
Vishay High Power Products
Single Phase Rectifier Bridge, 8 A
FEATURES
• Suitable for printed circuit board or chasis
mounting
• Compact construction
• High surge current capability
• Fully characterised data
KBPC8 Series
RoHS
COMPLIANT
D-72
• Wide temperature range
• RoHS compliant
DESCRIPTION
PRODUCT SUMMARY
I
O(av)
V
RRM
8.0 A
50 to 1000 V
The KBPC series of single phase rectifier bridge consists of
four silicon junctions connected as a full bridge. These
device are intended for general use in industrial and
consumer equipment.
MAJOR RATINGS AND CHARACTERISTICS
SYMBOL CHARACTERISTICS VALUES UNITS
I
O
I
FSM
2
I
V
T
t
RRM
J
TC = 50 °C, resistive load 8
T
= 50 °C, capacitive load 6.4
C
50 Hz 125
60 Hz 137
50 Hz 110
60 Hz 100
Range 50 to 1000 V
- 55 to 150 °C
ELECTRICAL SPECIFICATIONS
A
A
A2s
VOLTAGE RATINGS
V
, MAXIMUM REPETITIVE
PART NUMBER
KBPC8005 50 80
KBPC801 100 150
KBPC802 200 300
KBPC804 400 500
KBPC806 600 700
KBPC808 800 900
KBPC810 1000 1100
Document Number: 93586 For technical questions, contact: ind-modules@vishay.com
Revision: 29-Sep-08 1
RRM
PEAK REVERSE VOLTAGE
V
V
, MAXIMUM NON-REPETITIVE
RSM
PEAK REVERSE VOLTAGE
V
www.vishay.com

KBPC8 Series
Vishay High Power Products
Single Phase Rectifier
Bridge, 8 A
FORWARD CONDUCTION
PARAMETER SYMBOL TEST CONDITIONS VALUES UNITS
Maximum DC output current I
Maximum peak one cycle,
non-repetitive surge current
2
Maximum I
Maximum I
t capability for fusing I2t
2
√t capability for fusing I2√t t = 0.1 to 10 ms, no voltage reapplied 1105 A2√s
Maximum peak forward voltage per diode V
Typical peak reverse leakage per diode I
I
FSM
O
FM
RM
Operating frequency range f 400 to 1000 Hz
Maximum repetitive peak reverse
voltage range
V
RRM
TC = 50 °C, resistive or inductive load 8.0
T
= 50 °C, capacitive load 6.4
C
t = 10 ms, 20 ms
Following any rated load
125
condition and with rated
t = 8.3 ms, 16.7 ms 137
t = 10 ms
t = 8.3 ms 71
t = 10 ms 110
V
reapllied
RRM
Initial T
100 % V
= TJ maximum
J
reapplied
RRM
78
t = 8.3 ms 1000
IFM = 3.0 A, TJ = 25 °C 1.0 V
TJ = 25 °C, 100 % V
T
= 150 °C, 100 % V
J
RRM
RRM
10
100
50 to 1000 V
A
A
mA
2
s
THERMAL AND MECHANICAL SPECIFICATIONS
PARAMETER SYMBOL VALUES UNITS
Operating and storage temperature range T
Thermal resistance, junction to case R
Approximate weight
10
9
8
7
6
5
4
3
2
Aver age Output Current (A)
1
0
0
Capacitive load
20 40 60 80 100 120 140 160
KBPC8...
Resistive load
Maximum Allowable Ambient
Temperature (°C)
Fig. 1 - Current Ratings Fig. 2 - Non-Repetitive Surge Ratings
, T
J
Stg
thJC
- 55 to 150 °C
6K/W
6g
0.21 oz.
140
130
120
110
100
90
80
70
60
50
40
30
20
10
Maximum Peak Surge Current (A)
0
0.01
0.1
KBPC8
50 Hz
1.0
Pulse Train Duration (s)
10
LINKS TO RELATED DOCUMENTS
Dimensions http://www.vishay.com/doc?95250
www.vishay.com For technical questions, contact: ind-modules@vishay.com
Document Number: 93586
2 Revision: 29-Sep-08

DIMENSIONS in millimeters (inches)
+
~
~
Ø 3.80 (Ø 0.150)
15.75 (0.620)
14.75 (0.580)
15.75 (0.620)
14.75 (0.580)
10.8 (0.425)
10.0 (0.394)
5.33 (0.210)
4.33 (0.170)
25.4 (1.000)
MIN.
Ø 1.10 (Ø 0.043)
Ø 0.90 (Ø 0.035)
10.8 (0.425)
10.0 (0.394)
Outline Dimensions
Vishay Semiconductors
D-72
Document Number: 95250 For technical questions, contact: indmodules@vishay.com
Revision: 23-Nov-07 1
www.vishay.com

Legal Disclaimer Notice
www.vishay.com
Vishay
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular
product with the properties described in the product specification is suitable for use in a particular application. Parameters
provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All
operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please
contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
Material Category Policy
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the
definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council
of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment
(EEE) - recast, unless otherwise specified as non-compliant.
Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that
all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU.
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free
requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference
to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21
conform to JEDEC JS709A standards.
Revision: 02-Oct-12
1
Document Number: 91000