Page 1
S Series 100 Watt AC-DC Converters
Input voltage range from 85…264 V AC
1 or 2 isolated outputs up to 48 V DC
4 kV AC I/O electric strength test voltage
LGA
• Rugged electrical and mechanical design
• Wide input frequency range from 47...440 Hz
• Operating ambient temperature range
–40...71 °C with convection cooling
Selection chart
Output 1 Output 2 Input voltage Type Options
U
o nomIo nom
[V DC] [A] [V DC] [A] [V AC]
5.1 16 - - 85...264 LS 1001-7R -9, E, D, V, P, T, B1
12 8 - - 85...264 LS 1301-7R -9, E, D, P, T, B1
15 6.5 - - 85...264 LS 1501-7R -9, E, D, P, T, B1
24 4.2 - - 85...264 LS 1601-7R -9, E, D, P, T, B1
24 4 - - 85...264 LS 2320-7R -9, E, D, P, T, B1
30 3.2 - - 85...264 LS 2540-7R -9, E, D, P, T, B1
48 2 - - 85...264 LS 2660-7R -9, E, D, P, T, B1
12 4 12 4 85...264 LS 2320-7R -9, E, D, P, T, B1
15 3.2 15 3.2 85...264 LS 2540-7R -9, E, D, P, T, B1
24 2 24 2 85...264 LS 2660-7R -9, E, D, P, T, B1
U
o nomIo nom
U
i
www.power-one.com
Edition 4/04.2001
1
Page 2
Cassette Style S Series
Input
Input voltage AC wide input range 85...264 V AC
Input frequency 47...440 Hz
Input voltage DC 88...372 V DC
Inrush current limitation by thermistor
Output
Efficiency
Output voltage setting accuracy
Output voltage switching noise IEC/EN 61204, total typ. 90 mV
Line regulation
Load regulation
Minimum load not required 0 A
Current limitation rectangular U/I characteristic typ. 110%
Operation in parallel by current limitation
Hold-up time
Control and protection
Input fuse not user accessible 4 AT
Input undervoltage lockout typ. 90%
Input overvoltage lockout typ. 109%
Input transient protection varistor
Output no-load, overload and short circuit proof
Output overvoltage suppressor diode in each output typ. 130%
Overtemperature switch-off with auto restart
Output voltage adjustment 0...110%
Inhibit TTL input, output(s) disabled if open circuit
Status indication LEDs: OK, inhibit, overload
U
U
U
U
U
i nom
i nom
i min
i nom
i nom
,
I
o nom
,
I
o nom
...
U
,
I
i max
o nom
, 10...100%
,
I
o nom
I
symmetrical output load typ. 0.5 %
o nom,
up to 85 %
±0.6%
typ. ±0.3%
T
typ. 100°C
C
U
o nom
U
o nom
U
o nom
I
o nom
80 ms
U
i min
U
i max
U
o nom
U
o nom
pp
Safety
Approvals EN 60950, UL 1950, CSA 22.2 No. 950
Class of equipment class I
Protection degree IP 30
Electric strength test voltage I/case 2 kV AC
I/O 4 kV AC
O/case 1 kV AC
O/O 0.1 kV AC
EMC
Electrostatic discharge IEC/EN 61000-4-2, level 4 (8/15 kV) criterion A
Electromagnetic field IEC/EN 61000-4-3, level x (20 V/m) criterion A
Electr. fast transients/bursts IEC/EN 61000-4-4, level 4 (2/4 kV) criterion A
Surge IEC/EN 61000-4-5, level 3 (2 kV) criterion A
Conducted disturbances IEC/EN 61000-4-6, level 3 (10 V) criterion A
Electromagnetic emissions CISPR 22/EN 55022 class B
www.power-one.com
Edition 4/04.2001
2
Page 3
S Series 100 Watt AC-DC Converters
Environmental
Operating ambient temperature
Operating case temperature
Storage temperature non operational –40...100°C
Damp heat IEC/EN 60068-2-3, 93%, 40°C 56 days
Vibration, sinusoidal IEC/EN 60068-2-6, 10...60/60...2000 Hz 0.35 mm/5 g
Shock IEC/EN 60068-2-27, 6 ms 100 g
Bump IEC/EN 60068-2-29, 6 ms 40 g
Random vibration IEC/EN 60068-2-64, 20...500 Hz 4.9 g
MTBF MIL-HDBK-217F, GB, 40°C 500'000 h
Options
Extended temperature range –40...71°C, ambient, operating -9
Electronic inrush current limitation E
Output voltage adjustment 40...110%
Input and/or output undervoltage monitoring, excludes option V D0…D9
Input and/or output undervoltage monitoring (VME), excludes option D V0, V2, V3
Current sharing T
Cooling plate B1
Pin allocation
Pin LS 4000 LS 5000
4 Vo1+ Output 1 Vo2+ Output 2
6 Vo1+ Vo2+
8 Vo1– Output 1 Vo2– Output 2
10 Vo1– Vo2–
12 S+ Sense Vo1+ Output 1
14 S– Sense Vo1–
16 R Control of
18 i Inhibit i Inhibit
20 D Save data D Save data
22 T Current sharing T Current sharing
24 Protective earth Protective earth
26 N Neutral N Neutral
28 N N
30 P Phase P Phase
32 P P
U
,
I
, convection cooled –25...71°C
o nom
,
I
o nom
TCU
i nom
i nom
U
V ACFAIL
–25...95°C
, excludes feature R and vice versa P
o nom
U
o1
R Control of
n rms
U
o1
n
n
n
www.power-one.com
Edition 4/04.2001
S10002
30 26 22 18 14 10 6
32 28 24 20 16 12 8 4
3
Page 4
Cassette Style S Series
Mechanical data
Tolerances ±0.3 mm (0.012") unless otherwise indicated.
European
Projection
M4
171.93 (DIN 41494) (6.77")
Measuring point of
case temperature
152 (5.98")
168.5 (6.63")
7 TE
T
C
100 (3.93")
111 (3U) 4.37")
09004
11.8 (0.46")
25.9
(1.02")
5 TE
Test jacks
Option P (Uo)
Option D (Uto)
Option D (Uti)
LED i
LED OK
LED IoL
60 (2.36")
Accessories
Front panels 19" (Schroff/Intermas)
Mating H15 connectors with screw, solder, fast-on or press-fit terminals
Connector retention facilities and code key system for connector coding
Chassis or wall mounting plates for frontal access
Universal mounting brackets for chassis or DIN-rail mounting
www.power-one.com
Edition 4/04.2001
4
Loading...