Page 1
LED Lights
Touch−Dimmable LED Light Bar
Features
Includes Installation Clips and 12VDC, 1A Power Supply
Dimmable, OFF − 6% − 50% − 100% − OFF
DC 12V
CRI 80Ra, CE, RoHS
Specifications
Voltage: 12VDC
LED Type: SMD2835
IP Grade: Non−Waterproof IP40
Operating Temperature: −20
Lifespan: 35000 hours
Base: Gray Aluminum Housing
Top Cover: Clear Lens
Ordering Information
NTE Type No. LED Color / CCT Length
69−LL−15 White (6000K) 11.81 (300mm) 24LEDs 3W 9 Max
69−LL−16 Warm White (3000K) 11.81 (300mm) 24LEDs 3W 9 Max
69−LL−17 White (6000K) 19.68 (500mm) 39LEDs 5W 5 Max
69−LL−18 Warm White (3000K) 19.68 (500mm) 39LEDs 5W 5 Max
69−LL−19 White (6000K) 31.49 (800mm) 63LEDs 8W 3 Max
69−LL−20 Warm White (3000K) 31.49 (800mm) 63LEDs 8W 3 Max
69−LL−21 White (6000K) 39.37 (1000mm) 78LEDs 12W 2 Max
69−LL−22 Warm White (3000K) 39.37 (1000mm) 78LEDs 12W 2 Max
to +45 C
Power
Consumption
Number of LED Bars
Connected in Series
Operating Instructions
These LED Light Bars can be operated in either a stable bright mode or in a dimmable mode, depending on which end of the LED Light Bar the
power supply is connected. To operate in dimmable mode, connect the power supply to the end of the Light Bar where the circuit board is visible.
For stable bright mode, connect the power supply to the end opposite the visible circuit board.
LED Light Bars may be connected together using either a straight (69−LLA−02) or 90
multiple LED Light Bars, you must calculate and choose the appropriate power supply according to the power required. Minimum power supply should
be more than 20% of the total power required.
The absolute maximum value for connecting multiple Light Bars together is 36W, 3A. However, you WILL NOT achieve full brightness at 36W. The
ideal, recommended wattage should not exceed 29W for 100% brightness.
(69−LLA−03) bar−to−bar connector. However, when connecting
Accessories
NTE Type No. Description
69−LLA−01 LED Bar DC Connector, Male−to−Male, Black, 7.08” (18cm)
69−LLA−02 LED Connector, Bar−to−Bar, Black
69−LLA−03
LED Connector, 90 Angle, Bar−to−Bar, Black
Dimensions
Dimmable End
(Circuit visible)
Power Jack
.457 (11.6)
Non−Dimmable End
.984
(25.0)
L − 11.81 (300.0), 39.37 (1000.0)
15
Loading...