Page 1
KBP005M/3N246 - KBP10M/3N252
KBP005M/3N246-KBP10M/3N252, Rev. A
KBP005M/3N246 - KBP10M/3N252
1.5 Ampere Bridge Rectifiers
Absolute Maximum Ratings* T
A
= 25°C unless otherwise noted
*These ratings are limiting values above which the serviceability of any semiconductor device may be impaired.
**Device mounted on PCB with 0.47 x 0.47" (12 x 12 mm).
Electrical Characteristics T
A
= 25°C unless otherwise noted
ã1998 Fairchild Semiconductor Corporation
Features
• Surge overload rating: 50 amperes
peak.
• Reliable low cost construction utilizing
molded plastic technique.
Parameter Device Units
005M 01M 02M 04M 06M 08M 10M
246 247 248 249 250 251 252
Peak Repetitive Reverse Voltage 50 100 200 400 600 800 1000 V
Maximum RMS Bridge Input Voltage 35 70 140 280 420 560 700 V
DC Reverse Voltage (Rated VR)
50 100 200 400 600 800 1000 V
Maximum Reverse Leakage,
total bridge @ rated VRTA = 25°C
TA = 100°C
5.0
500
mA
mA
Maximum Forward Voltage Drop,
per bridge @ 1.0 A
@ 3.14 A
1.0
1.3
V
V
I2t rating for fusing t < 8.35 ms 10 A2Sec
Typical Junction Capacitance, per leg
V
R
= 4.0 V, f = 1.0 MHz
15 pF
Symbol Paramete
r Value Units
I
O
Average Rectified Current
@ T
A
= 50°C
1.5 A
i
f(surge)
Peak
Forward Surge Current 50 A
P
D
Total Device Dissipation
Derate above 25°C
3.5
25
W
mW/°C
R
q
JA
Thermal Resistance, Junction to Ambient,** per leg 40
°C/W
T
stg
Storage Temperature Range -55 to +165
°C
T
J
Operating Junction Temperature -55 to +165
°C
KBPM
0.460 (11.7)
0.420 (10.7)
0.
600 (15.2)
0.560 (14.
3)
0.600 Min
(15.2)
0.500 (12.7)
0.460 (11.7)
0.500 Min
(1
2.7)
0.160 (4.1)
0.140 (3.6)
0.034 (8.6)
0.028 (7.6)
0.060
Typ
(1.52)
0.125 X 4
5
O
(3.2) Typ
Dimensions are in: inches (mm)
+
~ ~
-
Page 2
T ypical Characteristics
KBP005M/3N246 - KBP10M/3N252
Bridge Rectifiers
(continued)
Output Cur r e n t vs.
Ambient Temperature
2
1.5
1
0.5
OUTPUT CURRENT (A)
0
0 50 100 150
AMBIENT TEMPERATURE ( C)
º
Reverse Characteris tics
100
µ
10
T = 25 C
º
1
REVERSE CURRENT ( A)
0.1
0 20406080100120140
NORM ALIZE D REVER S E VOL TAGE (%)
A
Forward Charact eristics
5
TYPICAL
1
0.1
FORWAR D CU RR E NT (A)
0.01
0 0.2 0.4 0.6 0.8 1 1.2 1.4
DISTRIBUTION
MEDIAN
FORWARD VOLTAGE (V)
Non-Repetitive Surge Current
50
40
30
20
10
FORWARD SURGE CURRENT (A)
0
12 51020 50100
NUMBER OF CYCLES AT 60Hz
KBP005M/3N246-KBP10M/3N252, Rev. A
Page 3
TRADEMARKS
The following are registered and unregistered trademarks Fairchild Semiconductor owns or is authorized to use and is
not intended to be an exhaustive list of all such trademarks.
ACEx™
CoolFET™
CROSSVOLT™
E2CMOS
TM
FACT™
FACT Quiet Series™
®
FAST
FASTr™
GTO™
HiSeC™
ISOPLANAR™
MICROWIRE™
POP™
PowerTrench™
QS™
Quiet Series™
SuperSOT™-3
SuperSOT™-6
SuperSOT™-8
TinyLogic™
DISCLAIMER
FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER
NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION OR DESIGN. FAIRCHILD
DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT
OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT
RIGHTS, NOR THE RIGHTS OF OTHERS.
LIFE SUPPORT POLICY
FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT
DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF FAIRCHILD SEMICONDUCTOR CORPORATION.
As used herein:
1. Life support devices or systems are devices or
systems which, (a) are intended for surgical implant into
the body, or (b) support or sustain life, or (c) whose
failure to perform when properly used in accordance
with instructions for use provided in the labeling, can be
reasonably expected to result in significant injury to the
user.
2. A critical component is any component of a life
support device or system whose failure to perform can
be reasonably expected to cause the failure of the life
support device or system, or to affect its safety or
effectiveness.
PRODUCT STATUS DEFINITIONS
Definition of Terms
Datasheet Identification Product Status Definition
Advance Information
Preliminary
No Identification Needed
Obsolete
Formative or
In Design
First Production
Full Production
Not In Production
This datasheet contains the design specifications for
product development. Specifications may change in
any manner without notice.
This datasheet contains preliminary data, and
supplementary data will be published at a later date.
Fairchild Semiconductor reserves the right to make
changes at any time without notice in order to improve
design.
This datasheet contains final specifications. Fairchild
Semiconductor reserves the right to make changes at
any time without notice in order to improve design.
This datasheet contains specifications on a product
that has been discontinued by Fairchild semiconductor.
The datasheet is printed for reference information only.
Loading...