Datasheet LM136-5.0MW8 Datasheet (NSC)

LM136-5.0/LM236-5.0/LM336-5.0

5.0V Reference Diode

General Description

The LM136-5.0/LM236-5.0/LM336-5.0 integrated circuits are
precision 5.0V shunt regulator diodes. These monolithic IC
voltage references operate as a low temperature coefficient

5.0V zener with 0.6Ω dynamic impedance. A third terminal
on the LM136-5.0 allows the reference voltage and tempera­ture coefficient to be trimmed easily.

The LM136-5.0 series is useful as a precision 5.0V low volt­age reference for digital voltmeters, power supplies or op
amp circuitry. The 5.0V makes it convenient to obtain a
stable reference from low voltage supplies. Further, since
the LM136-5.0 operates as a shunt regulator, it can be used
as either a positive or negative voltage reference.

The LM136-5.0 is rated for operation over −55˚C to +125˚C
while the LM236-5.0 is rated over a −25˚C to +85˚C tem­perature range. The LM336-5.0 is rated for operation over a

0˚C to +70˚C temperature range. See the connection dia­grams for available packages. For applications requiring

2.5V see LM136-2.5.

Features

n Adjustable 4V to 6V
n Low temperature coefficient
n Wide operating current of 600 µA to 10 mA
n 0.6Ω dynamic impedance

n

±

1%initial tolerance available

n Guaranteed temperature stability
n Easily trimmed for minimum temperature drift
n Fast turn-on
n Three lead transistor package

Connection Diagrams

TO-92

Plastic Package

DS005716-4

Bottom View

Order Number LM236AZ-5.0, LM336Z-5.0 or LM336BZ-5.0

See NS Package Number Z03A

TO-46

Metal Can Package

DS005716-5

Bottom View

Order Number LM136H-5.0,

LM136H-5.0/883, LM236H-5.0,

LM136AH-5.0, LM136AH-5.0/883,

or LM236AH-5.0

See NS Package Number H03H

June 1999

LM136-5.0/LM236-5.0/LM336-5.0 5.0V Reference Diode

© 1999 National Semiconductor Corporation DS005716 www.national.com

Connection Diagrams (Continued)

Typical Applications

SO Package

DS005716-7

Order Number LM336M-5.0 or LM336BM-5.0

See NS Package Number M08A

5.0V Reference

DS005716-1

5.0V Reference with Minimum
Temperature Coefficient

DS005716-15

†

Adjust to 5.00V

* Any silicon signal diode

Trimmed 4V to 6V Reference
with Temperature Coefficient

Independent of Breakdown Voltage

DS005716-3

* Does not affect temperature coefficient

www.national.com 2

Absolute Maximum Ratings (Note 1)

If Military/Aerospace specified devices are required,
please contact the National Semiconductor Sales Office/
Distributors for availability and specifications.

Reverse Current 15mA
Forward Current 10mA
Storage Temperature −60˚C to +150˚C

Operating Temperature Range (Note 2)

LM136-5.0 −55˚C to +150˚C
LM236-5.0 −25˚C to +85˚C

LM336-5.0 0˚C to +70˚C

Soldering Information

TO-92 Package (10 sec.) 260˚C
TO-46 Package (10 sec.) 300˚C
SO Package

Vapor Phase (60 sec.) 215˚C
Infrared (15 sec.) 220˚C

See AN-450 “Surface Mounting Methods and Their Effect on
Product Reliability” (appendix D) for other methods of solder­ing surface mount devices.

Electrical Characteristics

(Note 3)

LM136A-5.0/LM236A-5.0 LM336B-5.0

Parameter Conditions LM136-5.0/LM236-5.0 LM336-5.0 Units

Min Typ Max Min Typ Max

Reverse Breakdown Voltage T

A

=

25˚C, I

R

=

1mA
LM136-5.0/LM236-5.0/LM336-5.0 4.9 5.00 5.1 4.8 5.00 5.2 V
LM136A-5.0/LM236A-5.0, LM336B-5.0 4.95 5.00 5.05 4.90 5.00 5.1 V

Reverse Breakdown Change T

A

=

25˚C, 6 12 6 20 mV

With Current 600 µA≤I

R

≤10 mA

Reverse Dynamic Impedance T

A

=

25˚C, I

R

=

1 mA, f=100 Hz 0.6 1.2 0.6 2 Ω

Temperature Stability V

R

Adjusted 5.00V

(Note 4) I

R

=

1 mA, (

Figure 2

)

0˚C≤T

A

≤70˚C (LM336-5.0) 4 12 mV

−25˚C≤T

A

≤+85˚C (LM236-5.0) 7 18 mV

−55˚C≤T

A

≤+125˚C (LM136-5.0) 20 36 mV

Reverse Breakdown Change 600 µA≤I

R

≤10 mA 6 17 6 24 mV
With Current
Adjustment Range Circuit of

Figure 1

±

1

±

1V

Reverse Dynamic Impedance I

R

=

1 mA 0.8 1.6 0.8 2.5 Ω

Long Term Stability T

A

=

25˚C

±

0.1˚C, I

R

=

1 mA, t=1000 hrs 20 20 ppm

Note 1: Absolute Maximum Ratings indicate limits beyond which damage to the device may occur. Electrical specifications do not apply when operating thedevice
beyond its specified operating conditions.

Note 2: For elevated temperature operation, T

j

max is:
LM136 150˚C
LM236 125˚C
LM336 100˚C

Thermal Resistance TO-92 TO-46 SO-8

θ

ja

(Junction to Ambient) 180˚C/W (0.4" Leads) 440˚C/W 165˚C/W

170˚C/W (0.125"
Leads)

θ

ja

(Junction to Case) N/A 80˚C/W N/A

Note 3: Unless otherwise specified, the LM136-5.0 is specified from −55˚C≤TA≤+125˚C, the LM236-5.0 from −25˚C≤TA≤+85˚C and the LM336-5.0 from
0˚C≤T

A

≤+70˚C.

Note 4: Temperaturestabilityfor the LM336 and LM236 family is guaranteed by design. Design limits are guaranteed (but not 100%percent production tested) over
the indicated temperature and supply voltage ranges. These limits are not used to calculate outgoing quality levels. Stability is defined as the maximum charge in
V

REF

from 25˚C to TA(min) or TA(max).

www.national.com3

Typical Performance Characteristics

Application Hints

The LM136-5.0 series voltage references are much easier to
use than ordinary zener diodes. Their low impedance and
wide operating current range simplify biasing in almost any
circuit. Further,either the breakdown voltage or the tempera­ture coefficient can be adjusted to optimize circuit perfor­mance.

Figure 1

shows an LM136-5.0 with a 10k potentiometer for
adjusting the reverse breakdown voltage. With the addition
of R1 the breakdown voltage can be adjusted without affect­ing the temperature coefficient of the device. The adjustment
range is usually sufficient to adjust for both the initial device
tolerance and inaccuracies in buffer circuitry.

If minimum temperature coefficient is desired, four diodes
can be added in series with the adjustment potentiometer as
shown in

Figure 2

. When the device is adjusted to 5.00V the
temperature coefficient is minimized. Almost any silicon sig­nal diode can be used for this purpose such as a 1N914,
1N4148 or a 1N457. For proper temperature compensation
the diodes should be in the same thermal environment as
the LM136-5.0. It is usually sufficient to mount the diodes
near the LM136-5.0 on the printed circuit board. The abso­lute resistance of the network is not critical and any value
from 2k to 20k will work. Because of the wide adjustment
range, fixed resistors should be connected in series with the
pot to make pot setting less critical.

Reverse Voltage Change

DS005716-17

Zener Noise Voltage

DS005716-18

Dynamic Impedance

DS005716-19

Response Time

DS005716-20

Reverse Characteristics

DS005716-21

Temperature Drift

DS005716-22

Forward Characteristics

DS005716-23

www.national.com 4

Application Hints (Continued)

DS005716-9

FIGURE 1. LM136-5.0 with Pot for Adjustment of

Breakdown Voltage (Trim Range

=

±

1.0V Typical)

DS005716-10

FIGURE 2. Temperature Coefficient Adjustment

(Trim Range

=

±

0.5V Typical)

www.national.com5

Typical Applications

Precision Power Regulator with Low Temperature Coefficient

DS005716-11

* Adjust for 6.25V across R1

5V Crowbar

DS005716-12

Adjustable Shunt Regulator

DS005716-13

www.national.com 6

Typical Applications (Continued)

Linear Ohmmeter

DS005716-14

Op Amp with Output Clamped

DS005716-24

Bipolar Output Reference

DS005716-25

5.0V Square Wave Calibrator

DS005716-26

10V Buffered Reference

DS005716-27

www.national.com7

Typical Applications (Continued)

Low Noise Buffered Reference

DS005716-28

Wide Input Range Reference

DS005716-29

www.national.com 8

Schematic Diagram

DS005716-16

www.national.com9

Physical Dimensions inches (millimeters) unless otherwise noted

TO-46 Metal Can Package (H)

Order Number LM136H-5.0, LM136H-5.0/883, LM236H-5.0,

LM136AH-5.0, LM136AH-5.0/883 or LM236AH-5.0

NS Package Number H03H

Small Outline (SO-8) Package

Order Number LM336M-5.0 or LM336BM-5.0

NS Package Number M08A

www.national.com 10

Physical Dimensions inches (millimeters) unless otherwise noted (Continued)

LIFE SUPPORT POLICY

NATIONAL’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT
DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT AND GENERAL
COUNSEL OF NATIONAL SEMICONDUCTOR CORPORATION. As used herein:

1. Life support devices or systems are devices or
systems which, (a) are intended for surgical implant
into the body, or (b) support or sustain life, and
whose failure to perform when properly used in
accordance with instructions for use provided in the
labeling, can be reasonably expected to result in a
significant injury to the user.

2. A critical component is any component of a life
support device or system whose failure to perform
can be reasonably expected to cause the failure of
the life support device or system, or to affect its
safety or effectiveness.

National Semiconductor
Corporation

Americas
Tel: [phone]
Fax: [phone]
Email: [e-mail]

National Semiconductor
Europe

Fax: [phone]

Email: [e-mail]
Deutsch Tel: [phone]
English Tel: [phone]
Français Tel: [phone]
Italiano Tel: [phone]

National Semiconductor
Asia Pacific Customer
Response Group

Tel: [phone]
Fax: [phone]
Email: [e-mail]

National Semiconductor
Japan Ltd.

Tel: [phone]
Fax: [phone]

www.national.com

Plastic Package (Z)

Order Number LM236AZ-5.0, LM336Z-5.0 or LM336BZ-5.0

NS Package Number Z03A

LM136-5.0/LM236-5.0/LM336-5.0 5.0V Reference Diode

National does not assume any responsibility for use of any circuitry described, no circuit patent licenses are implied and National reserves the right at any time without notice to change said circuitry and specifications.