45 Watts
HUP45 Series
Built-in EMI Filter
•
100% Burn-in
•
Input Surge Current Protection
•
CE Mark
•
Approved to UL, CSA and TUV
Safety Standards
•
Short Circuit Protection
•
•
•
Specification
All specifications typical at nominal line, full load and 25°C
Intelligent Design Quality Product
XPiQ inc.
AC/DC Desktop
Input
Input Voltage • 90-264 VAC
Input Frequency • 47 to 63 Hz
Input Current • 1.2A maximum
Output
Output Voltage: • See Tables
Output Current • See Tables
Output Power Range • 0 to 50 Watts
Ripple and Noise • 1% peak to peak max.
Overcurrent • All outputs protected to short
Protection: circuit conditions
Temperature • All outputs ±0.04%/°C
coefficient: maximum
Transient Response • Maximum excursion of 4% or
better on all models. Recovers
to 1% of final value within
500µs after a 25% step load
change
General
Efficiency • 83% typical
Hold-up time • 16msec minimum
Line Regulation • ±0.5% maximum at full load
Inrush Current • 15A at 115 VAC or
30A at 230 VAC at 25°C
cold start
Withstand Voltage • 3000 VAC from input to output
1500 VAC from input to ground
500 VAC from output to ground
Insulation Resistance • 100 Mohm minimum from
output to ground
Environmental
Operating • 0°C to +70°C*
Temperature
Storage • -40°C to +85°C
Temperature
MTBF • 100,000 hours minimum at full load
at 25°C ambient
EMI Requirement • Meets conducted and radiated
limits of
a) FCC part 15 Level B
b) CISPR 22 Class B
Safety Requirements • Approved to:
a) UL 1950
b) CSA C22.2 No. 234 per cUL
c) EN60950
* Derate linearly from 100% load at 40°C to 50% load at 70°C
PH: 508 429.9883
FAX: 800 226.2100
Holliston, MA 01746 USA
www.XP-iQ.com
141