Datasheet HUP80-32S, HUP80-36-1, HUP80-36-1S, HUP80-36-3, HUP80-36-3S Datasheet (IPSI)

...
Page 1
•
•
Input
Input Voltage • 90-264 VAC Input Frequency • 47 to 63 Hz Input Current • 1.9A maximum
Output
Output Voltage: • See Tables Output Current • See Tables Output Power Range • 0 to 80 Watts Ripple and Noise • 1% peak to peak max. Overvoltage • Provided on output #1 only set at
Protection 112-132% of its nominal voltage Overcurrent • All outputs protected to short
Protection: circuit conditions Temperature • All outputs ±0.04%/°C
coefficient: maximum Transient Response • Maximum excursion of 4% or better
on all models. Recovers to 1% of final value within 500 µs after a 25% step load change
General
Efficiency • 83% typical Hold-up time • 12 msec minimum Line Regulation • ±1% maximum at full load Inrush Current • 15A max. at 115 VAC or
30A max. at 230 VAC cold start
Withstand Voltage • 3000 VAC from input to output
1500 VAC from input to ground 500 VAC from output to ground
Insulation Resistance • 100 Mohm minimum from
output to ground
Environmental
Operating • 0 °C to +70 °C, derate linearly from Temperature 100% load at +40 °C to 50% load
at +70 °C
Storage • -40 °C to +85 °C Temperature
MTBF • 100,000 hours minimum at full load
at 25 °C ambient
EMC & Safety
EMI Requirement • Meets conducted and radiated
limits of a) FCC Part 15 Class B b) CISPR 22 Class B
Safety Requirements • Approved to:
a) UL 1950 b) CSA C22.2 No. 234 per cUL c) EN60950
80 Watts
HUP80 Series
AC/DC External Desktop
Specification
•
Intelligent Design Quality Product
XPiQ inc.
Meets EN61000-3-2
•
Built-in EMI Filter
•
100% Burn-in
•
Input Surge Current Protection
•
CE Mark
•
Approved to UL, CSA and TUV
Safety Standards
•
Wide Input Voltage 90-264 VAC
All specifications typical at nominal line, full load and 25°C
PH: 508 429.9883
FAX: 800 226.2100
Holliston, MA 01746 USA
www.XPiQ.com
71
HUP80.qxd 23/6/03 2:19 pm Page 1
Page 2
Mechanical Details
OUTPUT VOLTAGE & CURRENT RATINGS HUP80
Max Output #1 Output #2 Output #3
Output Model
Power Vnom Imin Imax Tol. Vnom Imin Imax Tol.
(1)
Vnom Imin Imax Tol.
(1)
Number 50 W 3.3 V 0.0 A 15.1 A 5% HUP80-00 65 W 5.0 V 0.0 A 13.0 A 5% HUP80-10 70 W 7.0 V 0.0 A 9.9 A 4% HUP80-10-1 75 W 10.0 V 0.0 A 7.5 A 3% HUP80-11 80 W 12.0 V 0.0 A 6.6 A 3% HUP80-12 80 W 15.0 V 0.0 A 5.3 A 3% HUP80-13 80 W 18.0 V 0.0 A 4.4 A 3% HUP80-13-1 80 W 24.0 V 0.0 A 3.3 A 2% HUP80-14 80 W 30.0 V 0.0 A 2.7 A 2% HUP80-16 80 W 36.0 V 0.0 A 2.2 A 2% HUP80-17 80 W 48.0 V 0.0 A 1.7 A 2% HUP80-18 60 W +5.0 V 0.5 A 7.0 A 5% +12 V 0.3 A 3.0 A 5% HUP80-23 60 W +5.0 V 0.5 A 7.0 A 5% +15 V 0.1 A 3.0 A 5% HUP80-24 60 W +5.0 V 0.5 A 7.0 A 5% +24 V 0.2 A 2.0 A 5% HUP80-25 60 W +5.0 V 0.5 A 7.0 A 5% -24 V 0.2 A 2.0 A 5% HUP80-25-1 38 W +3.3 V 0.5 A 7.0 A 5% +5 V 0.1 A 3.0 A 5% HUP80-26 56 W +3.3 V 0.5 A 7.0 A 5% +12 V 0.1 A 2.7 A 5% HUP80-27 65 W +5.0 V 0.5 A 6.0 A 5% +12 V 0.1 A 2.7 A 5% -5 V 0.1 A 0.3 A 5% HUP80-30 59 W +5.0 V 0.5 A 6.0 A 5% +12 V 0.1 A 2.1 A 5% -12 V 0.1 A 0.3 A 5% HUP80-31 65 W +5.0 V 0.5 A 6.0 A 5% +15 V 0.1 A 2.1 A 5% -15 V 0.1 A 0.2 A 5% HUP80-32 63 W +3.3 V 0.5 A 7.0 A 5% +12 V 0.1 A 3.0 A 5% -5 V 0.1 A 0.8 A 5% HUP80-36-1 65 W +3.3 V 0.5 A 7.0 A 5% +12 V 0.1 A 3.0 A 5% -12 V 0.1 A 0.8 A 5% HUP80-36-3 65 W +5.0 V 0.5 A 6.0 A 5% +24 V 0.1 A 1.2 A 5% -12 V 0.1 A 0.4 A 5% HUP80-39 65 W +5.0 V 0.5 A 7.0 A 5% +24 V 0.1 A 2.0 A 5% -24 V 0.1 A 0.5 A 5% HUP80-39-1
NOTES:
1. Dimensions shown in inches (mm).
2. Tolerance 0.04” (1.0mm) maximum.
3. Cable length is 48.0”.
4. Optional output connectors available consult factory.
5. Weight: 400-500 g approx.
6. Multiple output models include a ferrite bead on the output cable.
PIN CONNECTIONS 5-Pin is Standard
Pin Single Dual Triple
1 Common Common Common 2 Common Common Common 3 Output Output #1 Output #1 4 Common Common Output #3 5 Output Output #2 Output #2
For HUP80-00 and HUP80-10 only: Output connector is an 8-pin DIN connector. Pin 3, 5, 7 and 8 are +Vout. Pins 1, 2, 4 and 6 are Common.
8-Pin DIN for HUP80-00,
-10 Only
1. Total regulation includes tolerance, line regulation and load regulation.
2. For optional On/Off switch, add suffix ‘S’ to model number.
Notes
•
72
PH: 508 429.9883
FAX: 800 226.2100
Holliston, MA 01746 USA
www.XPiQ.com
HUP80.qxd 23/6/03 2:19 pm Page 2
Loading...