Datasheet AV9120M-53, ICS9120M-53 Datasheet (ICST)

Integrated
Circuit
Systems, Inc.

FeaturesGeneral Description

ICS9120-53

Frequency Generator for CD-ROM Systems

9120-53 Rev B 052497P

Block Diagram

• Generates 33.8688 MHz or 42.83 MHz decode clocks
plus the 12 and 24 MHz fixed clocks

• Single 8.4672 MHz crystal or system clock reference

• 200ps one sigma jitter maintains 16-bit performance

• Output rise/fall times less than 2.0ns

• On-chip loop filter components

• 3.3V -5V supply range

• 8-pin, 150-mil SOIC

Applications

• Specifically designed to support the high performance
requirements of CD-ROM drive systems

The ICS9120-53 is a high performance frequency generator
designed to support digital compact disk drive systems. It
offers all clock frequencies required for the servo and
decoder sections of these devices. These frequencies are
synthesized from a single 16.9344 MHz on-chip oscillator.

High accuracy, low jitter PLLs meet the 150 ppm frequency
tolerance required by these systems. Fast output clock
edge rates minimize board induced jitter.

Unlike competitive devices, the ICS9120-53 operates over
the entire 3.0-5.5V range.

Pin Configuration

8-Pin SOIC

Functionality

X1, X2

(MHz)

FS Divisor CLK 1

8.4672 0 X12÷3 33.8688

86.4672 1 X61÷6 42.83

Clock

X1, X2

(MHz)

Divisor

Output

(MHz)

12M 8.4672 X 52÷11÷2 20.0134
24M 8.4672 X52÷11 40.0268

ICS reserves the right to make changes in the device data identified in this
publication without further notice. ICS advises its customers to obtain the latest
version of all device data to verify that any information being relied upon by the
customer is current and accurate.

2

ICS9120-53

Pin Descriptions

PIN

NUMBER

PIN

NAME

TYPE DESCRIPTION

1 X1 Input Crystal or external clock source. Has feedback bias for crystal.
2 VDD Power +Power supply input.
3 GND Power Ground return fo r Pin 2.
4 20M Output 12 MHz fixed output clock.
5 CLK1 Output 33.8/42.83 MHz selectable clock output.
6 40M Output 24 MHz fixedoutput clock.
7 FS Input Input selector for CLK1.
8 X2 Output Crystal output drive.

3

ICS9120-53

Absolute Maximum Ratings

Electrical Characteristics at 5 V

VDD = +4.5 to +5.5 V, TA = 0 to 70oC unless otherwise stated

*Parameter is guaranteed by design and characterization. Not 100% tested in production.

A VDD, VDD referenced to GND .......................................................................... 7V

Operating temperature under bias .................................................... 0oC to +70oC

Storage temperature..................................................................... -65oC to +150oC

Volta ge on I/O pins referenced to GND ...................... GND -0.5V to VDD +0. 5V

Power dissipation......................................................................................0.5 Watts

Stresses above those listed under Absolute Maximum Ratings may cause permanent damage to the device. This is a stress
rating only and functional operation of the device at these or any other conditions above those indicated in the operational
sections of the specifications is not implied. Exposure to absolute maximum rating conditions for extended periods may
affect product reliability.

DC Characteristics

PARAMETER SYMBOL TEST CONDITIONS MIN TYP M AX UNITS

Input Low Voltage V

IL

--0.8V

Input High Voltage V

IH

2.0 - - V

Input Low Current I

IL

VIN=0V -18.0 -8.3 - µ A

Input High Current I

IH

VIN=V

DD

--5.0µA

Output Low Voltage V

OL

*I

OL

=+10mA - 0.15 0.4 V

Output High Voltage VOH*I

OH

=-30mA 2.4 3.7 - V

Output Low Current I

OL

*V

OL

=0.8V 25.0 45.0 - mA

Output High Current IOH*V

OH

=2.4V - -53.0 -35.0 m A

Supply Current I

DD

Unloaded - 24.0 50.0 m A

Pull-up Resistor Value R

PU

* - 400.0 800.0 k ohm

AC Characteristics

Rise Time T

r

* 15pF load, 0.8 to 2.0V - 0.9 2.0 ns

Fall Tim e T

f

* 15pF load, 2.0 to 0.8V - 0.7 1.5 ns
Rise Time Tr* 15pF load, 20% to 80% - 1.8 3.25 ns
Fall Tim e Tf* 15pF load, 80% to 20% - 1.4 2.5 ns

Duty Cycle Dt*

15pF load @
50% of VDD

45.0 50.0 55.0 %

Jitter, On e Sigm a T

jis

* For all frequencies - 100.0 200.0 ps

Jitter, Ab solute T

jab

* For all frequencies -500.0 300.0 500.0 ps

Jitter, On e Sigm a T

jis

* REFCLK only - 266.0 450.0 ps

Jitter, Ab solute T

jab

* REFCLK only -1200 750.0 1200 ps
Input Frequency Range Fi* 8.0 8.4 10.0 M Hz
Output Frequency Range Fo* 11.0 - 42.0 M Hz
Output Mean Frequency

Accuracy vs. Target

Foa* With 8.4672 M Hz input -0.125 - -0.04 %
Power-up Time Tpu* 0 to 33.8 M Hz - 5.5 12.0 m s
Crystal Input Capacitance C

inx

* X1 (Pin 1), X2 (Pin 8) -5 5 -

pF

4

ICS9120-53

Electrical Characteristics at 3.3 V

VDD = +3.0 to +3.7 V, TA = 0OC-70oC unless otherwise stated

*Parameter is guaranteed by design and characterization. Not 100% tested in production.

DC Characteristics

PARAMETER SYMBOL TEST CONDITIONS MIN TYP MAX UNITS

Input Low Voltage V

IL

- - 0.2V

DD

V

Input High Voltage V

IH

0.7V

DD

- - V

Input Low Current I

IL

VIN=0V -8.0 -3. 6 - µ A

Input High Current I

IH

VIN=V

DD

- - 5.0 µ A

Output Low Voltage V

OL

*IOL=6.0mA - 0. 05V

DD

0.1 V

Output High Voltage V

OH

*IOH=4.0mA 0.85V

DD

0.94V

DD

-V

Output Low Current I

OL

*V

O

L=0.2V

DD

15.0 24.0 - mA

Output High Current I

OH

*VOH=0.7V

DD

- -13. 0 -8.0 mA

Supply Current I

DD

Unloaded - 16.0 40.0 mA

Pull-up Resistor Value R

PU

* - 620. 0 900.0 k ohm

AC Characteristics

Rise Time Tr* 15pF load 0.8 to 2.0V - 1.5 4.0 ns
Fall Time T

f

* 15pF load 2.0 to 0.8V - 1.0 3.0 ns

Rise Time T

r

* 15pF load 20% to 80% - 2.2 4.0 ns

Fall Time T

f

* 15pF load 80% to 20% - 1.5 3.0 ns

Duty Cycle D

t

* 15pF load @ 50% ofVDD 45.0 50.0 55.0 %

Jitter, One Sigma T

jis

* For all frequencies - 150. 0 200 ps

Jitter Absolute T

jab

* For all frequencies -550.0 330.0 550.0 ps
Input Frequency Range Fi* 8.0 8.4 10.0 MHz
Output Frequency Range F

o

* 11.0 - 38.0 MHz

Output Mean Frequency
Accuracy vs. Target

F

oa

* With 8.4672 MHz input -0.125 - -0. 04 %

Power-up Time T

pu*

0 to 33.8 MHz - 5.5 12.0 ms

Crystal Input Capacitance C

inx*

X1 (Pin 1),
X2 (Pin 8)

-5-pF

5

ICS9120-53

Ordering Information

ICS9120M-53

0.194

0.031

0.024

0.016

0.050

0.006 
± 0.004

0.238

0.154

0.015

0.063

0.025

0.008

8-Pin SOIC Package

Example:


ICS XXXX M-PPP

Package Type

M =SOIC

Device Type (consists of 3 or 4-digit numbers)

Prefix



ICS, AV=Standard Device

Pattern Number (2 or 3-digit number for parts with ROM code pattern)

ICS reserves the right to make changes in the device data identified in this
publication without further notice. ICS advises its customers to obtain the latest
version of all device data to verify that any information being relied upon by the
customer is current and accurate.