Datasheet H7806BM, H7806AM Datasheet (HSMC)

Page 1
HI-SINCERITY
A
MICROELECTRONICS CORP.
H7806AM H7806BM
Description
Spec. No. : HM200104 Issued Date : 2001.10.01 Revised Date : 2001.10.11 Page No. : 1/3
The H7806_M series of surface mount device regulators are easy-to-use
SOT-89
devices suitable for multitude of applications that require a regulated supply of up to 100mA. These regulators feature internal current limiting and thermal shutdown making them remarkably rugged. No external components are required with the H7806_M devices in many applications. These devices offer a substantial performance advantage over the traditional zener diode resistor combination, as output impedance and quiescent current are substantially reduced.
Wide Range Of Available, Fixed Output Voltages
Internal Short-Circuit Current Limiting
Internal Thermal Overload Protection
No External Components Required
Absolute Maximum Ratings (Ta=25°C)
Input Voltage...................................................................................................................................... 35 V
Total Power Dissipation................................................................................................... Internally limited
Operating Temperature Range ........................................................................................ 0 °C to +125 °C
Maximum Junction Temperature.................................................................................................... 125 °C
Storage Temperature Range......................................................................................... -55 °C to +150 °C
Lead Temperature (Soldering 10S)................................................................................................ 260 °C
Typical Application Schematic Diagram
Vin
VoutVin
H7806_M
5.7K
3.41K
3.89K
576
13K
7.8K
2.84K
C1 C2
common ground is required between the input and the output voltages. The input voltage must remain typically 2.0V above the output voltage even during the low point on the input ripple voltage. Note : C1 and C2 are required if regulator is located far from power supply filter and load, or oscillation may induced on the loop.
H7806AM, H7806BM HSMC Product Specification
5K
100
100
5pF
1.5K 1.9K
2.23K
Vout
GND
Page 2
HI-SINCERITY
MICROELECTRONICS CORP.
Electrical Characteristics
Vin=12V, Io=40mA, 0°C ≤Tj≤125°C PD750mW, unless otherwise specified
Spec. No. : HM200104 Issued Date : 2001.10.01 Revised Date : 2001.10.11 Page No. : 2/3
Symbol Characteristic
Output Voltage (Tj=25°C)
Vo
Regline
Regload
IB IB RR
VI-Vo
VN Isc
Imax
TCVo Average Temperature Coefficient of Outpt Voltage, Io=5mA - -0.5 -
Output Voltage (8V≤Vin≤20V, 1mA≤Io≤40mA) Output Voltage (8V≤Vin≤30V, 1mA≤Io≤70mA) Line Regulation (Tj=25°C, 8V≤Vin≤20V) Line Regulation (Tj=25°C, 9V≤Vin≤20V) Load Regulation (Tj=25°C, 1mA≤Io≤100mA) Load Regulation (Tj=25°C, 1mA≤Io≤40mA) Quiescent Current (Tj=25°C) Quiescent Current Change (Tj=25°C, 8V≤Vin≤20V) Quiescent Current Change (Tj=25°C, 1mA≤Io≤40mA) Ripple Rejection (9V≤Vin≤19V, f=120Hz) Dropout Voltage (Tj=25°C) Output Noise Voltage (Tj=25°C, 10Hz≤f≤100KHz) Short Circuit Current Limit (Tj=25°C, Vin=35V) Peak Output Current (Tj=25°C)
H7806AM
Min Typ Max
5.82 6 6.18
5.76 6 6.24
5.76 6 6.24
- 55 150
- 45 100
-1070
-535
-25.5mA
--1.5
--0.1
40 - - dB
-1.7- V
- 50 100 uV
- 140 - mA
- 140 - mA
Units
V
mV
mV
mA
mV/°C
Symbol Characteristic
Output Voltage (Tj=25°C)
Vo
Regline
Regload
IB IB RR
VI-Vo
VN Isc
Imax
TCVo Average Temperature Coefficient of Outpt Voltage, Io=5mA - -0.5 -
Output Voltage (8V≤Vin≤20V, 1mA≤Io≤40mA) Output Voltage (8V≤Vin≤30V, 1mA≤Io≤70mA) Line Regulation (Tj=25°C, 8V≤Vin≤20V) Line Regulation (Tj=25°C, 9V≤Vin≤20V) Load Regulation (Tj=25°C, 1mA≤Io≤100mA) Load Regulation (Tj=25°C, 1mA≤Io≤40mA) Quiescent Current (Tj=25°C) Quiescent Current Change (Tj=25°C, 8V≤Vin≤20V) Quiescent Current Change (Tj=25°C, 1mA≤Io≤40mA) Ripple Rejection (9V≤Vin≤19V, f=120Hz) Dropout Voltage (Tj=25°C) Output Noise Voltage (Tj=25°C, 10Hz≤f≤100KHz) Short Circuit Current Limit (Tj=25°C, Vin=35V) Peak Output Current (Tj=25°C)
H7806BM
Min Typ Max
5.766.3
5.68 6 6.36
5.68 6 6.36
- 55 175
- 45 125
- 10 100
-550
-26mA
--1.6
--0.1
40 - - dB
-1.7- V
- 50 120 uV
- 140 - mA
- 140 - mA
Units
V
mV
mV
mA
mV/°C
H7806AM, H7806BM HSMC Product Specification
Page 3
HI-SINCERITY
MICROELECTRONICS CORP.
SOT-89 Dimension
Spec. No. : HM200104 Issued Date : 2001.10.01 Revised Date : 2001.10.11 Page No. : 3/3
Marking:
C
B
D
321
E
H
Date Code
6
7HM80
Laser Marking
Style : Pin 1.Vout 2.Ground 3.Vin
I
F
G
A
3-Lead SOT-8 9 Plastic Surface Mounted Package
HSMC Package Code: M
DIM
A 0.1732 0.1811 4.40 4.60 F 0.0583 0.0598 1.48 1.52 B 0.1594 0.1673 4.05 4.25 G 0.1165 0.1197 2.96 3.04 C 0.0591 0.0663 1.50 1.70 H 0.0551 0.0630 1.40 1.60 D 0.0945 0.1024 2.40 2.60 I 0.0138 0.0161 0.35 0.41 E 0.0141 0.0201 0.36 0.51
Notes: 1.Dimension and tolerance based on our Spec. dated May. 05,1996.
2.Controlling dimension: millimeters.
3.Maximum lead thickness includes lead finish thickness, and minimum lead thickness is the minimum thickness of base material.
4.If there is any question with packing specification or packing method, please contact your local HSMC sales office.
Material:
Lead: 42 Alloy ; solder plating
Mold Compound: Epoxy resin family, flammability solid burning class: UL94V-0
Inches Millimeters Inches Millimeters
Min. Max. Min. Max.
DIM
Min. Max. Min. Max.
*: Typical
Important Notice:
All rights are reserved. Reproduction in whole or in part is prohibited without the prior written approval of HSMC.
HSMC reserves the right to make changes to its products without notice.
HSMC semiconductor products are not warranted to be suitable for use in Life-Support Applications, or systems.
HSMC assumes no liability for any consequence of customer product design, infringement of patents, or application assistance.
Head Office And Fac tory:
Head Office (Hi-Sincerity Microelectronics Corp.): 10F.,No. 61, Sec. 2, Chung-Shan N. Rd. Taipei Taiwan R.O.C. Tel: 886-2-25212056 Fax: 886-2-25632712, 25368454
Factory 1: No. 38, Kuang Fu S. Rd., Fu-Kou Hsin-Chu Industrial Park Hsin-Chu Taiwan. R.O.C Tel: 886-3-5983621~5 Fax: 886-3-5982931
H7806AM, H7806BM HSMC Product Specification
Loading...