Datasheet JM38510-30902SE, JM38510-30902BE, JM38510-30902B2, JD54LS153BFA, JM38510-30902SF Datasheet (NSC)

TL/F/6393

54LS153/DM54LS153/DM74LS153 Dual 4-Line to 1-Line Data Selectors/Multiplexers

June 1989

54LS153/DM54LS153/DM74LS153
Dual 4-Line to 1-Line Data Selectors/Multiplexers

General Description

Each of these data selectors/multiplexers contains invert­ers and drivers to supply fully complementary, on-chip, bina­ry decoding data selection to the AND-OR-invert gates.
Separate strobe inputs are provided for each of the two
four-line sections.

Features

Y

Permits multiplexing from N lines to 1 line

Y

Performs at parallel-to-serial conversion

Y

Strobe (enable) line provided for cascading (N lines to
n lines)

Y

High fan-out, low impedance, totem pole outputs

Y

Typical average propagation delay times
Ð From data 14 ns
Ð From strobe 19 ns
Ð From select 22 ns

Y

Typical power dissipation 31 mW

Y

Alternate Military/Aerospace device (54LS153) is avail­able. Contact a National Semiconductor Sales Office/
Distributor for specifications.

Connection Diagram

Dual-In-Line Package

TL/F/6393– 1

Order Number 54LS153DMQB, 54LS153FMQB,

54LS153LMQB, DM54LS153J, DM54LS153W,

DM74LS153M or DM74LS153N

See NS Package Number E20A, J16A, M16A,

N16E or W16A

Logic Diagram

TL/F/6393– 2

Function Table

Select

Data Inputs Strobe Output

Inputs

B A C0 C1 C2 C3 G Y

XXXXXX H L
LL L X X X L L
LL H X X X L H
LH X L X X L L
LH X H X X L H
HL X X L X L L
HL X X H X L H
HH X X X L L L
HH X X X H L H

Select inputs A and B are common to both sections.

H

e

High Level, LeLow Level, XeDon’t Care

C

1995 National Semiconductor Corporation RRD-B30M105/Printed in U. S. A.

Absolute Maximum Ratings (Note)

If Military/Aerospace specified devices are required,
please contact the National Semiconductor Sales
Office/Distributors for availability and specifications.

Supply Voltage 7V

Input Voltage 7V

Operating Free Air Temperature Range

DM54LS and 54LS

b

55§Ctoa125§C

DM74LS 0

§

Ctoa70§C

Storage Temperature Range

b

65§Ctoa150§C

Note:

The ‘‘Absolute Maximum Ratings’’ are those values
beyond which the safety of the device cannot be guaran­teed. The device should not be operated at these limits. The
parametric values defined in the ‘‘Electrical Characteristics’’
table are not guaranteed at the absolute maximum ratings.
The ‘‘Recommended Operating Conditions’’ table will define
the conditions for actual device operation.

Recommended Operating Conditions

Symbol Parameter

DM54LS153 DM74LS153

Units

Min Nom Max Min Nom Max

V

CC

Supply Voltage 4.5 5 5.5 4.75 5 5.25 V

V

IH

High Level Input Voltage 2 2 V

V

IL

Low Level Input Voltage 0.7 0.8 V

I

OH

High Level Output Current

b

0.4

b

0.4 mA

I

OL

Low Level Output Current 4 8 mA

T

A

Free Air Operating Temperature

b

55 125 0 70

§

C

Electrical Characteristics over recommended operating free air temperature range (unless otherwise noted)

Symbol Parameter Conditions Min

Typ

Max Units

(Note 1)

V

I

Input Clamp Voltage V

CC

e

Min, I

I

eb

18 mA

b

1.5 V

V

OH

High Level Output V

CC

e

Min, I

OH

e

Max DM54 2.5 3.4

V

Voltage V

IL

e

Max, V

IH

e

Min

DM74 2.7 3.4

V

OL

Low Level Output V

CC

e

Min, I

OL

e

Max DM54 0.25 0.4

Voltage V

IL

e

Max, V

IH

e

Min

DM74 0.35 0.5 V

I

OL

e

4 mA, V

CC

e

Min DM74 0.25 0.4

I

I

Input Current@Max V

CC

e

Max, V

I

e

7V

0.1 mA

Input Voltage

I

IH

High Level Input Current V

CC

e

Max, V

I

e

2.7V 20 mA

I

IL

Low Level Input Current V

CC

e

Max, V

I

e

0.4V

b

0.36 mA

I

OS

Short Circuit V

CC

e

Max DM54

b

20

b

100 mA

Output Current (Note 2)

DM74

b

20

b

100

I

CC

Supply Current V

CC

e

Max (Note 3) 6.2 10 mA

Note 1: All typicals are at V

CC

e

5V, T

A

e

25§C.

Note 2: Not more than one output should be shorted at a time, and the duration should not exceed one second.

Note 3: I

CC

is measured with all outputs open and all other inputs grounded.

2

Switching Characteristics at V

CC

e

5V and T

A

e

25§C (See Section 1 for Test Waveforms and Output Load)

R

L

e

2kX

From (Input)

Symbol Parameter to (Output)

C

L

e

15 pF C

L

e

50 pF

Units

Min Max Min Max

t

PLH

Propagation Delay Time

Data to Y 15 20 ns

Low to High Level Output

t

PHL

Propagation Delay Time

Data to Y 26 35 ns

High to Low Level Output

t

PLH

Propagation Delay Time

Select to Y 29 35 ns

Low to High Level Output

t

PHL

Propagation Delay Time

Select to Y 38 45 ns

High to Low Level Output

t

PLH

Propagation Delay Time

Strobe to Y 24 30 ns

Low to High Level Output

t

PHL

Propagation Delay Time

Strobe to Y 32 40 ns

High to Low Level Output

3

Physical Dimensions inches (millimeters)

Ceramic Leadless Chip Carrier Package (E)

Order Number 54LS153LMQB

NS Package Number E20A

16-Lead Ceramic Dual-In-Line Package (J)

Order Number 54LS153DMQB or DM54LS153J

NS Package Number J16A

4

Physical Dimensions inches (millimeters) (Continued)

16-Lead Small Outline Molded Package (M)

Order Number DM74LS153M

NS Package Number M16A

16-Lead Molded Dual-In-Line Package (N)

Order Number DM74LS153N

NS Package Number N16E

5

54LS153/DM54LS153/DM74LS153 Dual 4-Line to 1-Line Data Selectors/Multiplexers

Physical Dimensions inches (millimeters) (Continued)

16-Lead Ceramic Flat Package (W)

Order Number 54LS153FMQB or DM54LS153W

NS Package Number W16A

LIFE SUPPORT POLICY

NATIONAL’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT
DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT OF NATIONAL
SEMICONDUCTOR CORPORATION. As used herein:

1. Life support devices or systems are devices or 2. A critical component is any component of a life
systems which, (a) are intended for surgical implant support device or system whose failure to perform can
into the body, or (b) support or sustain life, and whose be reasonably expected to cause the failure of the life
failure to perform, when properly used in accordance support device or system, or to affect its safety or
with instructions for use provided in the labeling, can effectiveness.
be reasonably expected to result in a significant injury
to the user.

National Semiconductor National Semiconductor National Semiconductor National Semiconductor
Corporation Europe Hong Kong Ltd. Japan Ltd.

1111 West Bardin Road Fax: (

a

49) 0-180-530 85 86 13th Floor, Straight Block, Tel: [phone]
Arlington, TX 76017 Email: [e-mail] Ocean Centre, 5 Canton Rd. Fax: [phone]
Tel: [phone] Deutsch Tel: (

a

49) 0-180-530 85 85 Tsimshatsui, Kowloon
Fax: [phone] English Tel: (

a

49) 0-180-532 78 32 Hong Kong

Fran3ais Tel: (

a

49) 0-180-532 93 58 Tel: [phone]

Italiano Tel: (

a

49) 0-180-534 16 80 Fax: [phone]

National does not assume any responsibility for use of any circuitry described, no circuit patent licenses are implied and National reserves the right at any time without notice to change said circuitry and specifications.