Datasheet JV-12S-KT, JV-5S-KT, JV-24S-KT Specification

FTR-K1 SERIES

POWER RELAY

1 POLE - 5A/10A Medium Load Control

JV Series

n FEATURES

l UL, CSA, VDE, SEMKO, CQC recognized
l UL class B (130°C) wire class
l Low prole and space saving

- Height: 12.5 mm

- Mounting space: 175 mm2

l High sensitivity in small package

- Operating power: 0.112 to 0.13 W

- Nominal power: 0.2 to 0.3 W

l High insulation with reinforced insulation system

(between coil and contacts)

- Insulation distance: 8 mm

- Dielectric strength: 5,000 VAC

- Surge strength: 10,000 V

l Plastic materials

- UL94 ame class V-0 -UL CTI level class 2

l Plastic sealed type, RTIII
l RoHS compliant.

Please see page 6 for more information

n PARTNUMBER INFORMATION

JV - 12 S - K T
[Example] (a) (*) (b) (c) (d) (e)

(a) Relay type JV : JV Series

(b) Coil rated voltage 12 : 3....48VDC

Coil rating table at page 3

(c) Coil rating Nil : Standard type (300mW) (not for -KS type)
S : High sensitive type (200mW) (-KS type: 250mW)

(d) Enclosure K : Plastic sealed type, RTIII

(e) Construction T : High density mounting type
S : High power type 10A

Note: Actual marking omits the hyphen (-) of (*)

1

n SPECIFICATION

FTR-K1 SERIES

JV SERIES

Item

Contact
Data

Life Mechanical Min. 5 x 106 operations

Coil Data Rated power (at 20 °C) 300mW 200mW 250mW

Timing Data Operate (at nominal voltage) Max. 8 ms (without bounce)

Insulation Resistance (initial) Min 1,000MOhm at 500VDC

Other

Conguration 1 form A (SPST-NO)

Construction Single

Material Silver alloy AgNi + Au AgSnO2 + Au

Resistance (Initial) Max. 70 mOhm at 6 VDC, 1 A

Contact rating

Max. carrying current 5A 10A

Max. switching voltage 250VAC / 150 VDC

Max. switching power 1,250VA / 150W

Max. switching current 5A 10A

Min. switching load * 100 mA, 5 VDC

Electrical Min. 100 x 103 operations

Operate power (at 20 °C) 130mW 113mW 145mW

Operating temperature range -40 °C to +70 °C (no frost)

Release (at nominal voltage) Max. 4 ms (no diode)

Dielectric strength Open contacts 750VAC, 1 min.

Contacts to coil 5,000VAC, 1 min.

Surge strength Coil to contacts 10,000V / 1.2 x 50µs standard wave

Vibration resistance

Shock

Weight Approximately 4.3 g

Sealing Plastic sealed RTIII

Misoperation 10 to 55Hz double amplitude 1.65 mm

Endurance 10 to 55Hz double amplitude 5 mm

Misoperation Min. 100m/s² (11 ± 1ms)

Endurance Min. 1,000m/s² (6 ± 1ms)

Standard type

JV - ( ) JV - ( ) S JV- ( ) - KS

5A, 250VAC / 30VDC (resistive
load)

High sensitive
type

High power
type

10A, 250VAC /
24VDC

2,500VA /
240W

Min. 50 x 10
operations

3

* Minimum switching loads mentioned above are reference values. Please perform the conrmation test with actual
load before production since reference values may vary according to switching frequencies, environmental contions
and expected reliability levels.

2

n COIL RATING

Standard type (300 mW)

JV SERIES

FTR-K1 SERIES

Coil

Code

12 12 480 7.9 0.6

24 24 1,920 15.8 1.2

48 48 7,680 31.7 2.4

High sensitive type (200 mW)

Coil

Code

12 12 720 9 0.6

18 18 1,620 13.5 0.9

24 24 2,880 18 1.2

Rated Coil

Voltage

(VDC)

3 3 30 1.98 0.15

5 5 83.3 3.3 0.25

6 6 120 3.96 0.3

9 9 270 5.94 0.45

Rated Coil

Voltage

(VDC)

3 3 45 2.25 0.15

5 5 125 3.75 0.25

6 6 180 4.5 0.3

9 9 405 6.75 0.45

Coil Resistance

+/- 10% (Ohm)

Coil Resistance

+/- 10% (Ohm)

Must Operate

Voltage

(VDC) *

Must Operate

Voltage

(VDC) *

Must Release

Must Release

Voltage

(VDC) *

Voltage

(VDC) *

Rated Power

(mW)

300 mW

Rated Power

(mW)

200 mW

Note: All values in the table are valid for 20°C and zero contact current.
* Specied operate values are valid for pulse wave voltage.

10A High power type (250 mW)

Coil

Code

12 12 576 8.4 1.2

18 18 1,296 12.6 1.8

24 24 2,304 14.9 2.4

Note: All values in the table are valid for 20°C and zero contact current.
* Specied operate values are valid for pulse wave voltage.

Rated Coil

Voltage

(VDC)

3 3 36 2.1 0.3

5 5 100 3.5 0.5

6 6 144 4.2 0.6

9 9 324 6.3 0.9

Coil Resistance

+/- 10% (Ohm)

Must Operate

Voltage

(VDC) *

Must Release

(VDC) *

Voltage

Rated Power

(mW)

250 mW

3

FTR-K1 SERIES

JV SERIES

n SAFETY STANDARDS

Type Compliance Contact rating

UL UL 508, UL 873

E56140

LR 35579

VDE 0435, 0631, 0700

40016247

Also complies with SEMKO, CQC.
Please contact sales ofce when SEMKO, CQC logo marking is neccessary on the cover.

Flammability: UL 94-V0 (plastics)

5A, 250 VAC / 30 VDC (resistive)
1/8 HP, 125VAC/250VAC
Pilot duty: C300CSA C22.2 No. 14

5A, 250VAC (cos φ1), 100K
2A, 250VAC (cos φ0.4), 100K
5A, 30VDC (omsec), 100K
10A, 250VAC (cos φ1), JV-KS, 25K
10A, 30VDC (0msec), JV-KS, 100K

n CHARACTERISTIC DATA

Life Curve

JV-KT

4

n REFERENCE DATA

FTR-K1 SERIES

JV SERIES

n DIMENSIONS

l Dimensions

JV-KT type + JV-( )S-KS

l Schematics
(BOTTOM VIEW)

l PC board mounting

hole layout

(BOTTOM VIEW)

Unit: mm

5

FTR-K1 SERIES

JV SERIES

RoHS Compliance and Lead Free Information

1. General Information

l All signal and power relays produced by Fujitsu Components are compliant with RoHS directive 2002/95EC

including amendments.

l Cadmium as used in electrical contacts is exempted from the RoHS directives on October 21st, 2005.

(Amendment to Directive 2002/95/EC)

l All of our signal and power relays are lead-free. Please refer to Lead-Free Status Info for older date codes

at: http://www.fujitsu.com/us/downloads/MICRO/fcai/relays/lead-free-letter.pdf

l Lead free solder plating on relay terminals is Sn-3.0Ag-0.5Cu, unless otherwise specied.

This material has been veried to be compatible with PbSn assembly process.

2. Recommended Lead Free Solder Prole

l Recommended solder Sn-3.0Ag-0.5Cu.

Flow Solder condition:

Pre-heating: maximum 120˚C
Soldering: dip within 5 sec. at
260˚C solder bath

Solder by Soldering Iron:

Soldering Iron
Temperature: maximum 360˚C
Duration: maximum 3 sec.

We highly recommend that you conrm your actual solder conditions

3. Moisture Sensitivity

l Moisture Sensitivity Level standard is not applicable to electromechanical relays, unless otherwise indicated.

4. Tin Whiskers

l Dipped SnAgCu solder is known as presenting a low risk to tin whisker development. No considerable length

whisker was found by our in house test.

6

Fujitsu Components International Headquarter Ofces

FTR-K1 SERIES

JV SERIES

Japan

Fujitsu Component Limited
Gotanda-Chuo Building
3-5, Higashigotanda 2-chome, Shinagawa-ku
Tokyo 141, Japan
Tel: [phone]
Fax: [phone]
Email: [e-mail]
Web: www.fcl.fujitsu.com

North and South America

Fujitsu Components America, Inc.
250 E. Caribbean Drive
Sunnyvale, CA 94089 U.S.A.
Tel: [phone]
Fax: [phone]
Email: [e-mail]
Web: http://us.fujitsu.com/components

Europe

Fujitsu Components Europe B.V.
Diamantlaan 25
2132 WV Hoofddorp
Netherlands
Tel: [phone]
Fax: [phone]
Email: [e-mail]
Web: emea.fujitsu.com/components/

Asia Pacic

Fujitsu Components Asia Ltd.
102E Pasir Panjang Road
#01-01 Citilink Warehouse Complex
Singapore 118529
Tel: [phone]
Fax: [phone]
Email: [e-mail]
Web: http://www.fujitsu.com/sg/services/micro/components/

©2010 Fujitsu Components Europe B.V. All rights reserved. All trademarks or registered trademarks are the property of their respective
owners.

The contents, data and information in this datasheet are provided by Fujitsu Component Ltd. as a service only to its user and only for gen­eral information purposes.
The use of the contents, data and information provided in this datasheet is at the users’ own risk.
Fujitsu has assembled this datasheet with care and will endeavor to keep the contents, data and information correct, accurate, comprehen­sive, complete and up to date.
Fujitsu Components Europe B.V. and afliated companies do however not accept any responsibility or liability on their behalf, nor on behalf
of its employees, for any loss or damage, direct, indirect or consequential, with respect to this datasheet, its contents, data, and information
and related graphics and the correctness, reliability, accuracy, comprehensiveness, usefulness, availability and completeness thereof.
Nor do Fujitsu Components Europe B.V. and afliated companies accept on their behalf, nor on behalf of its employees, any responsibility
or liability for any representation or warrant of any kind, express or implied, including warranties of any kind for merchantability or tness for
particular use, with respect to these datasheets, its contents, data, information and related graphics and the correctness, reliability, accuracy,
comprehensiveness, usefulness, availability and completeness thereof. Rev. August 04, 2010

7