Page 1
Corporate: www.cd techno.com
Product: www.cd poweronline.com
HPR4XXHPR4XX
HPR4XX
HPR4XXHPR4XX
0.75 Watt Miniature SIP DC/DC Converter
!!
! Non-Conductive Case
!!
High Isolation Voltage: 3000
!
!!
PK Test
V
!!
! Single-In-Line Package (SIP)
!!
!!
!
Internal Input and Output
!!
!!
! Low Cost
!!
!!
!!
! High Output Power Density:
!!
10 Watts/Inch
!!
! Extended Temperature Range:
!!
-25°C to +85°C
!!
! High Efficiency to 79%
!!
3
The HPR4XX Series uses advanced circuit
design and packaging technology to realize
superior reliability and performance. A
170kHz push-pull oscillator is used in the
input stage. The HPR4XX Series reduces
beat-frequency oscillation problems when
used with high frequency isolation amplifiers.
Reduced parts count and high efficiency add to
the reliability of the HPR4XX Series.
SPECIFICATIONS All specifications are typical at T
The high efficiency of the HPR4XX Series
means less internal power dissipation, as low
as 190mW. With less heat to dissipate the
HPR4XX Series can operate at higher
temperatures with no degradation of reliable
operation. In addition, the high efficiency of
the HPR4XX Series means the series is able
to offer greater than 10 W/inch3 of output
power density. Operation down to no load
= +25°C nominal input voltage unless otherwise specified.
A
will not impact the reliability of the series,
although this product has a >1mA minimum
load for specifications purposes.
The HPR4XX Series provides high
isolation in a very small package. The use of
surface mounted devices and manufacturing
technologies makes it possible to offer
premium performance and low cost.
PRODUCT SELECTION CHART
NOMINAL RATED RATED INPUT CURRENT (mA) REFLECTED
INPUT OUTPUT OUTPUT RIPPLE
MODEL (VDC) (VDC) (mA) (mA) TYP MAX (mAp-p) (%)
HPR400 5 5 150 20 216 235 10 69
HPR401 5 12 62 20 212 235 5 70
HPR402 5 15 50 20 212 235 5 71
HPR403 5 ±5 ± 75 20 218 245 5 68
HPR404 5 ±12 ±30 20 212 235 5 68
HPR405 5 ±15 ±25 20 220 220 5 75
HPR406 12 5 15 0 10 90 100 5 69
HPR407 12 12 62 10 81 90 5 77
HPR408 12 15 50 10 81 90 5 77
HPR409 12 ±5 ±75 10 88 98 5 71
HPR410 12 ±12 ±3 0 10 81 90 5 74
HPR411 12 ±15 ±25 10 81 90 5 77
HPR412 15 5 150 8 72 8 0 5 69
HPR413 15 12 62 8 72 80 5 69
HPR414 15 15 50 8 72 80 5 69
HPR415 15 ±5 ±75 8 72 80 5 69
HPR416 15 ±12 ±30 8 63 70 5 76
HPR417 15 ±15 ±25 8 63 66 5 79
HPR418 24 5 150 8 48 53 15 65
HPR419 24 12 62 8 48 5 3 15 65
HPR420 24 15 50 8 45 5 0 15 69
HPR421 24 ±5 ±75 8 45 50 15 6 9
HPR422 24 ±12 ±30 8 45 50 15 67
HPR423 24 ±15 ±25 8 45 50 15 69
NOTE: Other input to output voltages may be available. Please consult factory.
Product: www.cdpoweronline.com
VOLTAGE VOLTAGE CURRENT NO LOAD RATED LOAD CURRENT EFFICIENCY
HPR4XX REV G 1/03
1
Page 2
SPECIFICATIONS, ALL MODELS
Specifications are at TA = +25°C nominal input voltage unless otherwise specified.
PARAMETER CONDITIONS MIN TYP MAX UNITS
INPUT
Voltage Range 4.5 5 5.5 VDC
10.8 12 13.2 VDC
13.5 15 16.5 VDC
21.6 24 26.4 VDC
OUTPUT
Rated Power 750 mW
Voltage Setpoint Accuracy Rated Load, Nominal V
IN
Ripple & Noise BW = DC to 10MHz 45 mVp-p
BW =10Hz to 2MHz 30 mVrms
HPR403 BW = DC to 10MHz 90 mVp-p
Voltage (Over Input Voltage Range) 1mA Load, V
1mA Load, V
1mA Load, V
= 5V 7 VDC
OUT
= 12V 15 VDC
OUT
= 15V 18 VDC
OUT
Temperature Coefficent .01 %/°C
REGULATION
Line Regulation High Line to Low Line 1 %/%Vin
Load Regulation (5V out only) Rated Load to 1mA Load 10 %
Load Regulation (All other modes) Rated Load to 1mA Load 3 %
GENERAL
ISOLATION
Rated Voltage 1000 VDC
Test Voltage 60 Hz, 60 Seconds 3000 Vpk
Resistance 10 GΩ
Capacitance 15 pF
Leakage Current V
= 240VAC, 60Hz 2 7 µArms
ISO
Switching Frequency 170 kHz
Frequency Change Over Line and Load 24 %
Package Weight 2g
MTTF per MIL-HDBK-217, Rev. E* Circuit Stress Method
Ground Benign TA = +25°C 7.9 MH r
TEMPERATURE
Specification -25 +25 +85 °C
Operation -40 +100 °C
Storage -40 +110 °C
* For demonstrated MTTF results reference: Power Convertibles Reliability Report HPR105.
GENERAL OUTPUT INPUT
±5 %
ABSOLUTE MAXIMUM RATINGS
Internal Power Dissipation .................................450mW
ShortCircuitDuration ........................................... Momentary
Lead Temperature (soldering, 10 seconds max .+300°C *
* NOTE: Refer to Reflow Profile for SMD Models.
Product: www.cdpoweronline.com
HPR4XX REV G 1/03
ORDERING INFORMATION
HPR 4XX
Device Family
HPR Indicates DC/DC Converter
Model Number
Selected from Table of Electrical Characteristics
2
Page 3
TYPICAL PERFORMANCE CURVES
Specifications are at TA = +25°C nominal input voltage, nominal load, recommended external components applied, unless
otherwise specified. (Refer to Application Note DCAN-9 at www.cdpowerelectronics.com)
VOUT VS LOAD
(5Vout Models)
5.7
5.5
5.3
Vout
5.1
4.9
0 40 120 160
80
Output Current (mA) Output Current each load (mA) Output Current each load (mA)
5.4
5.2
5.0
VoutFrequency (KHz)
4.8
4.6
020406080
VOUT VS LOAD
(±5Vout Models)
VOUT VS LOAD
12.5
(12Vout Models)
12.4
12.3
12.2
Vout
12.1
12.0
11.9
020406080
VOUT VS LOAD
12.6
(±12Vout Models)
12.5
12.4
12.3
Vout
12.2
12.1
12.0
010203040
Output Current each load (mA)
EFFICIENCY VS LOAD
90
75
60
45
30
Efficiency (%)
15
0
20
0
60
40 80
% of Rated Load (%)
100
VOUT VS LOAD
(15Vout Models)
15.9
15.7
15.5
Vout
15.3
Vout
15.1
14.9
020406080 0
Output Current each load (mA) Output Power each load (Watts)
OSCILLATION FREQUENCY VS
TEMPERATURE
220
200
180
160
140
-30 0 30 60 90
Temperature (°C)
16.5
16.0
15.5
15.0
14.5
14.0
13.5
VOUT VS LOAD
(±15Vout Models)
0.2
0.4 0.6 0.8 1.0
LOAD CAPACITANCE vs INPUT RISE TIME
600
500
400
300
200
Total Load Capacitance (uF)
100
0
0 5 10 15 20 25 30 35 40 45 50
90
80
70
60
50
40
30
20
Total Load Capacitance (uF)
10
0
0 5 10 15 20 25 30 35 40 45 50
(5 Vout models)
Rise Time of Input Voltage (mS)
LOAD CAPACITANCE vs INPUT RISE TIME
(12 Vout models)
Rise Time of Input Voltage (mS)
Product: www.cdpoweronline.com
SAFE OPERATING AREA
SAFE OPERATING AREA
SAFE OPERATING AREA
NOTES:
1.) When operated within the SAFE OPERATING AREA as defined
2.) For dual output models, total load capacitance is the sum of the
HPR4XX REV G 1/03
LOAD CAPACITANCE vs INPUT RISE TIME
60
50
40
30
20
Total Load Capacitance (uF)
10
0
0 5 10 15 20 25 30 35 40 45 50
(15 Vout models)
SAFE OPERATING AREA
Rise Time of Input Voltage (mS)
by the above curves, the output voltage of HPR4XX devices is
guaranteed to be within 95% of its steady-state value within 100
milliseconds after the input voltage has reached 95% of its steadystate value.
capacitances on the plus and minus outputs.
3
Page 4
MECHANICAL
FRONT
VIEW
BOTTOM
VIEW
0.77±0.010"
(19.56±0.25)
1
2
0.02±0.002"
(0.51±0.05)
765
0.18±0.015"
(4.57±0.38)
0.400±0.010"
(10.16±0.25)
0.140"
MIN
(3.56)
0.240±0.010"
(6.09±0.25)
0.020±0.010"
(0.51±0.25)
PIN CONNECTIONS
1. +VIN
2. -VIN
5. -VOUT
6. COM*
7. +VOUT
*Common pin not present on
single output models.
RIGHT
SIDE
VIEW
0.010±0.002"
(0.25±0.05)
0.035±0.015"
(0.89±0.38)
Notes:
All dimensions are in inches (millimeters).
GRID: 0.100 inches (2.54 millimeters)
PIN PLACEMENT TOLERANCE: ± 0.015"
Power Electronics Division, Americas
3400 E Britannia Drive, Tucson, Arizona 85706
Tel: 800.547.2537 Fax: 520.295.4197
Any data, prices, descriptions or specifications presented herein are subject to revision by C&D Technologies, Inc. without notice. While such information is believed to
be accurate as indicated herein, C&D Technologies, Inc. makes no warranty and hereby disclaims all warranties, express or implied, with regard to the accuracy or
completeness of such information. Further, because the product(s) featured herein may be used under conditions beyond its control, C&D Technologies, Inc. hereby
disclaims all warranties, either express or implied, concerning the fitness or suitability of such product(s) for any particular use or in any specific application or arising
from any course of dealing or usage of trade. The user is solely responsible for determining the suitability of the product(s) featured herein for user’s intended purpose
and in user’s specific application. C&D Technologies, Inc. does not warrant or recommend that any of its products be used in any life support or aviation or aerospace
applications.
Product: www.cdpoweronline.com
HPR4XX REV G 1/03
T el: +44 (0)1908 615232 Fax: +44 (0)1908 617545
C&D Technologies, EMEA/AP
Milton Keynes MK14 5BU UK
4
Loading...