Datasheet LMZ1501-7R, LMZ1301-7R, LMZ3020-7, LMZ2540-7, LMZ2320-7 Datasheet (POWER-ONE)

...

Download

Page 1

www.power-one.com

Edition 4/04.2001

• Rugged electrical and mechanical design

• Outputs individually controlled with excellent dynamic properties

• Operating ambient temperature range –40...71°C with convection cooling

M Series 50 Watt AC-DC Converters

Input voltage range 85...264 V AC 1, 2 or 3 isolated outputs up to 48 V DC 4 kV AC I/O electric strength test voltage

Selection chart

Output 1 Output 2 Output 3 Input Type Options

o nomIo nomUo nomIo nomUo nomIo nom

voltage

[V DC] [A] [V DC] [A] [V DC] [A]

[V AC]

5.1 8 - - - - 85...264 LM 1001-7R -9, E, P, D, V, A, H, F

5.1 8 - - - - 85...264 LMZ 1001-7R -9, E, P, D, V, A, H, F 12 4 - - - - 85...264 LM 1301-7R -9, E, P, D, A, H, F 12 4 - - - - 85...264 LMZ 1301-7R -9, E, P, D, A, H, F 15 3.4 - - - - 85...264 LM 1501-7R -9, E, P, D, A, H, F 15 3.4 - - - - 85...264 LMZ 1501-7R -9, E, P, D, A, H, F 24 2 - - - - 85...264 LM 1601-7R -9, E, P, D, A, H, F 24 2 - - - - 85...264 LMZ 1601-7R -9, E, P, D, A, H, F 48 1 - - - - 85...264 LM 1901-7R -9, E, P, D, A, H, F 48 1 - - - - 85...264 LMZ 1901-7R -9, E, P, D, A, H, F

12 2 12 2 - - 85...264 LM 2320-7 -9, E, P, D, A, H, F 12 2 12 2 - - 85...264 LMZ 2320-7 -9, E, P, D, A, H, F 15 1.7 15 1.7 - - 85...264 LM 2540-7 -9, E, P, D, A, H, F 15 1.7 15 1.7 - - 85...264 LMZ 2540-7 -9, E, P, D, A, H, F

5.1 5 12 0.7 12 0.7 85...264 LM 3020-7 -9, E, P, D, V, A, H, F

5.1 5 12 0.7 12 0.7 85...264 LMZ 3020-7 -9, E, P, D, V, A, H, F

5.1 5 15 0.6 15 0.6 85...264 LM 3040-7 -9, E, P, D, V, A, H, F

5.1 5 15 0.6 15 0.6 85...264 LMZ 3040-7 -9, E, P, D, V, A, H, F

LGA

Page 2

www.power-one.com

Edition 4/04.2001

Cassette Style M Series

Input

Input voltage continuous range 85...264 V AC Input frequency 47...65(440) Hz Inrush current limitation by thermistor

Output

Efficiency

i nom

o nom

up to 81 %

Output voltage setting accuracy

i nom

o nom

±0.6%

o nom

Output voltage switching noise IEC/EN 61204, total typ. 50 mV

Line regulation

i min

...

i max

o nom

, each output regulated typ. ±0.2 %

o nom

Load regulation

i nom

, 0...

o nom

, each output regulated typ. 0.15 %

o nom

Minimum load not required 0 A Current limitation main output rectangular U/I characteristic typ. 110%

o nom

Current limitation aux. output(s) rectangular U/I characteristic typ. 120%

o nom

Operation in parallel by current limitation, only main outputs Hold-up time

= 230 V AC,

o nom

typ. 90 ms

Protection

Input fuse built-in T 2.5 A, 250 V AC Input undervoltage lockout typ. 80%

i min

Input overvoltage lockout typ. 110%

i max

Input transient protection varistor or suppressor diode Output no-load, overload and short circuit proof Output overvoltage suppressor diode in each output typ. 150%

o nom

Overtemperature switch-off with auto restart

typ. 100 °C

Control

Output voltage adjustment single output types 0...110%

o1 nom

Inhibit TTL input, output(s) disabled if open circuit Status indication LEDs: OK, inhibit, overload

Safety

Approvals EN 60950, UL 1950, CSA C22.2 No. 950 Class of equipment LM class I

LMZ class II Protection degree units without options IP 40 Electric strength test voltage class I, I/case 2 kV AC

class I, I/O 4 kV AC

class II (LMZ), I/O and I/case 4 kV AC

O/case 1 kV AC

O/O 0.2 kV AC

Page 3

www.power-one.com

Edition 4/04.2001

EMC

Electrostatic discharge IEC/EN 61000-4-2, level 4 (8/15 kV) criterion A Electromagnetic field IEC/EN 61000-4-3, level x (20 V/m) criterion A/B Electr. fast transients/bursts IEC/EN 61000-4-4, input, level 3/4 (2/4 kV) criterion A/B Surge IEC/EN 61000-4-5, input, level 3/4 (2/4 kV) criterion A Conducted disturbances IEC/EN 61000-4-6, level 3 (10 V) criterion B Electromagnetic emissions CISPR 22/EN 55022, class I, conducted class B

Environmental

Operating ambient temperature

i nom

o nom

, convection cooled –25...71°C

Operating case temperature

TCU

i nom

o nom

–25...95°C Storage temperature non operational –40...100°C Damp heat IEC/EN 60068-2-3, 93%, 40°C 56 days Vibration, sinusoidal IEC/EN 60068-2-6, 10...60/60...2000 Hz 0.35 mm/5 g

Shock IEC/EN 60068-2-27, 6 ms 100 g

Bump IEC/EN 60068-2-29, 6 ms 40 g

Random vibration IEC/EN 60068-2-64, 20…500 Hz 4.9 g

n rms

MTBF MIL-HDBK-217E, GB, 40°C, single output types 320'000 h

Options

Extended temperature range –40...71°C, ambient, operating -9 Electronic inrush current limitation E Output voltage adjustment 95...105%

o nom

, excludes feature R and vice versa P Input and/or output undervoltage monitoring, excludes option V D0...D9 Input and/or output undervoltage monitoring (VME), excludes option D V1...V3 Test sockets for check of output voltage A Enhanced electric strength test 2 kV AC H Fuse not user accessible F

Pin allocation

Pin Electrical determination LM 1000 LMZ 1000 LM 2000 LMZ 2000 LM 3000 LMZ 3000

2 Inhibit control input iiiiii 5 Data safe or ACFAIL D or V D or V D or V D or V D or V D or V

8 Output voltage (positive) Vo1+ Vo1+ Vo3+ Vo3+

11 Output voltage (negative) Vo1– Vo1– Vo3– Vo3– 14 Control input + R R

17 Control input – GG 14 Output voltage (positive) Vo2+ Vo2+ Vo2+ Vo2+

17 Output voltage (negative) Vo2– Vo2– Vo2– Vo2– 20 Output voltage (positive) Vo1+ Vo1+ Vo1+ Vo1+ Vo1+ Vo1+

23 Output voltage (negative) Vo1– Vo1– Vo1– Vo1– Vo1– Vo1– 26 Protective earth 29 AC input voltage N N N N N N

32 AC input voltage P P P P P P

M Series 50 Watt AC-DC Converters

Page 4

www.power-one.com

Edition 4/04.2001

Cassette Style M Series

Mechanical data

Tolerances ±0.3 mm (0.012") unless otherwise indicated.

European Projection

Accessories

Front panels 19” (Schroff/Intermas) Mating H11 connectors with screw, solder, fast-on or press-fit terminals Connector retention facilities and code key system for connector coding Flexible PCB for connecting the converter via an H11 connector, if mounted on a PCB Chassis or wall mounting plates for frontal access Universal mounting brackets for chassis or DIN-rail mounting

111.2 (3U) (4.38")

168.5 (6.63")

127 (5")

173.7 (6.84")

20 (0.79")

6TE

141720

29 32

38.7 (1.52")

Measuring point for

case temperature

M 3; depth = 4 mm (chassis mount)

2TE

Test sockets (option A) Potentiometer(s) (option P)

Inhibit i

Potentiometer (option D)

or potentiometer (option V)

S09012

103

22 (0.87")