Page 1
T-1 3/4 (5mm) SOLID STATE LAMP
Part Number: L-53SYDK Super Bright Yellow
Features
z Low power consumption.
z Popular T-1 3/4 diameter package.
z General purpose leads.
z Reliable and rugged.
z Long life - solid state reliability.
z Available on tape and reel.
z RoHS compliant.
Package Dimensions
Description
The Super Bright Yellow device is made with AlGaInP (on
GaAs substrate) light emitting diode chip.
Notes:
1. All dimensions are in millimeters (inches).
2. Tolerance is ±0.25(0.01") unless otherwise noted.
3. Lead spacing is measured where the leads emerge from the package.
4. The specifications, characteristics and technical data described in the datasheet are subject to change without prior notice.
SPEC NO: DSAA8411 REV NO: V.10 DATE: MAY/26/2011 PAGE: 1 OF 6
APPROVED: WYNEC CHECKED: Allen Liu DRAWN: C.H.Han
Page 2
Selection Guide
V
Iv (mcd) [2]
Part No. Dice Lens Type
@ 20mA
Min. Typ. 2θ1/2
L-53SYDK Super Bright Yellow (AlGaInP) Yellow Diffused 600 1000
Notes:
1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 of the optical peak value.
2. Luminous intensity/ luminous Flux: +/-15%.
iewing
Angle [1]
60
°
Electrical / Optical Characteristics at TA=25°C
Symbol Parameter Device Typ. Max. Units Test Conditions
λpeak Peak Wavelength Super Bright Yellow 590 nm I
λD [1] Dominant Wavelength Super Bright Yellow 590 nm I
Δλ1/2 Spectral Line Half-width Super Bright Yellow 20 nm I
C Capacitance Super Bright Yellow 20 pF V
V
F [2] Forward Voltage Super Bright Yellow 2 2.5 V IF=20mA
R Reverse Current Super Bright Yellow 10 uA VR = 5V
I
Notes:
1.Wavelength: +/-1nm.
2. Forward Voltage: +/-0.1V.
F=20mA
F=20mA
F=20mA
F=0V;f=1MHz
Absolute Maximum Ratings at TA=25°C
Parameter Super Bright Yellow Units
Power dissipation 75 mW
DC Forward Current 30 mA
Peak Forward Current [1] 175 mA
Reverse Voltage 5 V
Operating/Storage Temperature -40°C To +85°C
Lead Solder Temperature [2] 260°C For 3 Seconds
Lead Solder Temperature [3] 260°C For 5 Seconds
Notes:
1. 1/10 Duty Cycle, 0.1ms Pulse Width.
2. 2mm below package base.
3. 5mm below package base.
SPEC NO: DSAA8411 REV NO: V.10 DATE: MAY/26/2011 PAGE: 2 OF 6
APPROVED: WYNEC CHECKED: Allen Liu DRAWN: C.H.Han
Page 3
Super Bright Yellow L-53SYDK
SPEC NO: DSAA8411 REV NO: V.10 DATE: MAY/26/2011 PAGE: 3 OF 6
APPROVED: WYNEC CHECKED: Allen Liu DRAWN: C.H.Han
Page 4
PACKING & LABEL SPECIFICATIONS L-53SYDK
SPEC NO: DSAA8411 REV NO: V.10 DATE: MAY/26/2011 PAGE: 4 OF 6
APPROVED: WYNEC CHECKED: Allen Liu DRAWN: C.H.Han
Page 5
SPEC NO: DSAA8411 REV NO: V.10 DATE: MAY/26/2011 PAGE: 5 OF 6
APPROVED: WYNEC CHECKED: Allen Liu DRAWN: C.H.Han
Page 6
SPEC NO: DSAA8411 REV NO: V.10 DATE: MAY/26/2011 PAGE: 6 OF 6
APPROVED: WYNEC CHECKED: Allen Liu DRAWN: C.H.Han
Loading...