Datasheet KYB Series Specification

(Except

Gas escape end seal

Terminal Code : E

F:471)

Voltage code (ex. 6.3V:6R3, 50V:500)

1 3 42 6 7 8 9 10 13125 18171611 1514

Please refer to "Product code guide (radial lead type)"

MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS

KYBSeries

Low impedance, high ripple and long life from KYA series

・

Newly innovative electrolyte is employed to minimize impedance

・

Endurance with ripple current : 4,000 to 10,000 hours at 105

・

Non solvent resistant type

・

RoHS2 Compliant

・

SPECIFICATIONS

◆

Items Characteristics

Category
Temperature Range

Rated Voltage Range
Capacitance Tolerance
Leakage Current

Dissipation Factor
(tanδ)

Low Temperature
Characteristics
(Max. Impedance Ratio)

Endurance

Shelf Life

-40 to +105

6.3 to 100V

±

I=0.01CV or 3µA, whichever is greater.
Where, I : Max. leakage current (µA), C : Nominal capacitance (µF), V : Rated voltage (V) (at 20℃ after 2 minutes)

Rated voltage (V
tanδ (Max.) 0.22 0.19 0.16 0.14 0.12 0.10 0.09 0.09 0.08
When nominal capacitance exceeds 1,000µF, add 0.02 to the value above for each 1,000µF increase. (at 20℃, 120Hz)
Rated voltage (Vdc) 6.3V 10V 16V 25V 35V 50V 63V 80V 100V
Z(-25℃)/Z(+20℃) 4 3 2 2 2 2 2 2 2
Z(-40℃)/Z(+20℃) 8 6 4 3 3 3 3 3 3 (at 120Hz)
The following specifications shall be satisfied when the capacitors are restored to 20℃ after subjected to DC voltage with the rated

ripple current is applied (the peak voltage shall not exceed the rated voltage) for the specified period of time at 105℃.
Rated Voltage(V
Time
Capacitance change
D.F. (tanδ)
Leakage current
The following specifications shall be satisfied when the capacitors are restored to 20℃ after exposing them for 500 hours at 105℃ without

voltage applied. Before the measurement, the capacitor shall be preconditioned by applying voltage according to Item 4.1 of JIS C 5101-4.
Capacitance change
D.F. (tanδ)
Leakage current

℃

dc

20% (M) (at 20℃, 120Hz)

) 6.3V 10V 16V 25V 35V 50V 63V 80V 100V

dc

) 6.3 to 10V

dc

5: 4,000hours φ6.3 & 8: 6,000hours φ10 to 18: 8,000hoursφ5: 5,000hours φ6.3 & 8: 7,000hours φ10 to 18: 10,000hours

φ

30% of the initial value

≦±

200% of the initial specified value

≦

The initial specified value

≦

25% of the initial value

≦±

200% of the initial specified value

≦

The initial specified value

≦

℃

dc

Low impedance, 105℃

KYB

Lower Z

KYA

16 to 100V

≦±
≦
≦

dc

25% of the initial value
200% of the initial specified value
The initial specified value

DIMENSIONS [mm]

◆

●

Sleeve (PET : Brown)

φD'

Vent

φ5 &φ6.3)

PART NUMBERING SYSTEM

◆

E K Y B E M

φd

L' 15min. 4min.

Capacitance code (ex. 6.8µF:6R8, 39µF:390, 470µ

F±0.5

(φ5 to φ10)

Supplement code

Capacitance tolerance code

Lead forming·taping code

Terminal code

(φ12.5 to φ18)

Size code

Series code

Category

6.3

0.5

2.5

8

0.6

0.6

5.0

3.5

φD+0.5max.

L+1.5max.

0.6

5.0

5

F±0.5

φD
φd

φD'

L'

0.5

2.0

F

10

12.5

0.8

7.5

18

16

0.8

7.5

Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications.

CAT. No. E1001Y 2024

MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS

KYBSeries

STANDARD RATINGS

◆

℃

Rated
ripple

current

(mArms/

105℃,

100kHz)

EKYB6R3E□□181ME11D
EKYB6R3E□□391MF11D
EKYB6R3E□□821MHB5D
EKYB6R3E□□122MH15D
EKYB6R3E□□122MJC5S
EKYB6R3E□□152MH20D
EKYB6R3E□□182MJ16S
EKYB6R3E□□222MJ20S
EKYB6R3E□□272MJ25S
EKYB6R3E□□332MJ30S
EKYB6R3E□□392MK20S
EKYB6R3E□□472MK25S
EKYB6R3E□□682MK30S
EKYB6R3E□□682ML20S
EKYB6R3E□□822MK35S
EKYB6R3E□□822MM20S
EKYB6R3E□□103MK40S
EKYB6R3E□□103ML25S
EKYB6R3E□□123MLN3S
EKYB6R3E□□123MM25S
EKYB6R3E□□153MLP1S
EKYB6R3E□□153MMN3S
EKYB6R3E□□183ML40S
EKYB6R3E□□183MMP1S
EKYB6R3E□□223MM40S
EKYB100E□□121ME11D
EKYB100E□□331MF11D
EKYB100E□□561MHB5D
EKYB100E□□821MH15D
EKYB100E□□102MH20D
EKYB100E□□102MJC5S
EKYB100E□□122MJ16S
EKYB100E□□182MJ20S
EKYB100E□□222MJ25S
EKYB100E□□272MJ30S
EKYB100E□□272MK20S
EKYB100E□□392MK25S
EKYB100E□□472MK30S
EKYB100E□□472ML20S
EKYB100E□□562MK35S
EKYB100E□□682MK40S
EKYB100E□□682ML25S
EKYB100E□□682MM20S
EKYB100E□□822MLN3S
EKYB100E□□822MM25S
EKYB100E□□103MLP1S
EKYB100E□□103MMN3S
EKYB100E□□123ML40S
EKYB100E□□123MMP1S
EKYB100E□□153MM40S
EKYB160E□□121ME11D
EKYB160E□□271MF11D
EKYB160E□□471MHB5D
EKYB160E□□681MH15D
EKYB160E□□681MJC5S
EKYB160E□□821MH20D
EKYB160E□□102MJ16S
EKYB160E□□152MJ20S
EKYB160E□□182MJ25S
EKYB160E□□222MJ30S
EKYB160E□□222MK20S
EKYB160E□□332MK25S
EKYB160E□□392MK30S
EKYB160E□□392ML20S

is scheduled to be discontinued.

Impedance

WV

Cap

(Vdc)

6.3

10,000 12.5×40 0.017 0.068 3,640
10,000 16×25 0.020 0.080 3,140
12,000 16×31.5 0.016 0.064 3,610
12,000 18×25 0.017 0.068 3,530
15,000 16×35.5 0.014 0.056 4,080
15,000 18×31.5 0.014 0.056 4,220
18,000 16×40 0.013 0.052 4,220
18,000 18×35.5 0.012 0.048 4,280
22,000 18×40 0.011 0.044 4,700

10

10,000 16×35.5 0.014 0.056 4,080
10,000 18×31.5 0.014 0.056 4,220
12,000 16×40 0.013 0.052 4,220
12,000 18×35.5 0.012 0.048 4,280
15,000 18×40 0.011 0.044 4,700

16

Case size

(µF)

φD×

180 5×11 0.29 1.2 340
390 6.3×11 0.15 0.60 540

820 8×11.5 0.087 0.35 840
1,200 8×15 0.069 0.28 1,050
1,200 10×12.5 0.064 0.26 1,050
1,500 8×20 0.060 0.24 1,210
1,800 10×16 0.049 0.20 1,400
2,200 10×20 0.037 0.15 1,650
2,700 10×25 0.031 0.13 1,910
3,300 10×30 0.027 0.11 2,230
3,900 12.5×20 0.027 0.11 2,230
4,700 12.5×25 0.024 0.096 2,530
6,800 12.5×30 0.021 0.084 2,860
6,800 16×20 0.025 0.10 2,610
8,200 12.5×35 0.018 0.072 3,140
8,200 18×20 0.021 0.084 3,000

120 5×11 0.29 1.2 340

330 6.3×11 0.15 0.60 540

560 8×11.5 0.087 0.35 840

820 8×15 0.069 0.28 1,050
1,000 8×20 0.060 0.24 1,210
1,000 10×12.5 0.064 0.26 1,050
1,200 10×16 0.049 0.20 1,400
1,800 10×20 0.037 0.15 1,650
2,200 10×25 0.031 0.13 1,910
2,700 10×30 0.027 0.11 2,230
2,700 12.5×20 0.027 0.11 2,230
3,900 12.5×25 0.024 0.096 2,530
4,700 12.5×30 0.021 0.084 2,860
4,700 16×20 0.025 0.10 2,610
5,600 12.5×35 0.018 0.072 3,140
6,800 12.5×40 0.017 0.068 3,640
6,800 16×25 0.020 0.080 3,140
6,800 18×20 0.021 0.084 3,000
8,200 16×31.5 0.016 0.064 3,610
8,200 18×25 0.017 0.068 3,530

120 5×11 0.29 1.2 340

270 6.3×11 0.15 0.60 540

470 8×11.5 0.087 0.35 840

680 8×15 0.069 0.28 1,050

680 10×12.5 0.064 0.26 1,050

820 8×20 0.060 0.24 1,210
1,000 10×16 0.049 0.20 1,400
1,500 10×20 0.037 0.15 1,650
1,800 10×25 0.031 0.13 1,910
2,200 10×30 0.027 0.11 2,230
2,200 12.5×20 0.027 0.11 2,230
3,300 12.5×25 0.024 0.096 2,530
3,900 12.5×30 0.021 0.084 2,860
3,900 16×20 0.025 0.10 2,610

(Ω max./100kHz)

L(mm)

20℃-10

□□ : Enter the appropriate lead forming or taping code.
Production of the products shown in

Part No.

Impedance

WV

Cap

(Vdc)

16

25

35

50

Case size

(µF)

φD×

4,700 12.5×35 0.018 0.072 3,140
4,700 18×20 0.021 0.084 3,000
5,600 12.5×40 0.017 0.068 3,640
5,600 16×25 0.020 0.080 3,140
6,800 16×31.5 0.016 0.064 3,610
6,800 18×25 0.017 0.068 3,530
8,200 16×35.5 0.014 0.056 4,080

8,200 18×31.5 0.014 0.056 4,220
10,000 16×40 0.013 0.052 4,220
10,000 18×35.5 0.012 0.048 4,280
12,000 18×40 0.011 0.044 4,700

82 5×11 0.29 1.2 340
150 6.3×11 0.15 0.60 540
330 8×11.5 0.087 0.35 840
390 8×15 0.069 0.28 1,050
470 10×12.5 0.064 0.26 1,050
560 8×20 0.060 0.24 1,210
680 10×16 0.049 0.20 1,400

1,000 10×20 0.037 0.15 1,650
1,200 10×25 0.031 0.13 1,910
1,500 10×30 0.027 0.11 2,230
1,500 12.5×20 0.027 0.11 2,230
2,200 12.5×25 0.024 0.096 2,530
2,700 12.5×30 0.021 0.084 2,860
2,700 16×20 0.025 0.10 2,610
3,300 12.5×35 0.018 0.072 3,140
3,300 18×20 0.021 0.084 3,000
3,900 12.5×40 0.017 0.068 3,640
3,900 16×25 0.020 0.080 3,140
4,700 16×31.5 0.016 0.064 3,610
4,700 18×25 0.017 0.068 3,530
5,600 16×35.5 0.014 0.056 4,080
6,800 16×40 0.013 0.052 4,220
6,800 18×31.5 0.014 0.056 4,220
8,200 18×35.5 0.012 0.048 4,280

47 5×11 0.29 1.2 340
100 6.3×11 0.15 0.60 540
180 8×11.5 0.087 0.35 840
270 8×15 0.069 0.28 1,050
330 8×20 0.060 0.24 1,210
330 10×12.5 0.064 0.26 1,050
470 10×16 0.049 0.20 1,400
680 10×20 0.037 0.15 1,650
820 10×25 0.031 0.13 1,910

1,000 10×30 0.027 0.11 2,230
1,000 12.5×20 0.027 0.11 2,230
1,500 12.5×25 0.024 0.096 2,530
1,800 12.5×30 0.021 0.084 2,860
1,800 16×20 0.025 0.10 2,610
2,200 12.5×35 0.018 0.072 3,140
2,200 18×20 0.021 0.084 3,000
2,700 12.5×40 0.017 0.068 3,640
2,700 16×25 0.020 0.080 3,140
3,300 16×31.5 0.016 0.064 3,610
3,300 18×25 0.017 0.068 3,530
3,900 16×35.5 0.014 0.056 4,080
4,700 16×40 0.013 0.052 4,220
4,700 18×31.5 0.014 0.056 4,220
5,600 18×35.5 0.012 0.048 4,280

27 5×11 0.48 2.0 238

56 6.3×11 0.20 0.80 385
100 8×11.5 0.12 0.48 620
150 8×15 0.093 0.38 810
150 10×12.5 0.10 0.40 810

(Ω max./100kHz)

L(mm)

20℃-10

Low impedance, 105℃

Rated
ripple

current

(mArms/

105℃,

℃

100kHz)

EKYB160E□□472MK35S
EKYB160E□□472MM20S
EKYB160E□□562MK40S
EKYB160E□□562ML25S
EKYB160E□□682MLN3S
EKYB160E□□682MM25S
EKYB160E□□822MLP1S
EKYB160E□□822MMN3S
EKYB160E□□103ML40S
EKYB160E□□103MMP1S
EKYB160E□□123MM40S
EKYB250E□□820ME11D
EKYB250E□□151MF11D
EKYB250E□□331MHB5D
EKYB250E□□391MH15D
EKYB250E□□471MJC5S
EKYB250E□□561MH20D
EKYB250E□□681MJ16S
EKYB250E□□102MJ20S
EKYB250E□□122MJ25S
EKYB250E□□152MJ30S
EKYB250E□□152MK20S
EKYB250E□□222MK25S
EKYB250E□□272MK30S
EKYB250E□□272ML20S
EKYB250E□□332MK35S
EKYB250E□□332MM20S
EKYB250E□□392MK40S
EKYB250E□□392ML25S
EKYB250E□□472MLN3S
EKYB250E□□472MM25S
EKYB250E□□562MLP1S
EKYB250E□□682ML40S
EKYB250E□□682MMN3S
EKYB250E□□822MMP1S
EKYB350E□□470ME11D
EKYB350E□□101MF11D
EKYB350E□□181MHB5D
EKYB350E□□271MH15D
EKYB350E□□331MH20D
EKYB350E□□331MJC5S
EKYB350E□□471MJ16S
EKYB350E□□681MJ20S
EKYB350E□□821MJ25S
EKYB350E□□102MJ30S
EKYB350E□□102MK20S
EKYB350E□□152MK25S
EKYB350E□□182MK30S
EKYB350E□□182ML20S
EKYB350E□□222MK35S
EKYB350E□□222MM20S
EKYB350E□□272MK40S
EKYB350E□□272ML25S
EKYB350E□□332MLN3S
EKYB350E□□332MM25S
EKYB350E□□392MLP1S
EKYB350E□□472ML40S
EKYB350E□□472MMN3S
EKYB350E□□562MMP1S
EKYB500E□□270ME11D
EKYB500E□□560MF11D
EKYB500E□□101MHB5D
EKYB500E□□151MH15D
EKYB500E□□151MJC5S

Part No.

Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications.

CAT. No. E1001Y 2024

MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS

KYBSeries

STANDARD RATINGS

◆

℃

Rated
ripple

current

(mArms/

105℃,

100kHz)

EKYB500E□□181MH20D
EKYB500E□□221MJ16S
EKYB500E□□271MJ20S
EKYB500E□□391MJ25S
EKYB500E□□471MJ30S
EKYB500E□□471MK20S
EKYB500E□□681MK25S
EKYB500E□□821MK30S
EKYB500E□□821ML20S
EKYB500E□□102MK35S
EKYB500E□□102MM20S
EKYB500E□□122MK40S
EKYB500E□□122ML25S
EKYB500E□□152MLN3S
EKYB500E□□152MM25S
EKYB500E□□182MLP1S
EKYB500E□□222ML40S
EKYB500E□□222MMN3S
EKYB500E□□272MMP1S
EKYB630E□□180ME11D
EKYB630E□□330MF11D
EKYB630E□□560MHB5D
EKYB630E□□820MH15D
EKYB630E□□121MH20D
EKYB630E□□121MJC5S
EKYB630E□□181MJ16S
EKYB630E□□221MJ20S
EKYB630E□□331MJ25S
EKYB630E□□391MJ30S
EKYB630E□□391MK20S
EKYB630E□□561MK25S
EKYB630E□□681MK30S
EKYB630E□□681ML20S
EKYB630E□□821MK35S
EKYB630E□□821MM20S
EKYB630E□□102MK40S
EKYB630E□□102ML25S
EKYB630E□□122MLN3S
EKYB630E□□122MM25S
EKYB630E□□152MLP1S
EKYB630E□□152MMN3S
EKYB630E□□182ML40S
EKYB630E□□182MMP1S
EKYB630E□□222MM40S
EKYB800E□□120ME11D
EKYB800E□□220MF11D
EKYB800E□□390MHB5D

is scheduled to be discontinued.

Impedance

WV

Cap

(Vdc)

50

63

80

Case size

(µF)

φD×

180 8×20 0.075 0.30 980
220 10×16 0.069 0.28 1,100
270 10×20 0.055 0.22 1,300
390 10×25 0.043 0.18 1,600
470 10×30 0.038 0.16 1,820
470 12.5×20 0.034 0.14 1,820
680 12.5×25 0.030 0.12 2,100
820 12.5×30 0.025 0.10 2,450

820 16×20 0.028 0.12 2,350
1,000 12.5×35 0.021 0.084 2,800
1,000 18×20 0.025 0.10 2,600
1,200 12.5×40 0.019 0.076 3,100
1,200 16×25 0.024 0.096 2,750
1,500 16×31.5 0.019 0.076 3,150
1,500 18×25 0.021 0.084 2,890
1,800 16×35.5 0.016 0.064 3,550
2,200 16×40 0.014 0.056 3,900
2,200 18×31.5 0.014 0.056 3,800
2,700 18×35.5 0.013 0.052 4,100

18 5×11 0.50 2.0 220
33 6.3×11 0.25 1.0 350
56 8×11.5 0.16 0.64 530

82 8×15 0.12 0.48 700
120 8×20 0.085 0.34 880
120 10×12.5 0.11 0.44 725
180 10×16 0.073 0.30 1,050
220 10×20 0.055 0.22 1,300
330 10×25 0.045 0.18 1,550
390 10×30 0.040 0.16 1,780
390 12.5×20 0.036 0.15 1,780
560 12.5×25 0.030 0.12 2,100
680 12.5×30 0.026 0.11 2,415
680 16×20 0.028 0.12 2,250
820 12.5×35 0.022 0.088 2,700
820 18×20 0.028 0.12 2,500

1,000 12.5×40 0.020 0.080 3,000
1,000 16×25 0.025 0.10 2,730
1,200 16×31.5 0.020 0.080 3,000
1,200 18×25 0.022 0.088 2,800
1,500 16×35.5 0.018 0.072 3,200
1,500 18×31.5 0.018 0.072 3,300
1,800 16×40 0.016 0.064 3,590
1,800 18×35.5 0.017 0.068 3,570
2,200 18×40 0.016 0.064 3,670

12 5×11 0.80 3.2 163

22 6.3×11 0.43 1.8 267

39 8×11.5 0.18 0.72 462

(Ω max./100kHz)

L(mm)

20℃-10

□□ : Enter the appropriate lead forming or taping code.
Production of the products shown in

Part No.

Impedance

WV

Cap

(Vdc)

80

1,000 16×35.5 0.020 0.080 2,600
1,200 16×40 0.018 0.072 2,900
1,200 18×31.5 0.020 0.080 2,550
1,500 18×35.5 0.018 0.072 3,050

100

1,000 18×40 0.017 0.068 3,510

Case size

(µF)

φD×

56 8×15 0.14 0.56 585
82 8×20 0.11 0.44 735

82 10×12.5 0.14 0.56 624
120 10×16 0.10 0.40 780
180 10×20 0.075 0.30 1,040
220 10×25 0.060 0.24 1,170
270 10×30 0.053 0.22 1,350
270 12.5×20 0.048 0.20 1,430
390 12.5×25 0.039 0.16 1,620
470 12.5×30 0.033 0.14 1,950
470 16×20 0.036 0.15 1,750
560 12.5×35 0.026 0.11 2,250
560 18×20 0.032 0.13 2,100
680 12.5×40 0.024 0.096 2,450
680 16×25 0.028 0.12 2,250
820 16×31.5 0.022 0.088 2,400
820 18×25 0.027 0.11 2,270

6.8 5×11 0.80 3.2 163
15 6.3×11 0.43 1.8 267
27 8×11.5 0.18 0.72 462
39 8×15 0.14 0.56 585
56 8×20 0.11 0.44 735
56 10×12.5 0.14 0.56 624
82 10×16 0.10 0.40 780

100 10×20 0.075 0.30 1,040
120 10×25 0.060 0.24 1,170
150 10×30 0.053 0.22 1,350
180 12.5×20 0.048 0.20 1,430
220 12.5×25 0.039 0.16 1,620
270 12.5×30 0.033 0.14 1,950
270 16×20 0.036 0.15 1,750
330 16×25 0.028 0.12 2,250
390 12.5×35 0.026 0.11 2,250
390 18×20 0.032 0.13 2,100
470 12.5×40 0.024 0.096 2,450
470 16×31.5 0.022 0.088 2,400
560 16×35.5 0.020 0.080 2,600
560 18×25 0.027 0.11 2,270
680 16×40 0.018 0.072 2,900
680 18×31.5 0.020 0.080 2,550
820 18×35.5 0.018 0.072 3,050

(Ω max./100kHz)

L(mm)

20℃-10

Low impedance, 105℃

Rated
ripple

current

(mArms/

105℃,

℃

100kHz)

EKYB800E□□560MH15D
EKYB800E□□820MH20D
EKYB800E□□820MJC5S
EKYB800E□□121MJ16S
EKYB800E□□181MJ20S
EKYB800E□□221MJ25S
EKYB800E□□271MJ30S
EKYB800E□□271MK20S
EKYB800E□□391MK25S
EKYB800E□□471MK30S
EKYB800E□□471ML20S
EKYB800E□□561MK35S
EKYB800E□□561MM20S
EKYB800E□□681MK40S
EKYB800E□□681ML25S
EKYB800E□□821MLN3S
EKYB800E□□821MM25S
EKYB800E□□102MLP1S
EKYB800E□□122ML40S
EKYB800E□□122MMN3S
EKYB800E□□152MMP1S
EKYB101E□□6R8ME11D
EKYB101E□□150MF11D
EKYB101E□□270MHB5D
EKYB101E□□390MH15D
EKYB101E□□560MH20D
EKYB101E□□560MJC5S
EKYB101E□□820MJ16S
EKYB101E□□101MJ20S
EKYB101E□□121MJ25S
EKYB101E□□151MJ30S
EKYB101E□□181MK20S
EKYB101E□□221MK25S
EKYB101E□□271MK30S
EKYB101E□□271ML20S
EKYB101E□□331ML25S
EKYB101E□□391MK35S
EKYB101E□□391MM20S
EKYB101E□□471MK40S
EKYB101E□□471MLN3S
EKYB101E□□561MLP1S
EKYB101E□□561MM25S
EKYB101E□□681ML40S
EKYB101E□□681MMN3S
EKYB101E□□821MMP1S
EKYB101E□□102MM40S

Part No.

RATED RIPPLE CURRENT MULTIPLIERS

◆

Frequency Multipliers

・

Capacitance(µF)

2,200 to 3,900 0.75 0.90 0.95 1.00
4,700 to 0.85 0.95 0.98 1.00

Frequency(Hz)

6.8 to 180 0.40 0.75 0.90 1.00
220 to 560 0.50 0.85 0.94 1.00
680 to 1,800 0.60 0.87 0.95 1.00

120 1k 10k 100k

The deterioration of aluminum electrolytic capacitors accelerates their life due to the internal heating produced by ripple current. For details, refer
to Section "5-3 Ripple Current Effect on Lifetime" in the catalog, Technical Note.

Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications.

CAT. No. E1001Y 2024

ALUMINUM ELECTROLYTIC CAPACITORS

Always read "Notes on Use" before using the product in order to enable you to use the product correctly and prevent any faults

■

and accidents from occurring.

Request the Product Specification on the product of NIPPON CHEMI-CON CORPORATION to refer to it as well as this brochure

■

prior to the order of the products. Some specific notes on use of the ordered product may be described in the specifications.

The products listed in this catalog are designed and manufactured for general electronics equipment use and are not intended for

■

use in applications that can adversely affect human life; where the malfunction of equipment may cause damage to life or
property. In addition, our products are not intended to be used in specific applications that may cause a major social impact.
Please consult with us in advance of usage of our products in the following listed applications. ① Aerospace equipment ② Power
generation equipment such as thermal power, nuclear power etc. ③ Medical equipment ④ Transport equipment (automobiles,
trains, ships, etc.) ⑤ Transportation control equipment ⑥ Disaster prevention / crime prevention equipment ⑦ Highly publicized
information processing equipment ⑧ Submarine equipment ⑨ Other applications that are not considered general-purpose
applications.

The circuits described as examples in this catalog and the "delivery specifications" are featured in order to show the operations

■

and usage of our products, however, this fact does not guarantee that the circuits are available to function in your equipment
systems. We are not in any case responsible for any failures or damage caused by the use of information contained herein. You
should examine our products, of which the characteristics are described in the "delivery specifications" and other documents, and
determine whether or not our products suit your requirements according to the specifications of your equipment systems.
Therefore, you bear final responsibility regarding the use of our products.

Please make sure that you take appropriate safety measures such as use of redundant design and malfunction prevention

measures in order to prevent fatal accidents and/or fires in the event any of our products malfunction.

We strongly recommend our customers to purchase Nippon Chemi-Con products only through our official sales channels. We

■

assume no responsibility for any defects or damages caused by using products purchased from outside our official sales channel
or of counterfeit goods. In addition, we will ask the customer to pay the investigation cost for products purchased outside our
official sales channel.

Product Guide

We reserve the right to discontinue production and delivery of products. We do not guarantee that all the products included in this

■

catalog will be available in the future.

The aforementioned does not apply in the case of individual agreements deviating from the foregoing for customer-specific

products

We continually strive to improve the quality and reliability of our products, but in any case that our product does not meet our

■

published specifications, please stop using it promptly and contact us immediately. As for compensation for non-conforming
goods delivered by Chemi-Con, we will limit it only to goods found in non-compliance of our published specifications. This may be
accomplished by a no cost replacement of non-conforming individual products, a credit of the piece price paid per each individual
non-conforming product, or in other ways deemed necessary.

In addition, we have an established system with enhanced traceability, therefore we will limit the applicable lot items for any

potential compensation.

Part Numbering System
Part Numbering System (Appendix)
Standardization
Available Items by Manufacturing Locations
Environmental Measures
Technical Note
Precautions and Guidelines
Recommended Soldering Conditions
Taping, Lead-preforming and Packaging
Available Terminals for Snap-in and Screw Mount Type

Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications.

CAT. No. E1001Y 2024