HI-SINCERITY
MICROELECTRONICS CORP.
H7806AJ
H7806BJ
3-TERMINAL POSITIVE VOLTAGE REGULAT OR
Description
Spec. No. : HJ200207
Issued Date : 1998.08.01
Revised Date : 2002.08.09
Page No. : 1/3
The H7806_J series of three-t erminal positive regul ators are available
TO-252
in the TO-252 package. These regulators can provide local on-card
regulation, eliminating the distribution problems associated with single point regulation. Each
employs internal c urrent limi ting , thermal shut-dow n and s afe operating area pro tection, making it
essen-tially indestructible. If adequate heat sinking is provided, they can deliver over 1A output
current. Although designed primarily as fixed voltage regulators, these devices can be used with
external components to obtain adjustable voltages and currents.
H7805_J is characterized for operation from 0°C to +125°C, and if operating temperature is
always high, please refer to the power dissipation curve.
Absolute Maximum Ratings (Ta=25°C)
• Input Voltage ....................................................................................................................... 35 V
• Total Power Dissipation (TC=25°C).................................................................. Internally limited
• Operating Junction Temperature....................................................................... 0 °C to +125 °C
• Storage Temperature Range.......................................................................... -55 °C to +150 °C
• Output Current (TC=25°C).................................................................................................... 1 A
• Lead Temperature (Soldering 10S) ................................................................................. 230 °C
Typical Application Schematic Diagram
Input
H7806_J
C1 C2
Note:
VoutVin
6.3V
30K
3.4K
200
1.9K
26
20pF
10K
1K
200
2K
0.3
Output
VREF
26
4K
C1 and C2 are required if regulator is
located far from power supply filter
4K
and load, or oscillation m ay induced
on the loop.
H7806AJ, H7806BJ HSMC Product Specification
1.2
12.1K
1K
GND
HI-SINCERITY
MICROELECTRONICS CORP.
Electrical Characteristics
Vin=11V, Io=500mA, 0°C≤Tj≤125°C (unless otherwise noted)
Spec. No. : HJ200207
Issued Date : 1998.08.01
Revised Date : 2002.08.09
Page No. : 2/3
Symbol Parameter Conditions
Vo Output Voltage
Tj=25°C
PD≤15W, 5mA≤Io≤1A
∆Vo
∆Vo
Line Regulation
Load Regulation
IQ Quiescent Current
∆IQ
Quiescent Current
Change
Vn Output Noise Voltage
RR Ripple Rejection
VD Dropout Voltage
Isc Short Circuit Current
Ipk Peak Output Current
∆Vo / ∆T
Average Tc of Vout
Tj=25°C, 8V≤Vin≤21V
Tj=25°C, 9V≤Vin≤21V
5mA≤Io≤1A
250mA≤Io≤750mA
Io≤1A, Tj=25°C
5mA≤Io≤1A
9V≤Vin≤25V
Ta=25°C, 10Hz≤f≤100KHz
9V≤Vin≤19V, f=120Hz
Tj=25°C, Io=1A
Tj=25°C
Tj=25°C
0°C≤Tj≤+125°C, Io=5mA
Symbol Parameter Conditions
Vo Output Voltage
Tj=25°C
PD≤15W, 5mA≤Io≤1A
∆Vo
∆Vo
Line Regulation
Load Regulation
IQ Quiescent Current
∆IQ
Quiescent Current
Change
Vn Output Noise Voltage
RR Ripple Rejection
VD Dropout Voltage
Isc Short Circuit Current
Ipk Peak Output Current
∆Vo / ∆T
Average Tc of Vout
Tj=25°C, 8V≤Vin≤21V
Tj=25°C, 9V≤Vin≤21V
5mA≤Io≤1A
250mA≤Io≤750mA
Io≤1A, Tj=25°C
5mA≤Io≤1A
9V≤Vin≤25V
Ta=25°C, 10Hz≤f≤100KHz
9V≤Vin≤19V, f=120Hz
Tj=25°C, Io=1A
Tj=25°C
Tj=25°C
0°C≤Tj≤+125°C, Io=5mA
H7806AJ
Min Typ Max
5.82 6 6.18
5.82 6 6.18
-460
-1.625
- - 100
--50
Units
V
mV
mV
-5.58 mA
--0.5
--1.3
mA
- - 200 uV
-68- dB
-2- V
-1.5- A
1.7 - - A
--0.8H7806BJ
Min Typ Max
5.75 6 6.25
5.75 6 6.25
- 5 120
-260
- - 120
--60
mV/°C
Units
V
mV
mV
-5.58 mA
--0.5
--1.3
mA
- - 300 uV
62 73 - dB
-2.5- V
-1.5- A
1.7 - - A
--0.8-
mV/°C
H7806AJ, H7806BJ HSMC Product Specification
HI-SINCERITY
MICROELECTRONICS CORP.
TO-252 Dimension
Spec. No. : HJ200207
Issued Date : 1998.08.01
Revised Date : 2002.08.09
Page No. : 3/3
A
B
L
F
G
C
D
Marking:
Date Code
HJ
870
6
Control Code
Style: Pin 1.Vin 2.Ground 3.Vout
3
H
E
K
2
I
1
J
3-Lead TO-252 Plastic Surface Mount Package
HSMC Package Code: J
*: Typical
DIM
Inches Millimeters Inches Millimeters
Min. Max. Min. Max.
DIM
Min. Max. Min. Max.
A 0.0177 0.0217 0.45 0.55 G 0.0866 0.1102 2.20 2.80
B 0.0650 0.0768 1.65 1.95 H - *0.0906 - *2.30
C 0.0354 0.0591 0.90 1.50 I - 0.0354 - 0.90
D 0.0177 0.0236 0.45 0.60 J - 0.0315 - 0.80
E 0.2520 0.2677 6.40 6.80 K 0.2047 0.2165 5.20 5.50
F 0.2125 0.2283 5.40 5.80 L 0.0551 0.0630 1.40 1.60
Notes: 1.Dimension and tolerance based on our Spec. dated May. 05,1996.
Material:
• Lead: 42 Alloy; solder plating
• Mold Compound: Epoxy resin family, flammability solid burning class: UL94V-0
2.Controlling dimension: millimeters.
3.Maximum lead thickness includes lead finish thickness, and minimum lead thickness is the minimum thickness of base material.
4.If there is any question with packing specification or packing method, please contact your local HSMC sales office.
Important Notice:
• All rights are reserved. Reproduction in whole or in part is prohibited without the prior written approval of HSMC.
• HSMC reserves the right to make changes to its products without notice.
• HSMC semiconductor products are not warranted to be suitable for use in Life-Support Applications, or systems.
• HSMC assumes no liability for any consequence of customer product design, infringement of patents, or application assistance.
Head Office And Factory:
• Head Office (Hi-Sincerity Microelectronics Corp.): 10F.,No. 61, Sec . 2, Chung-Shan N. Rd. Taipei Taiwan R.O.C.
Tel: 886-2-25212056 Fax: 886-2-25632712, 25368454
• Factory 1: No. 38, Kuang Fu S. Rd., Fu-Kou Hsin-Chu Industrial Park Hsin-Chu Taiwan. R.O.C
Tel: 886-3-5983621~5 Fax: 886-3-5982931
H7806AJ, H7806BJ HSMC Product Specification
Loading...