray Scale Of Red

Gray Scale Of Green

Gray Scale Of Blue

Note (1) 0: Low Level Voltage, 1: High Level Voltage

Blue

Cyan

Magenta

Yellow

White

Red(0) / Dark

Red(1)

Red(2)

:

: Red(253) Red(254) Red(255)

Green(0) / Dark Green(1) Green(2)

:

: Green(253)

www.jxlcd.com

Green(254) Green(255) Blue(0) / Dark Blue(1) Blue(2)

:

: Blue(253) Blue(254) Blue(255)

0

1

0

1

0

:

1

0

:

0

:

0

Red Green Blue

0

1

0

1

0

1

0

1

0

1

0

1

0

1

0

1

0

:

1

0

1

0

1

0

1

0

1

0

1

0

:

0

1

0

1

0

1

0

1

0

:

0

1

0

1

0

1

0

1

0

1

0

:

0

:

0

1

0

1

0

:

1

0

1

0

1

12 / 25

Version 2.1

Doc No.: 24058285

Issued Date: Nov. 28, 2006

Model No.: M190E5-P01

6. INTERFACE TIMING

6.1 INPUT SIGNAL TIMING SPECIFICATIONS

The input signal timing specifications are shown as the following table and timing diagram.

Signal Item Symbol Min. Typ. Max. Unit Note

Frequency Fc - 54 67.5 MHz -

LVDS Clock

LVDS Data

Vertical Active Display Term

Horizontal Active Display Term

Note：(1) Because this module is operated by DE only mode, Hsync and Vsync input signals should be

Period Tc - 18.5 - ns High Time Tch - 4/7 - Tc Low Time Tcl - 3/7 - Tc Setup Time Tlvs 600 - - ps Hold Time Tlvh 600 - - ps Frame Rate Fr 56 60 75 Hz Tv=Tvd+Tvb Total Tv 1034 1066 1274 Th Display Tvd 1024 1024 1024 Th Blank Tvb Tv-Tvd 42 Tv-Tvd Th Total Th 740 844 960 Tc Th=Thd+Thb Display Thd 640 640 640 Tc Blank Thb Th-Thd 204 Th-Thd Tc -

Approval

set to low logic level or ground. Otherwise, this module would operate abnormally.

INPUT SIGNAL TIMING DIAGRAM

www.jxlcd.com

13 / 25

Version 2.1

Doc No.: 24058285

Issued Date: Nov. 28, 2006

Model No.: M190E5-P01

Approval

6.2 POWER ON/OFF SEQUENCE

To prevent a latch-up or DC operation of LCD module, the power on/off sequence should follow the conditions shown in the following diagram.

0.9 V

Power Supply

CC

0.9 V

CC

V

0.5ms≤T1≤10ms

2≤50ms

0≤T

3≤50ms

0≤T 500ms≤T

Backlight (Recommended)

450ms≤T5

90ms≤T6

www.jxlcd.com

CC

4

Signals

0V

0.1V

CC

Power On

1

T

2

T

3

VALID

Power Off

50%

5

T

50%

T

6

Power ON/OFF Sequence

0.1VDD

4

T

Note.

(1) The supply voltage of the external system for the module input should be the same as the definition of Vcc.

(2) Please apply the lamp voltage within the LCD operation range. When the backlight turns on before the LCD

operation of the LCD turns off, the display may, instantly, function abnormally.

(3) In case of

VCC = off level, please keep the level of input signals on the low or keep a high impedance.

(4) T4 should be measured after the module has been fully discharged between power on/off periods. (5) I

nterface signal shall not be kept at high impedance when the power is on.

14 / 25

Version 2.1

Doc No.: 24058285

Issued Date: Nov. 28, 2006

Model No.: M190E5-P01

Approval

7. OPTICAL CHARACTERISTICS

7.1 TEST CONDITIONS

Item Symbol Value Unit Ambient Temperature Ta Ambient Humidity Ha Supply Volt age VCC 5.0 V Input Signal According to typical value in "3. ELECTRICAL CHARACTERISTICS" Inverter Current IL 7 mA Inverter Driving Frequency FL 61 KHz

25±2

50±10

7.2 OPTICAL SPECIFICATIONS

The relative measurement methods of optical characteristics are shown as below. The following items

should be measured under the test conditions described in 7.1 and stable environment shown in Note (6).

Item Symbol Condition Min. Typ. Max. Unit Note

Red

Color Chromaticity

Center Transmittance T% Contrast Ratio CR

Response Time

Transmittance uniformity

Viewing Angle

www.jxlcd.com

Green

Blue

White

Horizontal

Vertical

Rcx 0.649 Rcy

Gcx 0.278 Gcy

Bcx 0.133 Bcy

Wcx 0.316 Wcy

TR T

δT%

θ

Standard light source “C”

F

+

x

-

x

+

Y

-

Y

=0°, θY =0°

θ

x

CS-1000T

θ

=0°, θY =0°

x

CS-1000T, CMO BLU

=0°, θY =0°

θ

x

θ

=0°, θY =0°

x

BM-5A

CR≥10 BM-5A

Typ -

0.03

350 500 - - (1), (3)

0.342

0.589

0.108

0.358

5.2 5.8 % (1), (8)

-

- 1.25 1.4 - (1), (7)

65 75 65 60 50

75 70 60 -

Typ +

0.03

2 7 6 11

o

C

%RH

-

ms ms

Deg.

(0),(6)

(4)

(1), (2)

(6)

15 / 25

Version 2.1

7.3 Flicker Adjustment

(1) Adjustment Pattern: One-dot checker pattern as follows.

Doc No.: 24058285

Issued Date: Nov. 28, 2006

Model No.: M190E5-P01

Approval

(2) Adjustment Method:

When adjusting Flicker, the pin 25 of input connector must be tide to VDD (3.3V). Flicker should be

adjusted by turning the volume for flicker adjustment by the ceramic driver. It is adjusted to the point with

www.jxlcd.com

least flickering of the whole screen. After making it surely overrun at once, it should be adjusted to the optimum point.

www.jxlcd.com

16 / 25

Version 2.1

Doc No.: 24058285

Issued Date: Nov. 28, 2006

Model No.: M190E5-P01

Approval

Note (0) Light source is the standard light source “C” which is defined by CIE and driving voltages are based on suitable gamma voltages. The calculating method is as following：

1. Measure Module’s and BLU’s spectrums. White is without signal input and R, G, B are with signal input. BLU(for M190E5-L0A) is supplied by CMO.

2. Calculate cell’s spectrum.

3. Calculate cell’s chromaticity by using the spectrum of standard light source “C”

Note (1) Light source is the BLU which is supplied by CMO and driving voltages are based on suitable gamma voltages.

Note (2) Definition of Viewing Angle (θx, θy):

Note (3) Definition of Contrast Ratio (CR):

θX- = 90º

www.jxlcd.com

6 o’clock

θ

y- = 90º

x-

y-

Normal

θx = θy = 0º

θy- θy+

θx−

θx+

12 o’clock direction

y+

θ

y+ = 90º

x+

θX+ = 90º

The contrast ratio can be calculated by the following expression.

Contrast Ratio (CR) = L255 / L0 L255: Luminance of gray level 255 L 0: Luminance of gray level 0 CR = CR (1) CR (X) is corresponding to the Contrast Ratio of the point X at Figure in Note (7).

17 / 25

Version 2.1

Note (4) Definition of Response Time (TR, TF):

.67 ms

Doc No.: 24058285

Issued Date: Nov. 28, 2006

Model No.: M190E5-P01

Approval

Note (5) Definition of Luminance of White (L

100%

90%

Optical

Response

10%

0%

Measure the luminance of gray level 255 at center point L

= L (1)

C

L (x) is corresponding to the luminance of the point X at Figure in Note (7).

Gray Level 255

T

R

66.67 ms

Gray Level 255

Time

T

F

66

):

C

Note (6) Measurement Setup:

www.jxlcd.com

The LCD module should be stabilized at given temperature for 20 minutes to avoid abrupt temperature change during measuring. In order to stabilize the luminance, the measurement should be executed after lighting Backlight for 20 minutes in a windless room.

LCD Module

LCD Panel

Center of the Screen

500 mm

BM-5A CS-1000T

Field of View = 2º

Light Shield Room (Ambient Luminance < 2 lux)

18 / 25

Version 2.1

Note (7) Definition of Transmittance Variation (δT%):

X

A

r

Measure the transmittance at 13 points

Doc No.: 24058285

Issued Date: Nov. 28, 2006

Model No.: M190E5-P01

Approval

δT% =

Maximum [L (1), L (2),……….L (12), L (13)] Minimum [L (1), L (2),…… ….L (12), L (13)]

Horizontal Line Numbe

10mm

6

H/4

23

H

9 10

7

1

8

：Test Point X＝1 to 13

45

H/4 H/4 H/4

www.jxlcd.com

11 12

10mm 10mm

10mm

W/4 W/4 W/4 W/4

W

ctive area

13

Note (8) Definition of Transmittance(T%):

Module is without signal input.

Transmittance =

Luminance of LCD module

＊ 100%

Luminance of backlight

19 / 25

Version 2.1

8. PACKAGING

8.1 PACKING SPECIFICATIONS

(1) 15 open cells / 1 Box (2) Box dimensions: 570 (L) X 570 (W) X 395 (H) mm (3) Weight: approximately 15.1Kg (15 open cells per box)

8.2 PACKI NG METHOD

(1) Carton Packing should have no failure in the following reliability test items

Test Item Test Conditions Note

ISTA STANDARD

Packing Vibration

Random, Frequency Range: 1 – 200 Hz Top & Bottom: 30 minutes (+Z), 10 min (-Z), Right & Left: 10 minutes (X) Back & Forth 10 minutes (Y)

Doc No.: 24058285

Issued Date: Nov. 28, 2006

Model No.: M190E5-P01

Approval

Non Operation

(2) Packing method.

www.jxlcd.com

20 / 25

Version 2.1

Doc No.: 24058285

Issued Date: Nov. 28, 2006

Model No.: M190E5-P01

Approval

www.jxlcd.com

21 / 25

Version 2.1

9. DEFINITION OF LABELS

9.1 OPEN CELL LABEL

The barcode nameplate is pasted on each open cell as illustration for CMO internal co ntrol.

Barcode definition:

Doc No.: 24058285

Issued Date: Nov. 28, 2006

Model No.: M190E5-P01

Approval

Serial ID: CM

19E51 Model number M190E5-P01=19E51

NNNN Serial number Manufacturing sequence of product

-19E51-X-X-X-XX-L-XX-L-YMD-NNNN

Code Meaning Description

CM Supplier code CMO=CM

X Revision code Non ZBD: 0~9, ZBD: A~Z X Source driver IC code

X Gate driver IC code

XX Cell location Tainan, Taiwan=TN

L Cell line # 0~12=1~C

XX Module location Tainan, Taiwan=TN

L Module line # 0~12=1~C

www.jxlcd.com

Year, month, day Year: 2001=1, 2002=2, 2003=3, 2004=4…

YMD

www.jxlcd.com

Century=1, CLL=2, Demos=3, Epson=4, Fujitsu=5, Himax=6, Hitachi=7, Hynix=8, LDI=9, Matsushita=A, NEC=B, Novatec=C, OKI=D, Philips=E, Renasas=F, Samsung=G, Sanyo=H, Sharp=I, TI=J, Topro=K, T oshiba=L, Windbond=M

Month: 1~12=1, 2, 3, ~, 9, A, B, C Day: 1~31= 1, 2, 3, ~, 9, A, B, C, ~, T, U, V

22 / 25

Version 2.1

9.2 CARTON LABEL

The barcode nameplate is pasted on each box as illustration, and its definitions are as following explanation

Doc No.: 24058285

Issued Date: Nov. 28, 2006

Model No.: M190E5-P01

Approval

(a) Model Name: M190E5 –P01

www.jxlcd.com

(b) Carton ID: CMO internal control (c) Quantities: 15

www.jxlcd.com

23 / 25

Version 2.1

Doc No.: 24058285

Issued Date: Nov. 28, 2006

Model No.: M190E5-P01

Approval

10. PRECAUTIONS

10.1 ASSEMBL Y AND HANDLING PRECAUTIONS

(1) Do not apply rough force such as bending or twisting to the product during assembly. (2) To assemble backlight or install module into user’s system can be only in clean working areas. The

dust and oil may cause electrical short or worsen the polarizer.

(3) It’s not permitted to have pressure or impulse on the module because the LCD panel will be

damaged.

(4) Always follow the correct power sequence when the product is connecting and operating. This can

prevent damage to the CMOS LSI chips during latch-up. (5) Do not pull the I/F connector in or out while the module is operating. (6) Use a soft dry cloth without chemicals for cleaning, because the surface of polarizer is very soft and

easily scratched. (7) It is dangerous that moisture come into or contacted the product, because moisture may damage the

product when it is operating. (8) High temperature or humidity may reduce the performance of module. Please store this product within

the specified storage conditions. (9) When ambient temperature is lower than 10ºC may reduce the display quality. For example, the

response time will become slowly.

10.2 SAFETY PRECAUTIONS

www.jxlcd.com

(1) If the liquid crystal material leaks from the panel, it should be kept away from the eyes or mouth. In

case of contact with hands, skin or clothes, it has to be washed away thorou ghly with soap. (2) After the product’s end of life, it is not harmful in case of normal operation and storage.

www.jxlcd.com

24 / 25

Version 2.1

www.jxlcd.com

Datasheet M190E5-P01 Datasheet (Chi Mei Optoelectronics)

Specifications and Main Features

Frequently Asked Questions

User Manual