Datasheet L series Specification

Download

Page 1

Slide

L Series

Miniature Slide Switches

Features/Benefits

Positive detent

•

• Enclosed housing

Typical Applications

Communications equipment

•

• Lighting devices

• Maintained and momentary functions

• PC and panel mounting

• RoHS compliant

Models Available

Specifications

CONTACT RATING: Q contact material (LX0X, LX1X Models): 4 AMPS

@ 125 V AC or 28 V DC; 2 AMPS @ 250 V AC; 0.5 AMP @ 125 V DC (UL). See page I-23 for additional ratings.

ELECTRICAL LIFE: 10,000 make-and-break cycles at full load. CONTACT RESISTANCE: Below 10 m Ω typ. initial

@ 2-4 V DC, 100 mA, for both silver and gold plated contacts. INSULATION RESISTANCE: 109Ω min. DIELECTRIC STRENGTH: 1,000 Vrms min. @ sea level. OPERATING TEMPERATURE: -30ºC to +65ºC STORAGE TEMPERATURE: -30ºC to +85ºC

NOTE: Specifications and materials listed above are for switches with standard options. For information on specific and custom switches, consult Customer Service Center.

Build-A-Switch

To order, simply select desired option from each category and place in the appropriate box. Available options are shown and described on pages I-20 through I-24. For additional options not shown in catalog, consult Customer Service Center.

Materials

HOUSING: 6/6 nylon (UL94V-2), black. ACTUATOR: 6/6 nylon (UL94V-2), black.

‘13’ actuator, natural (standard).

CONTACTS: Q contact material: Copper, silver plated. See page

I-23 for additional contact materials.

TERMINALS: Q contact material: Copper, silver plated. See page

I-23 for additional contact materials. CONTACT SPRING: Music wire or stainless steel. TERMINAL SEAL: Epoxy.

NOTE: Any models supplied with Q, B or G contact material are RoHS compliant.

Switch Function

L202 DPDT L203 DP3T L101 SPST L102 SPDT L103 SP3T L104 SP4T L112 SPDT, mom. L113 SP3T, mom. to one end L123 SP3T, L201 DPST L204 DP4T L212 DPDT

mom. to both ends

, mom.

Actuator

01 .200" high 02 .335" high 03 .375" high 05 .312" high 11 .100" high 12 Screwdriver slot 13 Plunger without cap 14 Plunger with .200" dia. cap 15 Plunger with .310" dia. cap 17 Plunger with .458" dia. cap 19 Plunger with .590" dia. cap

Detent

1 With detent 2 Without detent

Mounting Style

MS PC Thru-hole MA Right angle, PC thru-hole ML Right angle, PC thru-hole MV Right angle, PC thru-hole SS Panel with mounting ears TS Panel with integral mounting ears

Terminations

02 PC Thru-hole 01 Solder lug with notch 03 Solder lug with hole 04 PC Thru-hole 10 PC Thru-hole 06 Wire wrap 12 PC Thru-hole

Contact Material

Q Silver B Gold G Gold over silver

Seal

NONE No seal E Epoxy seal

Cap Color

2 Black NONE No cap

Specifications and dimensions subject to change

I–19

Dimensions are shown: Inches (mm)

www.ck-components.com

Page 2

Slide

L Series

.200 5,08

Cap part number 7089

Cap part number 8018

Cap part number 7982

Cap part number 8940

Miniature Slide Switches

SWITCH AND LOCK FUNCTION

AVAILABLE

MODEL

NO.

POLES

NOTE: and MOM. in table indicates momentary action.

All models with all options when ordered with ‘G’ or ‘Q’ contact material.

Contacts make on side actuator thrown.

NO.

L101

L102

L112

L103

L113

L123

L104

SPST ML, MS, SS

SPDT ML, MS, SS

SPDT-MOM. ML,MS,MV,SS

SP3T MA, MS, TS

SP3T-MOM. to one end MA, MS, TS

SP3T-MOM. to both ends MA, MS, TS

SP4T MS

SCHEMATICSWITCH FUNCTION

ACTUATOR

MOUNTING

STYLES

ACTUATOR

ACTUATOR OPTIONS FOR ‘MS, MA, ML, SS, & TS’ MOUNTING STYLES

.200" HIGH

.335" HIGH

.375" HIGH

NO.

POLES

MODEL

NO.

L201

L202

L212

L203

L204

.312" HIGH

SWITCH

FUNCTION

DPST MA, MS, SS

DPDT MA, MS, SS

DPDT-MOM. MV

DP3T MS, TS

DP4T MS

CAP COLOR

.100" HIGH

SCHEMATIC

SCREWDRIVER SLOT

AVAILABLE

MOUNTING

STYLES

NOTE: No actuator color option code is required. Standard actuator color is

black, other colors and heights available, consult Customer Service Center. See pages I-20 and I-22 for available mounting styles.

ACTUATOR OPTIONS FOR ‘MV’ MOUNTING STYLE

PLUNGER WITHOUT CAP

PLUNGER WITH CAP

ACTUATOR CAPS

Caps supplied are not installed standard. To order actuator options ‘14 thru 19,’ select desired cap color from chart and place option code in last box of ordering format. Leave box empty for all other actuator options. Caps may also be ordered separately and user installed, see pages I-23 and I-24. Specify the four digit part number and desired cap color. For switches without caps, order ‘13’ or ‘23’ actuator option. Cap finish: gloss (excluding square cap part number 7982, finish: matte).

PLUNGER WITH CAP

Other colors available, consult Customer Service Center.

SPLASH CAPS

New protective splash caps for PC mounted slide switches are available separately and reusable. They provide splash protection during soldering and cleaning processes. To order specify correct part number, see page I-24.

OPTION

CODE

NONE

ACTUATOR CAP

COLORS

BLACK

01-13 ACTUATORS

I–20

Specifications and dimensions subject to change

Dimensions are shown: Inch (mm)

www.ck-components.com

Page 3

Slide

DETENT

.425

(10,79)

.752

(19,10)

.150 TRAVEL (3,81)

.125 TYP (3,18)

.200

(5,08)

.200

(5,08)

.070 TYP

(1,78)

.221 TYP (5,61)

.181 TYP (4,60)

.288 (7,32)

.050 X .020 TYP (1,27) X (0,51)

.225 TYP (5,71)

TERMINAL NOS. FOR

REFERENCE ONLY

6 5 4

3 2 1

.181 TYP

(4,60)

.065 DIA (1,65) TYP

.225 TYP (5,70)

.400

(10,16)

0.941

(23,90)

.335 (8,51)

.412

(10,46)

.100 TYP (2,54)

4 3 2 1

0.125 (3,18)

.200 (5,08)

.140

(4,06)

TRAVEL

.215 (5,46)

.256 (6,50)

.100 TYP (2,54)

.181 TYP (4,60)

4 3 2 1

TERM. NOS. FOR REFERENCE ONLY

.425

(10,79)

1.122

(28,50)

.170 TRAVEL (4,32) TYP

.200

(5,08)

.070 TYP

(1,78)

.050 TYP (1,27)

.181 TYP (4,60)

.288 (7,32)

.050 X .020 TYP (1,27) X (0,51)

.225 TYP (5,71)

TERMINAL NOS. FOR

REFERENCE ONLY

5 4 3 2 1

.181 TYP

(4,60)

.065 DIA (1,65) TYP

.225 TYP (5,70)

.232 TYP

(5,89)

9 8 7 6

WITH DETENT

Standard with all maintained models: L101, L102, L103, L104, L113, L201, L202, L203 and L204.

WITHOUT DETENT

Standard with all momentary models: L112, L123, and L212.

MOUNTING STYLE

PC THRU-HOLE, 2 POSITION MODELS

PC THRU-HOLE, 3 POSITION MODELS

L Series

Miniature Slide Switches

AVAILABLE WITH: Models: L101, L102, L112, L103, L113 L123,

L201, L202, L203, L104 and L204

Terminations: 02, 06, 10 and 12 Actuators: 01, 02, 03, 05, 11 and 12

PC MOUNTING

For mounting information, see TERMINATIONS section, page I-23.

Splash caps ar and reusable, see page I-24.

e available separately

L203011MS02Q

DP3T

PC THRU HOLE, 4 POSITION MODELS

RIGHT ANGLE, PC THRU-HOLE

RIGHT ANGLE, PC, SP-3 POSITION MODELS

AVAILABLE WITH: Models: L103, L201, L202, L113 and L123

Terminations: 04 Actuators: 02 and 12

PC MOUNTING

For mounting information, see TERMINA

TIONS section, page I-23.

Splash caps ar and reusable, see page I-24.

e available separately

L202021MA04Q

Horizontal Actuation

DPDT

I–21

Specifications and dimensions subject to change

Dimensions are shown: Inches (mm)

www.ck-components.com

Page 4

Slide

.425

(10,80)

.160 TYP (4,06) TRAVEL

.125

(3,18)

1.000

(25,40)

.941

(23,90)

.200

(5,08)

.200

(5,08)

.070 TYP

(1,78)

.240 (6,10)

.181

(4,60)

TYP

.358

(9,09)

1.000

(25,40)

.135 (3,43)

.110 DIA (2,79ø)

.530

(13,46)

CAVITY I.D.

0.0625 HIGH X

0.010 RAISED

0.080 (2,03)

FULL R

TYP.

0.250 (6,35)

ø 0.100 TYP (2,54)

2X 0.218 (5,53)

2X 0.050 (1,27)

2X 0.050

(1,27)

0.100 (2,54)

1.000

(25,40)

L Series

.110 DIA (2,79ø) TYP

.360

(9,14)

1.000

(25,40)

.135 (3,43)

.225

(5,72)

.760

(19,30)

.181 TYP (4,60)

.358

(9,09)

.070 TYP (1,78)

.240 (6,10)

.050 (1,27)

.200

(5,08)

.200

(5,08)

1.200

(30,48)

1.000

(25,40)

.425

(10,60)

.125 (3,18)

.150

(3,81)

TRAVEL

ø .100 (2,54)

Miniature Slide Switches

MOUNTING STYLE

RIGHT ANGLE, PC THRU-HOLE

AVAILABLE WITH: Models: L101, L102, L112

Terminations: 04 Actuators: 01, 02, 05, 11 and 12 PC MOUNTING

For mounting information, see TERMINATIONS section, page I-23.

Splash caps are available separately and r

eusable, see page I-24.

VAILABLE WITH:

A Models: L112 and L212

erminations: 02, 06, 10 and 12

Actuators: 13 thru 19

PC MOUNTING

For mounting information, see TERMINATIONS section, page I-23.

Splash caps ar and reusable, see page I-24.

e available separately

L102021ML04Q

Horizontal Actuation

SPDT

L212132MV02Q

DPDT

PANEL WITH MOUNTING EARS

L202011SS03Q

DPDT

PANEL WITH INTEGRAL MOUNTING EARS

L203011TS03Q

DP3T

PANEL MOUNTING

AVAILABLE WITH: Models: L101, L102, L112, L201 and L202

Terminations: 01, 02, 03, 06, 10, 12 Actuators: 01, 02, 03, 05, 11 and 12

PANEL MOUNTING

I–22

AVAILABLE WITH: Models: L103, L113, L123 and L203

Terminations: 01, 02, 03, 06, 10, 12 Actuators: 01, 02, 03, 05, 11 and 12

Specifications and dimensions subject to change

Dimensions are shown: Inch (mm)

www.ck-components.com

Page 5

Slide

EPOXY

.075 MAX. (1,91)

.240

(6,10)

.028 (0,71)

.020 THK. (0,51)

.080

(2,03)

.062

(1,57)

.226

(5,74)

.050 (1,27)

.020 THK. (0,51)

.080

(2,03)

.060

(1,52)

.240

(6,10)

.046 (1,17)

.020 THK. (0,51)

.080

(2,03)

.085

(2,16)

.256

(6,50)

.050 (1,27)

.020 THK. (0,51)

.080

(2,03)

.085

(2,16)

.181 TYP.

(4,60)

.225

(5,72)

.065 DIA

(1,65ø)

TYP.

.187 TYP.

(4,75)

.065 DIA

(1,65ø

TYP.

.181 TYP.

(4,60)

.272

(6,91)

.065 DIA

(1,65ø)

TYP.

.181 TYP.

(4,60)

.225

(5,72)

.065 DIA

(1,65ø)

TYP.

.181 TYP.

(4,60)

.272

(6,91)

.065 DIA

(1,65ø)

TYP.

.181 TYP.

(4,60)

.225

(5,72)

.065 DIA

(1,65ø)

TYP.

.181 TYP.

(4,60)

.272

(6,91)

.065 DIA

(1,65ø)

TYP.

All models with ‘04’ terminations and ‘ML’ mounting style.

All 2 position models, except ‘04’ and ‘10’ terminations.

All 2 position models with ‘04’ and ‘10’ terminations.

All 3 position models except ‘04’ and ‘10’ terminations.

All 3 position models, with ‘10’ termination.

All 4 position models, except ‘04’ and ‘10’ terminations.

All 4 position models, with ‘10’ terminations.

.445

(11,30)

.050 (1,27)

.020 THK. (0,51)

.080

(2,03)

.065

(1,65)

.226

(5,74)

.050 (1,27)

.020 THK. (0,51)

.080

(2,03)

.272

(6,91)

.419

(10,64)

.050 (1,27)

.020 THK. (0,51)

.080

(2,03)

‘MS, MV, SS & TS’ Mounting Styles Only

PC THRU-HOLE

TERMINATIONS

SOLDER LUG WITH NOTCH

SOLDER LUG WITH HOLE

WIRE WRAP

L Series

Miniature Slide Switches

PC THRU-HOLE

‘MA & ML’ Mounting Styles Only

PC THRU-HOLE

CONTACT MATERIAL

OPTION

CODE

* Note: See Technical Data section of this catalog for RoHS compliant and compatible definitions and specifications.

CONTACTS & TERMINALS: Copper, with gold plate over nickel plate.

CONTACTS & TERMINALS: Copper, silver plated (standard with all termination options).

CONTACTS & TERMINALS: Copper, with gold plate over nickel plate over silver plate.

CONTACT

MATERIAL

SILVER

GOLD

GOLD OVER

SILVER

RATINGS

LOW LEVEL/DRY

CIRCUIT

POWER

LOW LEVEL/DRY

CIRCUIT OR POWER

LX0X, LX1X MODELS: 4 AMPS @ 125 V AC or 28 V DC; 2 AMPS @ 250 V AC;

0.5 AMP @ 125 V DC (UL). LX6X MODELS: 4 AMPS @ 125 V AC or 28 V DC; 2 AMPS @ 250 V AC (UL).

0.4 VA MAX. @20 V AC OR DC max.

LX0X, LX1X MODELS: 0.4 VA MAX. @ 20 V AC or DC MAX. or 4 AMPS @ 125 V AC or 28 V DC; 2 AMPS @ 250 V AC; 0.5 AMP @ 125 V DC (UL). LX6X MODELS: 0.4 VA MAX. @ 20 V AC or DC MAX. or 4 AMPS @ 125 V AC or 28 V DC; 2 AMPS @ 250 V AC (UL).

NOTE: Any models supplied with Q, B or G contact material are RoHS compliant.

All models with all options when ordered with ‘G’ or ‘Q’ contact material.

NOTE: ‘G’ contact material is equivalent to both ‘B’ and ‘Q’ contact materials.

SEAL

NONE

NO SEAL

EPOXY SEAL

I–23

Specifications and dimensions subject to change

Dimensions are shown: Inches (mm)

www.ck-components.com

Page 6

Slide

.200 DIA. (5,08 )

.120 (3,05)

.155 (3,94)

.375 DIA. (9,53 )

.120 (3,05)

.250

(6,35)

.310 DIA. (7,87 )

.250 (6,35)

.138 (3,51)

.450 SQ. (11,43)

.195 (4,95)

.240

(6,10)

L Series Miniature Slide Switches

AVAILABLE HARDWARE