Page 1
HI-SINCERITY
r
MICROELECTRONICS CORP.
H7809AA
H7809BA
3-TERMINAL POSITIVE VOLTAGE REGULATOR
Description
Spec. No. : HA200110
Issued Date : 1998.08.01
Revised Date : 2000.11.29
Page No. : 1/3
These regulators employ internal current-limiting and thermal-
TO-92
shutdown, making them essentially indestructible. They can deliver
up to 100mA output current. if the case temperature can keep in Tc=25°C.
They are intended as fixed voltage regulators in a wide range of applications including local
(on-card) regulation for elimination of noise and distribution problems associated with single-point
regulation. In addition, they can be used with power pass elements to make high-current voltage
regulators. The H7809_A used as a Zener diode/resistor combination replacement, offers an
effective output impedance improvement of typically two orders of magnitude, along with lower
quiescent current and lower noise.
Absolute Maximum Ratings (Ta=25°C)
• Input V oltage....................................................................................................................... 35 V
• Total Power Dissipation..................................................................................... Internally limited
• Operating Temperature Range .......................................................................... 0 °C to +125 °C
• Maximum Junction Temperature...................................................................................... 125 °C
• Storage Temperature Range........................................................................... -55 °C to +150 °C
• Lead Temperature (Soldering 10S).................................................................................. 260 °C
Typical Application Schematic Diagram
VoutVin
H7809_A
C1 C2
576Ω
3.41kΩ
3.89kΩ
Note:
C1 and C2 are required if regulator is
located far from power supply filte
and load, or oscillation may induced
on the loop.
H7809AA, 7809BA HSMC Product Specification
13kΩ
7.8kΩ
2.84kΩ
5kΩ
5.7kΩ
1.5kΩ
1.9kΩ
5pF
2.23kΩ
Gnd
Page 2
HI-SINCERITY
MICROELECTRONICS CORP.
Spec. No. : HA200110
Issued Date : 1998.08.01
Revised Date : 2000.11.29
Page No. : 2/3
Electrical Characteristics
Vin=15V, Iout=40mA, 0°C≤Tj≤125°C, Cin=0.33uF, Cout=0.1uF (unless otherwise noted)
Symbol Parameter Conditions
Tj=25°C
Vo Output Voltage
1mA≤Io≤70mA
1mA≤Io≤40mA and
11.5V≤Vin≤24V
∆Vo
∆Vo
Line Regulation
Load Regulation
IQ Quiescent Current
∆IQ
Quiescent Current
Change
Vn Output Noise Voltage
∆Vin / ∆Vout
Isc
Ripple Rejection
Peak Output /
Short Circuit Current
VD Dropout Voltage
Tj=25°C, 11.5V≤Vin≤24V
Tj=25°C, 13V≤Vin≤24V
Tj=25°C, 1mA≤Io≤40mA
Tj=25°C, 1mA≤Io≤100mA
Tj=25°C
1mA≤Io≤40mA
11.5V≤Vin≤24V
Ta=25°C, 10Hz≤f≤10KHz
15V≤Vin≤25V, f=120Hz
Tj=25°C
Tj=25°C
H7809AA
Units
Min Typ Max
8.73 9 9.27
8.55 - 9.45
V
8.55 - 9.45
- - 200
- - 150
--45
--90
mV
mV
--5.5mA
--0.1
--1.5
mA
-70-uV
38 44 - dB
- 140 - mA
-1.7- V
Symbol Parameter Conditions
Tj=25°C
Vo Output Voltage
1mA≤Io≤70mA
1mA≤Io≤40mA and
11.5V≤Vin≤24V
∆Vo
∆Vo
Line Regulation
Load Regulation
IQ Quiescent Current
∆IQ
Quiescent Current
Change
Vn Output Noise Voltage
∆Vin / ∆Vout
Isc
Ripple Rejection
Peak Output /
Short Circuit Current
VD Dropout Voltage
Tj=25°C, 11.5V≤Vin≤24V
Tj=25°C, 13V≤Vin≤24V
Tj=25°C, 1mA≤Io≤40mA
Tj=25°C, 1mA≤Io≤100mA
Tj=25°C
1mA≤Io≤40mA
11.5V≤Vin≤24V
Ta=25°C, 10Hz≤f≤10KHz
15V≤Vin≤25V, f=120Hz
Tj=25°C
Tj=25°C
H7809BA
Units
Min Typ Max
8.55 9 9.45
8.5 - 9.5
V
8.5 - 9.5
- - 200
- - 150
--45
--90
mV
mV
--5.5mA
--0.1
--1.5
mA
-70-uV
38 44 - dB
- 140 - mA
-1.7- V
H7809AA, 7809BA HSMC Product Specification
Page 3
HI-SINCERITY
g
A
MICROELECTRONICS CORP.
TO-92 Dimension
Spec. No. : HA200110
Issued Date : 1998.08.01
Revised Date : 2000.11.29
Page No. : 3/3
C
α2
A
B
31
2
α3
D
H
I
α1
G
Marking:
HSMC Logo
Part Number
Date Code
HSMC Logo
Part Number
Style: Pin 1.Output 2.Ground 3.Input
Product Series
Rank
Laser Mark
Product Series
Ink Mark
E
DIM
F
Inches Millimeters Inches Millimeters
Min. Max. Min. Max.
3-Lead TO-92 Plastic Package
HSMC Packa
e Code:
DIM
*: Typical
Min. Max. Min. Max.
A 0.1704 0.1902 4.33 4.83 G 0.0142 0.0220 0.36 0.56
B 0.1704 0.1902 4.33 4.83 H - *0.1000 - *2.54
C 0.5000 - 12.70 - I - *0.0500 - *1.27
D 0.0142 0.0220 0.36 0.56
E-*0.0500 - *1.27
F 0.1323 0.1480 3.36 3.76
Notes: 1.Dimension and tolerance based on our Spec. dated Apr. 25,1996.
2.Controlling dimension: millimeters.
3.Maximum lead thickness includes lead finish thickness, and minimum lead thickness is the minimum thickness of base material.
4.If there is any question with packing specification or packing method, please contact your local HSMC sales office.
Material:
• Lead: 42 Alloy ; solder plating
• Mold Compound: Epoxy resin family, flammability solid burning class: UL94V-0
α1
α2
α3
-
-
-
*5°
*2°
*2°
-
-
-
*5°
*2°
*2°
Important Notice:
• All rights are reserved. Reproduction in whole or in part is prohibited without the prior written approval of HSMC.
• HSMC reserves the right to make changes to its products without notice.
• HSMC semiconductor products are not warranted to be suitable for use in Life-Support Applications, or systems.
• HSMC assumes no liability for any consequence of customer product design, infringement of patents, or application assistance.
Head Office And Factory:
• Head Office (Hi-Sincerity Microelectronics Corp.): 10F.,No. 61, Sec. 2, Chung-Shan N. Rd. Taipei Taiwan R.O.C.
Tel : 886-2-25212056 Fax : 886-2-25632712, 25368454
• Factory 1: No. 38, Kuang Fu S. Rd., Fu-Kou Hsin-Chu Industrial Park Hsin-Chu Taiwan. R.O.C
Tel: 886-3-5983621~5 Fax: 886-3-5982931
H7809AA, 7809BA HSMC Product Specification
Loading...