Datasheet H12WD4890 Specification

Download

Page 1

H1 SERIES | H12WD

PANEL MOUNT

PRODUCT SELECTION

Features

• Ratings from 25A to 125A @ 48-660 VAC

• Low off-state leakage current (snubberless)

• SCR output for heavy industrial loads

• Zero Voltage or instantaneous turn-on outputs

• UL/CSA/VDE Approved, CE Compliant to EN60950-1

• Improved SEMS screw and washer

• Redesigned housing with anti-rotation barriers

• DC control

• Direct bond copper substrate

• EMC Compliant to Level 3

• Direct power lead frame

• Epoxy free design

For Generation 3 datasheet click here

Control Voltage

4-32 VDC

ORDERING OPTIONS

H1 2WD 48 25 K P G H -10

Serires

Transient Overvoltage

2WD: 1200 Vpk

Operating Voltage

48: 48-660 VAC

Rated Load Current

25: 25 Amps 90: 90 Amps 50: 50 Amps 125: 125 Amps 75: 75 Amps

Termination

Blank: Screw F: Quick Connect (Up to 50 Amps only) (1) K: Hex standoffs (2)

Overvoltage Protection

Blank: Not Included P: Included (3)

Input Status LED

Blank: Not Included G: Included

Thermal Pad

Blank: Not Included H: Included

Switching Type

Blank: Zero Voltage Turn-On

-10: Instantaneous Turn-On (4)

25A

H12WD4825

50A

H12WD4850

75A

H12WD4875

Required for valid part number For options only and not

required for valid part number

90A

H12WD4890

Note: Not all part number combinations are available. Contact Crydom Technical support for information on the availability of a specific part number.

125A

H12WD48125

Page 1

www.sensata.com

Page 2

OUTPUT SPECIFICATIONS

(5)

Operating Voltage (47-440Hz) [Vrms] 48-660 48-660 48-660 48-660 48-660 Transient Overvoltage [Vpk] 1200 1200 1200 1200 1200 Maximum Off-State Leakage Current @ Rated Voltage [mArms] 1.0 1.0 1.0 1.0 1.0 Minimum Off-State dv/dt @ Maximum Rated Voltage [V/µsec] 500 500 500 500 500 Maximum Load Current [Arms] (6)(3) 25 50 75 90 125 Minimum Load Current [mArms] 150 150 150 150 150 Maximum 1 Cycle Surge Current (50/60Hz) [Apk] 239/250 597/625 954/1000 1145/1200 1670/1750 Maximum On-State Voltage Drop @ Rated Current [Vrms] 1.15 1.15 1.15 1.15 1.15 Thermal Resistance Junction to Case (Rjc) [°C/W] 0.8 0.45 0.3 0.27 0.22 Maximum 1/2 Cycle I² t for Fusing (50/60Hz) [A² sec] 285/259 1779/1621 4555/4150 6560/5976 13950/12709 Minimum Power Factor (at Maximum Load) (7) 0.5 0.5 0.5 0.5 0.5

INPUT SPECIFICATIONS

(5)

Description DC Control

125A90A75A50A25ADescription

Control Voltage Range 4-32 VDC Minimum Turn-On Voltage (7) 4.0 VDC Must Turn-Off Voltage 1 .0 VDC Maximum Reverse voltage -32 VDC Minimum Input Current 7 mADC Maximum Input Current 12 mADC Nominal Input Impedance Current Regulated Maximum Turn-On Time [msec] (8) 1/2 Cycle Maximum Turn-Off Time [msec] 1/2 Cycle

GENERAL SPECIFICATIONS

(5)

Description Parameters

Dielectric Strength, Input/Output/Base (50/60Hz) 4000 Vrms Minimum Insulation Resistance (@ 500 V DC)

Maximum Capacitance, Input/Output 8 pF Ambient Operating Temperature Range -40 to 80 °C Ambient Storage Temperature Range -40 to 125 °C Weight (typical) 2.6 oz (74.9 g) Housing Material 94 V-0 Baseplate Material Aluminum Input Terminal Screw Torque Range (in-lb/Nm) 13-15 /1.5-1.7 Load Terminal Screw Torque Range (in-lb/Nm) 18-20 / 2.0-2.2 SSR Mounting Screw Torque Range (in-lb/Nm) 18-20 / 2.0-2.2 Input/Load Terminal Screw Torque Range (in-lb/Nm)

(3) w/”K” option 8-10 / 0.9-1.13

Input/Output Terminal Screw Thread Size #6-32 UNC / #8-32 UNC Humidity per IEC60068-2-78 93% non-condensing LED Input Status Indicator w/”G” option (green)

MTBF (Mean Time Between Failures) at 40°C ambient temperature (9)

11,641,553 hours (1,328 years)

MTBF (Mean Time Between Failures) at 60°C ambient temperature (9)

Ohm

7,210,376 hours (823 years)

WIRING DIAGRAM

Load (10)

1 ( ) 2 ( )

OUTPUT

SOLI D ST AT E R ELA Y

INPUT

4 (–) 3 (+)

Terminals

Input

Output

Recommended Wire Sizes

Wire Size

(Solid / Stranded)

24 AWG (0.2 mm

2 x 12 AWG (3.3 mm

20 AWG (0.5 mm

2 x 10 AWG (5.3 mm

2 x 8 AWG (8.4 mm

) / 0.2 [minimum]

) / 0.518 [minimum]

) / 8.4 [maximum]

) / 3.3 [maximum]

) / 5.3

www.sensata.com

Wire Pull-Out

Strength (lb)[N]

10 [44.5]

90 [400]

30 [133]

110 [490]

90 [400]

Input Current vs Input Voltage

Standard Regulated DC Input

Input Current (mA)

0 5 10 15 20 25 30

DC Input Voltage

Page 2

Page 3

EQUIVALENT CIRCUIT BLOCK DIAGRAM

+DC

MECHANICAL SPECIFICATIONS

Tolerances: ±0.02 in / 0.5 mm All dimensions are in: inches [millimeters]

Screw Termination

1.1

1.88

[47.6]

[27.9]

0.49

[12.4]

OUTPUT

S OLID ST AT E RELA Y

INPUT

1.0

[25.4]

1.75

[44.5]

Mounting Hole/Slot

0.19 [4.9] DIA.

1.7

[43.2]

Current

Limiter

(11)

(5)

0.89

[22.6]

2.25

[57.3]

Trigger Circuit

1.88

[47.6]

(12)

Hex Standoff Termination (“K” Option)

1.1

[27.9]

0.49

[12.4]

OUTPUT

S OLID ST AT E RELA Y

INPUT

1.0

[25.4]

1.75

[44.5]

Mounting Hole/Slot

0.19 [4.9] DIA.

[43.2]

1.70

(3)

1.04

[26.4]

0.93

[23.6]

(4 places)

1.0

[25.4]

(2 places)

2.25

[57.3]

Quick Connect Termination (“F” Option) - Up to 25 Amp (2)

Mounting Hole/Slot

0.19 [4.9] DIA.

1.88

[47.6]

1.58

[40.2]

0.49

[12.4]

OUTPUT

S OLID ST AT E RELA Y

INPUT

1.40

[35.6]

1.75

[44.5]

Faston Terminal(13)

0.25 x 0.032

(2 places)

Faston Terminal(13)

1.7

[43.2]

0.187 x 0.020

(2 places)

1.31

[33.4]

1.25

[31.8]

2.25

[57.3]

Quick Connect Termination (“F” Option) - Up to 50 Amp (2)

Faston Terminal(13)

[11.4]

(2 places)

Faston Terminal(13)

0.25 x 0.032

(4 places)

0.45

1.7

[43.2]

0.187 x 0.020

(2 places)

Mounting Hole/Slot

0.19 [4.9] DIA.

1.88

[47.6]

1.58

[40.2]

0.63

[16.0]

OUTPUT

S OLID ST AT E RELA Y

INPUT

0.49

[12.4]

1.40

[35.6]

1.75

[44.5]

1.31

[33.4]

2.25

[57.3]

1.25

[31.8]

Page 3

www.sensata.com

Page 4

SURGE CURRENT INFORMATION

250

200

150

100

Surge Current (Amp)

0.01 0.1 1 10

900 800 700 600 500 400 300 200

Surge Current (Amp)

100

0.01 0.1 1 10

Non repetitive peak surge current at Tj initial 40ºC.

25 A

Surge Duration (Secs)

75 A

Surge Duration (Secs)

1800 1600 1400 1200 1000

800 600 400

Surge Current (Amp)

200

0.01 0.1 1 10

600

500

400

300

200

100

Surge Current (Amp)

125 A

Surge Duration (Secs)

50 A

0.01 0.1 1 10

Surge Duration (Secs)

90 A

1200

1050

900

750

600

450

300

Surge Current (Amp)

150

0.01 0.1 1 10

Surge Duration (Secs)

THERMAL DERATE INFORMATION

25 A

1.5ºC/W

Load Current (Amps)

20 30 40 50 60 70 80

2ºC/W

Ambient Temperature (ºC)

Load Current (Amps)

3ºC/W

90 A

0.5ºC/W

90 80 70 60 50 40 30 20 10

20 30 40 50 60 70 80

0.7ºC/W

Ambient Temperature (ºC)

50 A

0.7ºC/W

Load Current (Amps)

20 30 40 50 60 70 80

1ºC/W

1.5ºC/W

Ambient Temperature (ºC)

1.5ºC/W

2ºC/W

0.5ºC/W

Load Current (Amps)

20 30 40 50 60 70 80

125 A

0.5ºC/W

120

100

Load Current (Amps)

20 30 40 50 60 70 80

0.7ºC/W

Ambient Temperature (ºC)

75 A

0.7ºC/W

Ambient Temperature (ºC)

1ºC/W

1.5ºC/W

Page 4

www.sensata.com

Page 5

AGENCY APPROVALS

Designed in accordance with the requirements of IEC 62314 IEC 61000-4-2 : Electrostatic Discharge – Level 3 IEC 61000-4-4 : Electrically Fast Transients – Level 3 IEC 61000-4-5 : Electrical Surges – Level 3 IEC 600068-2-6: Vibration 0.33mm and 0.75mm Amplitude over 10-55 Hz IEC 600068-2-27: Shock Resistance 15g/11ms

E116949 (25, 50, 75 and 90A) E116950 (125A) LR81689 10143 UG

ACCESORIES

Protective Cover & Hardware Kits

Recommended Accessories

Protective Cover

Part number: KS101

Clear plastic cover compatible with all new S1 designs. Safety covers provide added protection from electric shock when installing or checking equipment.

Hardware Kit

Part number: HK4

Bag with 2 square brass accessories and 2 screw 8-32 x 5/8 for output. Used to mount TMR1 lug terminals.

Cover Hardware

Kit

KS101 HK1

HK4

Heat Sink

Part No.

HS501DR

HS301 / HS301DR

HS251

HS202 / HS202DR

HS201 / HS201DR

HS172

HS151 / HS151DR

HS122 / HS122DR

HS103 / HS103DR

HS101

HS073

HS072

HS053

HS033

HS023

Thermal Resistance

[ºC/W]

5.0

3.0

2.5

2.0

1.7

1.5

1.2

1.0

0.7

0.5

0.36

0.25

Lug Terminal Thermal Pad

TRM1

TRM6

HSP-1

HSP-2

GENERAL NOTES

(1)

Single pair (up to 25A) Double pair* (50A model only). *Caution: User must connect to both pairs

(2) Option “K” is designed and tested for use with printed circuit boards or ring/fork terminals having a thickness between 0.031 and 0.093 inches (0.79 to 2.36 mm), and loads rated up to 50 Amps.

For higher load currents, the “K” standoff temperature must not exceed 105°C. For additional application assistance please contact Crydom Technical Support.

(3)

utput will self trigger between 900-1200Vpk, Min. power factor 0.7 or higher, not suitable for capacitive loads.

(4) Instantaneous turn-on version is not recomended for capacitive loads. Use zero turn-on only. (5)

All parameters at 25°C unless otherwise speciﬁed.

(6) Heat sinking required, see derating curves. (7) Increase minimum voltage by 1V for operations from -20 to -40°C. (8) Turn-on time for Instantaneous turn-on versions is 0.02 msec.

(9)

All parameters at 50% power rating and 100% duty cycle (contact Crydom tech support for detailed report).

(10)

Load can be wired to either SSR output terminal 1 or 2.

(11) Elective Input Status LED, “G” option. (12) Elective Overvoltage Protection, “P” option. (13)

Mechanical dimensions vary from G3 models.

For additional information or speciﬁc questions, contact Crydom Technical Support.

Page 5

www.sensata.com

Page 6

WARNINGS

RISK OF MATERIAL DAMAGE AND HOT ENCLOSURE

• The product’s side panels may be hot, allow the product to cool before touching

• Follow proper mounting instructions including torque values

• Do not allow liquids or foreign objects to enter this product

Failure to follow these instructions can result in serious injury, or equipment damage.

HAZARD OF ELECTRIC SHOCK, EXPLOSION OR ARC FLASH

• Disconnect all power before installing or working with this

equipment

• Verify all connections and replace all covers before turning on

power

Failure to follow these instructions will result in death or serious injury

Sensata Technologies, Inc. (“Sensata”) data sheets are solely intended to assist designers (“Buyers”) who are developing systems that incorporate Sensata products (also referred to herein as “components”). Buyer understands and agrees that Buyer remains responsible for using its independent analysis, evaluation and judgment in designing Buyer’s systems and products. Sensata data sheets have been created using standard laboratory conditions and engineering practices. Sensata has not conducted any testing other than that speciﬁcally described in the published documentation for a particular data sheet. Sensata may make corrections, enhancements, improvements and other changes to its data sheets or components without notice. Buyers are authorized to use Sensata data sheets with the Sensata component(s) identiﬁed in each particular data sheet. HOWEVER, NO OTHER LICENSE, EXPRESS OR IMPLIED, BY ESTOPPEL OR OTHERWISE TO ANY OTHER SENSATA INTELLECTUAL PROPERTY RIGHT, AND NO LICENSE TO ANY THIRD PARTY TECHNOLOGY OR INTELLECTUAL PROPERTY RIGHT, IS GRANTED HEREIN. SENSATA DATA SHEETS ARE PROVIDED “AS IS”. SENSATA MAKES NO WARRANTIES OR REPRESENTATIONS WITH REGARD TO THE DATA SHEETS OR USE OF THE DATA SHEETS, EXPRESS, IMPLIED OR STATUTORY, INCLUDING ACCURACY OR COMPLETENESS. SENSATA DISCLAIMS ANY WARRANTY OF TITLE AND ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, QUIET ENJOYMENT, QUIET POSSESSION, AND NON-INFRINGEMENT OF ANY THIRD PARTY INTELLECTUAL PROPERTY RIGHTS WITH REGARD TO SENSATA DATA SHEETS OR USE THEREOF. All products are sold subject to Sensata’s terms and conditions of sale supplied at www.sensata.com SENSATA ASSUMES NO LIABILITY FOR APPLICATIONS ASSISTANCE OR THE DESIGN OF BUYERS’ PRODUCTS. BUYER ACKNOWLEDGES AND AGREES THAT IT IS SOLELY RESPONSIBLE FOR COMPLIANCE WITH ALL LEGAL, REGULATORY AND SAFETY-RELATED REQUIREMENTS CONCERNING ITS PRODUCTS, AND ANY USE OF SENSATA COMPONENTS IN ITS APPLICATIONS, NOTWITHSTANDING ANY APPLICATIONS-RELATED INFORMATION OR SUPPORT THAT MAY BE PROVIDED BY SENSATA. Mailing Address: Sensata Technologies, Inc., 529 Pleasant Street, Attleboro, MA 02703, USA.

Rev. 021218 ECN 20395 FDE-07-01 Rev. B

Page 6

Americas

+1 (877) 502 5500 – Option 2 sales.crydom@sensata.com

Europe, Middle East & Africa

+44 (1202) 416170 ssr-info.eu@sensata.com

Asia Paciﬁc

sales.isasia@list.sensata.com

China +86 (21) 2306 1500 Japan +81 (45) 277 7117 Korea +82 (31) 601 2004 India +91 (80) 67920890 Rest of Asia +886 (2) 27602006

ext 2808