• Available in 8 mm Tape on
7" (178 mm) Diameter
Reels
Applications
• Push-Button Backlighting
• LCD Backlighting
• Symbol Backlighting
• Front Panel Indicator
Description
These single and bicolor LEDs
are designed in an industry
standard package for ease of
handling and use. Five different
LED colors are available in two
compact, low profile, single color
packages. The 3.2 x 1.6 mm is
an excellent all around package,
and the small 2.0 x 1.25 mm
package is designed for applications where space is limited.
The single color LEDs have
tinted diffused optics. The
bicolor package is untinted,
diffused.
The small size, low 1.1 mm
profile and wide viewing angle
make these LEDs excellent for
backlighting applications and
front panel illumination. They
are compatible with IR reflow
soldering processes.
Device Selection Guide
DHHighBicolor
FootprintAlGaAsEfficiencyHER-
(mm)RedRedOrangeYellowGreenGreen
3.20 x 1.60HSMH-C650HSMS-C650HSMD-C650HSMY-C650HSMG-C650
2.00 x 1.25HSMH-C670HSMS-C670HSMD-C670HSMY-C670HSMG-C670
3.20 x 2.70HSMF-C655
1-212
5964-9360E
Page 2
CATHODE MARK
CATHODE MARK
3.20
(0.126)
2.00
(0.079)
POLARITY
1.10
(0.043)
0.50 (0.020)
0.50
(0.020)
HSMX-C650 Series
[1206]
GREEN
1.60
(0.063)
CATHODE MARK
2.00
(0.079)
1.40
(0.055)
POLARITY
0.50 (0.020)
0.40
(0.016)
HSMX-C670 Series
GREEN
1.10
(0.043)
[805]
1.25
(0.049)
1.40
(0.055)
RED
3.20
(0.126)
2.00
(0.079)
0.50 (0.020)
0.50 (0.020)
(0.035)
0.90
1.10
(0.043)
POLARITY
2.70
(0.106)
0.25
R
(0.010)
HSMF-C655
[1210]
RED
1-213
Page 3
Absolute Maximum Ratings at T
= 25°C
A
HSMX-C650
ParameterHSMF-C655HSMX-C670Units
DC Forward Current
[1]
2520mA
Power Dissipation6550mW
Reverse Voltage (IR = 100 µA)55V
LED Junction Temperature9595°C
Operating Temperature Range-25 to +80-25 to +80°C
Storage Temperature Range-30 to +85-30 to +85°C
Soldering Temperature See SMT reflow soldering profile, Figure 6
Notes:
1. Derate linearly as shown in Figure 4 for temperatures above 25°C.
1. The luminous intensity, IV, is measured at the peak of the spatial radiation pattern which may not be aligned with the
mechanical axis of the lamp package.
2. The dominant wavelength, λd, is derived from the CIE Chromaticity Diagram and represents the perceived color of the device.
3. θ1/2 is the off-axis angle where the luminous intensity is 1/2 the peak intensity.
4. Chip LEDs are supplied in 8 mm embossed tape on 178 mm (7 in.) diameter reels, with 3000 devices per reel. Minimum order
quantity and order incremenets are in quantity of reels only.