Page 1
TL/F/6547
54153/DM54153/DM74153 Dual 4-Line to 1-Line Data Selectors/Multiplexers
June 1989
54153/DM54153/DM74153 Dual 4-Line to 1-Line
Data Selectors/Multiplexers
General Description
Each of these data selectors/multiplexers contains inverters and drivers to supply fully complementary, on-chip, binary decoding data selection to the AND-OR-invert gates.
Separate strobe inputs are provided for each of the two
four-line sections.
Features
Y
Permits multiplexing from N lines to 1 line
Y
Performs parallel-to-serial conversion
Y
Strobe (enable) line provided for cascading (N lines to
n lines)
Y
High fan-out, low-impedance, totem-pole outputs
Y
Typical average propagation delay times
From data 11 ns
From strobe 18 ns
From select 20 ns
Y
Typical power dissipation 170 mW
Y
Alternate Military/Aerospace device (54153) is available. Contact a National Semiconductor Sales Office/
Distributor for specifications.
Connection Diagram
Dual-In-Line Package
TL/F/6547– 1
Order Number 54153DMQB, 54153FMQB, DM54153J,
DM54153W or DM74153N
See NS Package Number J16A, N16E or W16A
Function Table
Select
Data Inputs Strobe Output
Inputs
B A C0 C1 C2 C3 G Y
XXXXXX H L
LL L X X X L L
LL H X X X L H
LH X L X X L L
LH X H X X L H
HL X X L X L L
HL X X H X L H
HH X X X L L L
HH X X X H L H
Select inputs A and B are common to both sections.
H
e
High Level, LeLow Level, XeDon’t Care
C
1995 National Semiconductor Corporation RRD-B30M105/Printed in U. S. A.
Page 2
Absolute Maximum Ratings (Note)
If Military/Aerospace specified devices are required,
please contact the National Semiconductor Sales
Office/Distributors for availability and specifications.
Supply Voltage 7V
Input Voltage 5.5V
Operating Free Air Temperature Range
DM54 and 54
b
55§Ctoa125§C
DM74 0
§
Ctoa70§C
Storage Temperature Range
b
65§Ctoa150§C
Note:
The ‘‘Absolute Maximum Ratings’’ are those values
beyond which the safety of the device cannot be guaranteed. The device should not be operated at these limits. The
parametric values defined in the ‘‘Electrical Characteristics’’
table are not guaranteed at the absolute maximum ratings.
The ‘‘Recommended Operating Conditions’’ table will define
the conditions for actual device operation.
Recommended Operating Conditions
Symbol Parameter
DM54153 DM74153
Units
Min Nom Max Min Nom Max
V
CC
Supply Voltage 4.5 5 5.5 4.75 5 5.25 V
V
IH
High Level Input Voltage 2 2 V
V
IL
Low Level Input Voltage 0.8 0.8 V
I
OH
High Level Output Current
b
0.8
b
0.8 mA
I
OL
Low Level Output Current 16 16 mA
T
A
Free Air Operating Temperature
b
55 125 0 70
§
C
Electrical Characteristics over recommended operating free air temperature range (unless otherwise noted)
Symbol Parameter Conditions Min
Typ
Max Units
(Note 1)
V
I
Input Clamp Voltage V
CC
e
Min, I
I
eb
12 mA
b
1.5 V
V
OH
High Level Output V
CC
e
Min, I
OH
e
Max
2.4 3.2 V
Voltage V
IL
e
Max, V
IH
e
Min
V
OL
Low Level Output V
CC
e
Min, I
OL
e
Max
0.2 0.4 V
Voltage V
IH
e
Min, V
IL
e
Max
I
I
Input Current@Max V
CC
e
Max, V
I
e
5.5V
1mA
Input Voltage
I
IH
High Level Input Current V
CC
e
Max, V
I
e
2.4V 40 mA
I
IL
Low Level Input Current V
CC
e
Max, V
I
e
0.4V
b
1.6 mA
I
OS
Short Circuit V
CC
e
Max DM54
b
20
b
55
mA
Output Current (Note 2)
DM74
b
18
b
57
I
CC
Supply Current V
CC
e
Max DM54 34 52
mA
(Note 3)
DM74 34 60
Note 1: All typicals are at V
CC
e
5V, T
A
e
25§C.
Note 2: Not more than one output should be shorted at a time.
Note 3: I
CC
is measured with the outputs open and all inputs grounded.
2
Page 3
Switching Characteristics at V
CC
e
5V and T
A
e
25§C (See Section 1 for Test Waveforms and Output Load)
Symbol Parameter
From (Input) R
L
e
400X,C
L
e
30 pF
Units
To (Output)
Min Max
t
PLH
Propagation Delay Time
Data to Y 18 ns
Low to High Level Output
t
PHL
Propagation Delay Time
Data to Y 23 ns
High to Low Level Output
t
PLH
Propagation Delay Time
Select to Y 34 ns
Low to High Level Output
t
PHL
Propagation Delay Time
Select to Y 34 ns
High to Low Level Output
t
PLH
Propagation Delay Time
Strobe to Y 30 ns
Low to High Level Output
t
PHL
Propagation Delay Time
Strobe to Y 23 ns
High to Low Level Output
Logic Diagram
TL/F/6547– 2
3
Page 4
4
Page 5
Physical Dimensions inches (millimeters)
16-Lead Ceramic Dual-In-Line Package (J)
Order Number 54153DMQB or DM54153J
NS Package Number J16A
16-Lead Molded Dual-In-Line Package (N)
Order Number DM74153N
NS Package Number N16E
5
Page 6
54153/DM54153/DM74153 Dual 4-Line to 1-Line Data Selectors/Multiplexers
Physical Dimensions inches (millimeters) (Continued)
16-Lead Ceramic Flat Package (W)
Order Number 54153FMQB or DM54153W
NS Package Number W16A
LIFE SUPPORT POLICY
NATIONAL’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT
DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT OF NATIONAL
SEMICONDUCTOR CORPORATION. As used herein:
1. Life support devices or systems are devices or 2. A critical component is any component of a life
systems which, (a) are intended for surgical implant support device or system whose failure to perform can
into the body, or (b) support or sustain life, and whose be reasonably expected to cause the failure of the life
failure to perform, when properly used in accordance support device or system, or to affect its safety or
with instructions for use provided in the labeling, can effectiveness.
be reasonably expected to result in a significant injury
to the user.
National Semiconductor National Semiconductor National Semiconductor National Semiconductor
Corporation Europe Hong Kong Ltd. Japan Ltd.
1111 West Bardin Road Fax: (
a
49) 0-180-530 85 86 13th Floor, Straight Block, Tel: 81-043-299-2309
Arlington, TX 76017 Email: cnjwge@tevm2.nsc.com Ocean Centre, 5 Canton Rd. Fax: 81-043-299-2408
Tel: 1(800) 272-9959 Deutsch Tel: (
a
49) 0-180-530 85 85 Tsimshatsui, Kowloon
Fax: 1(800) 737-7018 English Tel: (
a
49) 0-180-532 78 32 Hong Kong
Fran3ais Tel: (
a
49) 0-180-532 93 58 Tel: (852) 2737-1600
Italiano Tel: (
a
49) 0-180-534 16 80 Fax: (852) 2736-9960
National does not assume any responsibility for use of any circuitry described, no circuit patent licenses are implied and National reserves the right at any time without notice to change said circuitry and specifications.
Loading...