Datasheet HCF4040B, HCF4024B, HCF4020B Datasheet (SGS Thomson Microelectronics)

RIPPLE-CARRY BINARY COUNTER/DIVIDERS

4020B - 14 STAGE
4024B - 7 STAGE
4040B - 12 STAGE

.MEDIUM-SPEED OPERATION

.FULLYSTATIC OPERATION

.COMMON RESET

.BUFFERED INPUTSANDOUTPUTS

.QUIESCENT CURRENT SPECIFIED TO 20V

FOR HCC DEVICE

.STANDARDIZED SYMMETRICALOUTPUT

.CHARACTERISTICS

.5V, 10V,AND 15V PARAMETRIC RATINGS

.INPUT CURRENT OF 100nA AT 18V AND

25°C FORHCC DEVICE

.100% TESTEDFOR QUIESCENTCURRENT

.MEETSALLREQUIREMENTSOFJEDECTEN-

TATIVE STANDARD No. 13A, ”STANDARD
SPECIFICATIONS FOR DESCRIPTION OF ”B”
SERIESCMOS DEVICES”

HCC4020B/24B/40B

HCF4020B/24B/40B

EY

(Plastic Package)

M1

(MicroPackage)

ORDER CODES :

HCC40XXBF HCF40XXBM1
HCF40XXBEY HCF40XXBC1

(Ceramic Package)

(PlasticChipCarrier)

F

C1

DESCRIPTION

The HCC4XXXB (extended temperature range)
and HCF4XXXB (intermediate temperature range)
are monolithic integrated circuits, available in 14­lead dual in-line for 4024B and 16-lead dual in-line
for 4020B, 4040B plasticor ceramic package and
plasticmicropackage.

PIN CONNECTIONS

4020B 4024B 4040B

TheHCC/HCF4020B, 4024B,and4040B areripple-
carry binary counters.Allcounter stagesare master­slaveflip-flops. The stateof a counter advances one
count onthe negative transition of eachinputpulse ;
a high levelon the RESET lineresets thecounter to
itsallzeros stage. Schmitt trigger action onthe input­pulse line permits unlimited clock rise and fall times.
Allinputs and outputs arebuffered.

March 1989

1/11

HCC/H FC4020B/24B/40B

FUNCTIONAL DIAGRAMS

4020B

4024B

4040B

ABSOLUTE MAXI MUM RATIN GS

Symbol Parameter Value Unit

* Supply Voltage : HCC Types

V

DD

HCF Types

V

Input Voltage – 0.5 to VDD+ 0.5 V

I

DC Input Current (any one input) ± 10 mA

I

I

P

Total Power Dissipation (per package)

tot

Dissipation per Output Transistor
for T

T

Operating Temperature : HCC Types

op

= Full Package-temperature Range

op

HCF Types

T

Stresses above those listed under ”Absolute Maximum Ratings” may cause permanent damage to the device. This is a stress
rating only and functional operation of the device at these or any other conditions above those indicated in the operational sec­tions of this specification is not implied. Exposure to absolute maximum rating conditions for external periods may affect device
reliability.

*

Allvoltage valuesarerefered to VSSpinvoltage.

Storage Temperature – 65 to + 150 °C

stg

– 0.5 to + 20
– 0.5 to + 18

200
100

– 55 t o + 125

–40to+85

V
V

mW
mW

°C
°C

RECOMMENDED OPERATING CONDITIONS

Symbol Parameter Value Unit

V

T

2/11

Supply Voltage :HCC Types

DD

HCF Types

V

Input Voltage 0 to V

I

Operating Temperature : HCC Types

op

HCF Types

3to18
3to15

DD

– 55 t o + 125

–40to+85

V
V

V

°C
°C

LOGIC DIAGRAMS

4020B

4040B

HCC/HCF4020B/24B/40B

4024B

3/11

HCC/H FC4020B/24B/40B

STATIC ELECTRICAL CHARACTERISTICS (over recommended operating conditions)

Test Conditions Valu e

Symbol Parameter

I

Quiescent

L

Current

HCC
Types

HCF
Types

V

OH

Output High
Voltage

V

OL

Output Low
Voltage

V

IH

Input High
Voltage

V

IL

Input Low
Voltage

I

OH

Output
Drive
Current

HCC
Types

HCF
Types

I

OL

Output
Sink
Current

HCC
Types

HCF
Types

I

IH,IIL

Input
Leakage
Current

HCC
Types

HCF
Types

C

Input Capacitance Any Input 5 7.5 pF

I

*T

=–55°CforHCC device : – 40°CforHCF device.

Low

*T

=+125°C for HCC device : + 85°C for HCF device.

High

TheNoiseMarginfor both ”1” and”0” levelis : 1V min.withVDD=5V, 2V min. withVDD= 10V,2.5 V min.with VDD= 15V.

V

V

O

|IO|V

I

(V) (V) (µA) (V)

T

DD

* 25°CT

Low

Min. Max. Min. Ty p. Ma x. Min. Max.

High

0/ 5 5 5 0.04 5 150
0/10 10 10 0.04 10 300
0/15 15 20 0.04 20 600
0/20 20 100 0.08 100 3000
0/ 5 5 20 0.04 20 150
0/10 10 40 0.04 40 300
0/15 15 80 0.04 80 600
0/ 5 < 1 5 4.95 4.95 4.95
0/10 < 1 10 9.95 9.95 9.95
0/15 < 1 15 14.95 14.95 14.95

5/0 < 1 5 0.05 0.05 0.05
10/0 < 1 10 0.05 0.05 0.05
15/0 < 1 15 0.05 0.05 0.05

0.5/4.5 < 1 5 3.5 3.5 3.5
1/9 < 1 10 7 7 7

1.5/13.5 < 1 15 11 11 11

4.5/0.5 < 1 5 1.5 1.5 1.5
9/1 < 1 10 3 3 3

13.5/1.5 < 1 15 4 4 4
0/ 5 2.5 5 – 2 – 1.6 – 3.2 – 1.15
0/ 5 4.6 5 – 0.64 – 0.51 – 1 – 0.36
0/10 9.5 10 – 1.6 – 1.3 – 2.6 – 0.9
0/15 13.5 15 – 4.2 – 3.4 – 6.8 – 2.4
0/ 5 2.5 5 – 1.53 – 1.36 – 3.2 – 1.1
0/ 5 4.6 5 – 0.52 – 0.44 – 1 – 0.36
0/10 9.5 10 – 1.3 – 1.1 – 2.6 – 0.9
0/15 13.5 15 – 3.6 – 3.0 – 6.8 – 2.4
0/ 5 0.4 5 0.64 0.51 1 0.36
0/10 0.5 10 1.6 1.3 2.6 0.9
0/15 1.5 15 4.2 3.4 6.8 2.4
0/ 5 0.4 5 0.52 0.44 1 0.36
0/10 0.5 10 1.3 1.1 2.6 0.9
0/15 1.5 15 3.6 3.0 6.8 2.4
0/18

Any Input

0/15 15 ± 0.3 ±10

18 ± 0.1 ±10–5± 0.1 ± 1

–5

± 0.3 ± 1

Unit

*

µA

V

V

V

V

mA

mA

µA

4/11

HCC/HCF4020B/24B/40B

DYNAMIC ELECTRICAL CHARACTERISTICS (T

=25°C, CL= 50pF, RL= 200kΩ,

amb

typical temperature coefficient for all VDD= 0.3%/°C values, all input rise and fall time = 20ns).

Symbol Paramet e r

INPUT-PULSE OPERATION

t

PLH,tPHL

Propagation Delay Time
(Ø to Q1 Out)

t

PLH,tPHL

t

TL H,tTHL

t

t

r,tf

f

max

Propagation Delay Time
Qn to Q

n+1

Transition Time 5 100 200

Minimum Input Pulse Width 5 70 140

W

Input Pulse Rise and Fall Time 5

Maximum Clock Input Frequency 5 3.5 7

RESET OPERATION

t

PHL

t

t

rem

Propagation Delay Time 5 140 280

Minimum Reset Pulse Width 5 100 200

W

Reset Removal Time 5 175 350

Test Conditions

V

(V) Min. Typ. Ma x.

DD

5180360
10 80 160
15 65 130

5100200
10 40 80
15 30 60

10 50 100
15 40 80

10 30 60
15 20 40

10
15

10 8 16
15 12 24

10 60 120
15 50 100

10 40 80
15 30 60

10 75 150
15 50 100

Value

Unlimited µs

Unit

ns

ns

ns

ns

MHz

ns

ns

ns

5/11

HCC/H FC4020B/24B/40B

Minimum Output Low (sink)Current
Characteristics.

Minimum Output High (source) Current
Characteristics.

Typical Output Low (source) Current
Characteristics.

Typical Output High (sink)Current
Characteristics.

Details of TypicalFlip-flop Stage.

6/11

HCC/HCF4020B/24B/40B

Plastic DIP16 (0.25) MECHANICAL DATA

DIM.

MIN. TYP. MAX. MIN. TYP. MAX.

a1 0.51 0.020

B 0.77 1.65 0.030 0.065

b 0.5 0.020

b1 0.25 0.010

D 20 0.787
E 8.5 0.335

e 2.54 0.100

e3 17.78 0.700

F 7.1 0.280

I 5.1 0.201

L 3.3 0.130

Z 1.27 0.050

mm inch

P001C

7/11

HCC/H FC4020B/24B/40B

Ceramic DIP16/1 MECHANICAL DATA

DIM.

MIN. TYP. MAX. MIN. TYP. MAX.

A 20 0.787
B 7 0.276
D 3.3 0.130
E 0.38 0.015

e3 17.78 0.700

F 2.29 2.79 0.090 0.110
G 0.4 0.55 0.016 0.022
H 1.17 1.52 0.046 0.060

L 0.22 0.31 0.009 0.012
M 0.51 1.27 0.020 0.050
N 10.3 0.406

P 7.8 8.05 0.307 0.317

Q 5.08 0.200

mm inch

8/11

P053D

HCC/HCF4020B/24B/40B

SO16 (Narrow) MECHANICAL DATA

DIM.

MIN. TYP. MAX. MIN. TYP. MAX.

A 1.75 0.068
a1 0.1 0.2 0.004 0.007
a2 1.65 0.064

b 0.35 0.46 0.013 0.018

b1 0.19 0.25 0.007 0.010

C 0.5 0.019

c1 45° (typ.)

D 9.8 10 0.385 0.393

E 5.8 6.2 0.228 0.244

e 1.27 0.050

e3 8.89 0.350

F 3.8 4.0 0.149 0.157

G 4.6 5.3 0.181 0.208

L 0.5 1.27 0.019 0.050

M 0.62 0.024

S8°(max.)

mm inch

P013H

9/11

HCC/H FC4020B/24B/40B

PLCC20 MECHANICAL DATA

DIM.

MIN. TYP. MAX. MIN. TYP. MAX.

A 9.78 10.03 0.385 0.395

B 8.89 9.04 0.350 0.356

D 4.2 4.57 0.165 0.180
d1 2.54 0.100
d2 0.56 0.022

E 7.37 8.38 0.290 0.330

e 1.27 0.050

e3 5.08 0.200

F 0.38 0.015
G 0.101 0.004
M 1.27 0.050

M1 1.14 0.045

mm inch

10/11

P027A

HCC/HCF4020B/24B/40B

Information furnished is believed to be accurate and reliable.However, SGS-THOMSON Microelectronics assumes no responsability for the
consequences of use of such information nor for any infringementofpatents or other rights of third parties which may results from its use. No
license isgrantedby implication orotherwiseunder any patentorpatent rights ofSGS-THOMSONMicroelectronics. Specificationsmentioned
in this publication are subject to changewithout notice. This publication supersedes and replaces all information previously supplied.
SGS-THOMSON Microelectronicsproductsare notauthorized foruse ascritical componentsin life supportdevices orsystems withoutexpress
written approval of SGS-THOMSON Microelectonics.

 1994 SGS-THOMSON Microelectronics - All RightsReserved

Australia - Brazil - France - Germany - Hong Kong - Italy - Japan - Korea - Malaysia - Malta - Morocco - The Netherlands -

Singapore - Spain - Sweden - Switzerland - Taiwan - Thailand - United Kingdom - U.S.A

SGS-THOMSON MicroelectronicsGROUPOF COMPANIES

11/11