Page 1
WTE
POWER SEM ICOND UCTOR S
KBJ2A – KBJ2M
Features
!
Diffused Junction
!
Low Forward Voltage Drop A
!
High Current Capability H
!
High Reliability
!
High Surge Current Capability
!
Ideal for Printed Circuit Boards
J G D
K E
Mechanical Data
!
Case: Molded Plastic
!
Terminals: Plated Leads Solderable per
MIL-STD-202, Method 208 C
!
Polarity: As Marked on Body
!
Weight: 2.0 grams (approx.)
!
Mounting Position: Any
!
Marking: Type Number
L
M
B
P P P
2.0A BRIDGE RECTIFIER
KBJ-2
Dim Min Max
A
19.7 20.3
B
10.7 11.3
C
D
E
G
H
J
K
L
M
P
All Dimensions in mm
3.8 —
13.0 14.0
2.3 2.7
1.65 —
3.17 x 45°
2.3 2.7
0.9 1.14
0.8 1.2
—0.51
4.8 5.3
Maximum Ratings and Electrical Characteristics
Single Phase, half wave, 60Hz, resistive or inductive load.
For capacitive load, derate current by 20%.
Characteristic Symbol KBJ2A KBJ2B KBJ2D KBJ2G KBJ2J KBJ2K KBJ2M Unit
Peak Repetitive Reverse Voltage
Working Peak Reverse Voltage
DC Blocking Voltage
RMS Reverse Voltage V
Average Rectified Output Current @TA = 50°C I
Non-Repetitive Peak Forward Surge Current
8.3ms Single half sine-wave superimposed on
rated load (JEDEC Method)
I2t Rating for Fusing (t < 8.35ms) I2t32A
Forward Voltage (per diode) @IF = 1.0A V
Peak Reverse Current @TA = 25°C
At Rated DC Blocking Voltage @T
Typical Thermal Resistance (per leg) (Note 1) R
Typical Thermal Resistance (per leg) (Note 2) R
Operating and Storage Temperature Range T
= 100°C
C
RRM
V
RWM
V
R
V
R(RMS)
O
FSM
I
FM
R
I
j, TSTG
50 100 200 400 600 800 1000 V
35 70 140 280 420 560 700 V
JA
JC
@TA=25°C unless otherwise specified
2.0 A
50 A
1.0 V
10
500
47 K/W
10 K/W
-55 to +150 °C
µA
2
s
Note: 1. Thermal resistance junction to ambient, mounted on PCB at 9.5mm lead length.
2. Thermal resistance junction to case, mounted on 5.0 x 4.0 x 0.8cm thick AL plate heatsink.
KBJ2A – KBJ2M 1 of 3 © 2002 Won-Top Electronics
Page 2
6
100
5
T = 25 C
°
4
10
j
3
FSM
I , PEAK FORWARD SURGE CURRENT (A)
O
I , AVERAGE RECTIFIED CURRENT (A)
2
1
Resistive or
Inductive load
0
0
25 50 75 100 125 150
T,TEMPERATURE(C)
°
Fig.1ForwardCurrentDeratingCurve
Single half-sine-wave
50
(JEDEC method)
40
30
20
10
1
10
NUMBER OF CYCLES AT 60 Hz
Fig. 3 Maximum Non-Repetitive Surge Current
T=25Cj°
100
1.0
Pulse width = 300 sµ
F
I , INSTANTANEOUS FORWARD CURRENT (A)
0.1
0.2
0.0
V , INSTANTANEOUS FORWARD VOLTAGE (V)
F
0.6 1.0
Fig.2TypicalFwdCharacteristics, per element
100
10
j
C , JUNCTION CAPACITANCE (pF)
1
1 10 100
V , REVERSE VOLTAGE (V)
R
Fig. 4 Typical Junction Capacitance
1.4
T=25C
j
f = 1.0MHz
1.8
°
KBJ2A – KBJ2M 2 of 3 © 2002 Won-Top Electronics
Page 3
ORDERING INFORMA TION
Product No. Package Type Shipping Quantity
KBJ2A SIL Bridge 50 Units/Tube
KBJ2B SIL Bridge 50 Units/Tube
KBJ2D SIL Bridge 50 Units/Tube
KBJ2G SIL Bridge 50 Units/Tube
KBJ2J SIL Bridge 50 Units/Tube
KBJ2K SIL Bridge 50 Units/Tube
KBJ2M SIL Bridge 50 Units/Tube
Shipping quantity given is for minimum packing quantity only. For minimum order
quantity, please consult the Sales Department.
Won-Top Electronics Co., Ltd (WTE) has checked all information carefully and believes it to be correct and accurate. However, WTE cannot assume any
responsibility for inaccuracies. Furthermore, this information does not give the purchaser of semiconductor devices any license under patent rights to
manufacturer. WTE reserves the right to change any or all information herein without further notice.
WARNING
support devices or systems without the express written approval.
Won-Top Electronics Co., Ltd.
No. 44 Yu Kang North 3rd Road, Chine Chen Dist., Kaohsiung, Taiwan
Phone:
Fax:
Email:
Internet:
KBJ2A – KBJ2M 3 of 3 © 2002 Won-Top Electronics
: DO NOT USE IN LIFE SUPPORT EQUIPMENT. WTE power semiconductor products are not authorized for use as critical components in life
886-7-822-5408 or 886-7-822-5410
886-7-822-5417
sales@wontop.com
http://www.wontop.com
We power your everyday.
Loading...