
GX4314L Low Power, Wideband
4 x 1 Video Multiplexer
DATA SHEET
FEATURES
• low power; 12 mA ON current at
±5 volts
• low differential gain and phase
• wide bandwidth; 100 MHz at -1 dB
±4.5 to ±11 volt power supplies
•
• available in 14 pin PDIP as well as 14 and 16
pin SOIC packaging
• identical functions and pin outs to GX4314 with lower
power
FUNCTIONAL BLOCK DIAGRAM
IN 0
IN 1
IN 2
IN 3
X
X
X
X
X
OUTPUT
DESCRIPTION
The GX4314L is a low power, wideband video multiplexer
implemented in bipolar technology. This device is characterized
by excellent differential gain and phase in the enabled
state, very high off-isolation in the disabled state and a
fully buffered, unilateral signal path.
Make-before-break switching assures virtually glitch-free
switching. The GX4314L features a very high, nearly constant
input impedance coupled with high output impedance in
the disabled state. This allows multiple devices to be
paralleled at the inputs and outputs without additional
circuitry.
Logic inputs are TTL and 5 V CMOS compatible, providing
address and chip select functions. The operation of the
device is described in the Truth Table below.
The GX4314L offers pin for pin compatibility with Gennum's
other 4x1 multipliers such as GX414, GX414A and GX434
with greatly improved bandwidth and slew rate. Since the
GX4314L is capable of operation at ±5 V supplies, system
power can be reduced.
Typically, the ON current is only 12 mA while the chip
disabled current drops to less than 260 µA. This feature
allows the use of many devices in high density situations
without excessive power dissipation.
2 TO 4 DECODER LOGIC
A0
A1
TRUTH TABLE
CS A1 A0 Output
0 0 0 Input 0
0 0 1 Input 1
0 1 0 Input 2
0 1 1 Input 3
1 X X High - Z
X = don't care
Revision Date: February 1994
CHIP
SELECT
CS
APPLICATIONS
• Multimedia
• Computer graphics.
• Very high density video switching.
• PCM / data routing.
ORDERING INFORMATION
Part Number Package Type Temperature Range
GX4314LCDB 14 pin PDIP 0
GX4314LCKB 14 pin SOIC 0
GX4314LCKC 16 pin SOIC 0
o
C to 70oC
o
C to 70oC
o
C to 70oC
GX4314LCTC Tape16 pin SOIC 0oC to 70oC
Document No. 520 - 54 - 2
GENNUM CORPORATION P.O. Box 489, Stn A, Burlington, Ontario, Canada L7R 3Y3 tel. (905) 632-2996 fax: (905) 632-5946
Gennum Japan Corporation:C-101 Miyamae Village, 2-10-42 Miyamae, Suginami-ku Tokyo 168-0081, Japan tel. (03) 3334-7700 fax: (03) 3247-8939

ABSOLUTE MAXIMUM RATINGS
PIN CONNECTIONS
Parameter Value
Supply Voltage ±13.5V
Operating Temperature Range 0°C ≤ TA ≤ 70° C
Storage Temperature Range -65°C ≤ T
≤ 150° C
S
Lead Temperature (Soldering, 10 Sec) 260° C
Analog Input Voltage (VEE - 1.4) or -7.5<VA< (Vcc+ 0.3)
or ( VEE+ 15) V
Logic Input Voltage -0.5V ≤ VL ≤ +5.5V
ELECTRICAL CHARACTERISTICS
V
= ±8 V DC, 0°C ≤ TA ≤ 70°C, RL = 10kΩ, C
S
PARAMETER SYMBOL CONDITIONS MIN TYP MAX UNITS
Supply Voltage ±V
DC I
␣ SUPPLY Supply Current
Analog Output Voltage Swing V
STATIC Analog Input Bias Current I
Output Offset Voltage V
Output Offset Voltage Drift ∆V
Chip Enable Time t
LOGIC Chip Disable Time t
␣ Logic Input Thresholds V
Logic Input Current I
+
-
I
+
I
-
I
BIAS
ON
OFF
V
L
S
OUT
OS
OS
IH
IL
Insertion Loss I.L. 1V p-p sine or sq. wave at 100 kHz 0.035 0.047 0.060 dB
Bandwidth (-3dB) B.W. Small signal CL = 0 pF - 200 - MHz
Frequency Response At -1 dB flattened, R
␣ DYNAMIC
Input Resistance R
Input Capacitance C
Output Resistance R
Output Capacitance C
IN
IN
OUT
OUT
Differential Gain dg At 3.58 MHz - - 0.03 %
Differential Phase dp At 3.58 MHz - - 0.02 deg
All Hostile Crosstalk XTLKAH30 MHz R
Chip Disabled Crosstalk XTLKCDAt 100 MHz - 80 - dB
GX4314L
IN 0
GND
IN 1
GND
IN 2
GND
IN 3
14 PIN DIP &
14 PIN NARROW
IN 0
V
CC
GND
A0
IN 1
A1
GND
CS
IN 2
OUT
GND
NC
IN 3
V
EE
NC
SOIC
= 30 pF, unless otherwise shown
L
16 PIN WIDE SOIC
V
CC
NC
A0
A1
CS
OUT
NC
V
EE
Operating Range ±4.5 - ±11 V
CS = 0 - 12 15 mA
CS = 0 - 12 15 mA
CS = 1 - 270 350 µA
CS = 1 - 350 600 µA
Extremes before clipping occurs -2.4 - +3.6 V
-5 - µA
T
= 25°C -10 -3 +4 mV
A
-1560µV/°C
Enable input to appearance of signal - 350 500 ns
Enable input to disappearance 0.6 1.0 - µs
of signal at output.
V
= 1 2.0 - - V
IH
V
= 0 - - 0.8 V
IL
-- 4 µA
= 27Ω 100 - - MHz
S
Chip enabled 1.0 - - MΩ
Chip enabled - 1.5 - pF
Chip enabled - 18 - Ω
Chip enabled - - 5 pF
= 10Ω 70 - - dB
IN
520 - 54 - 2
Slew Rate +SR VIN = 1V p-p (C
-SR VIN =1V p-p (C
Gain Spread at 30 MHz ∆A
Crosspoint Scatter R
V
= 75 Ω T
S
ƒ = 3.58 MHz 0oC< TA< 70
2
= 10 pF) 600 900 - V/µs
L
= 10 pF) 225 300 - V/µs
L
- - ±0.05 dB
o
= 25
C- - ±0.15 deg
A
o
C- - ±0.25 deg

TYPICAL PERFORMANCE CURVES FOR GX4314L
(V
= ±5V DC, TA ≤ 25°C, C
S
= 30 pF, unless otherwise shown.)
L
0.2
R
0.1
0.0
-0.1
-0.2
-0.3
-0.4
GAIN (dB)
-0.5
-0.6
-0.7
-0.8
1 10 80
C
=27Ω
S
=30pF
L
FREQUENCY (MHz)
Fig. 1 Flattened Frequency Response
2.0
1.9
1.8
1.7
1.6
1.5
1.4
1.3
CAPACITANCE (pF)
1.2
1.1
1.0
1 10 100 200
DISABLED
ENABLED
CL=0pF
FREQUENCY (MHz)
Fig. 3 Input Capacitance
-20
-40
-60
R
=75Ω
IN
-80
-100
ISOLATION & XTALK (dB)
-120
1 10 100
R
=10Ω
IN
FREQUENCY (MHz)
Fig. 2 All Hostile Crosstalk & Isolation
4.5
4.4
4.3
4.2
4.1
4.0
3.9
3.8
CAPACITANCE (pF)
3.7
3.6
3.5
-1.0 -0.8 -0.6 -0.4 -0.2 0.0 0.2 0.4 0.6 0.8 1.0
V
=±11.5V
S
V
S
=±4.5V
BIAS VOLTAGE (V)
Fig. 4 Output Capacitance
CHIP OFF ISOLATION
R
=10Ω
L
0.030
0.025
0.020
0.015
0.010
0.005
dg ( % ), dp ( deg )
0.000
-0.005
-0.010
1 3 5 10
dg
dp
FREQUENCY (MHz)
Fig. 5 Differential Gain & Phase
VIDEO IN 0
VIDEO IN 1
VIDEO IN 2
VIDEO IN 3
3
GX4314 L
1
75
75
75
75
All resistors in ohms. all capacitors
in microfarads unless otherwise stated.
2
3
4
5
6
7
14
+8V
13
12
11
10
9
8
-8V
Fig. 6 Test Circuit
NC
0.1
0.1
10k
A0
A1
CS
4
CLC110
0.1
0.1
+5V
VIDEO
OUT
1
8
5
-5V
520 - 54 - 2

VIDEO INPUTS
GX4314L SWITCHES
0.1
+5V
BINARY ADDRESS
DECODER
V 0
V 1
V 2
V 3
V 4
V 5
V 6
V 7
V 8
V 9
V 10
V 11
1
IN 0
2
GND
3
IN 1
4
GND
5
IN 2
6
GND
7
IN 3
75
75
75
75
75
75
75
75
75
75
75
75
0.1
1
IN 0
2
GND
3
IN 1
4
GND
5
IN 2
6
GND
7
IN 3
0.1
1
IN 0
2
GND
3
IN 1
4
GND
5
IN 2
6
GND
7
IN 3
0.1
0.1
0.1
0.1
+V
A 0
A 1
CS
OUT
NC
-V
+V
A 0
A 1
CS
OUT
NC
-V
+V
A 0
A 1
CS
OUT
NC
14
13
12
11
10
9
8
4
-5V
+5V
14
13
12
11
10
9
8
330
-5V
+5V
14
13
12
11
10
9
8
-V
2-10pF
300
500
100
1
5
6
7
74HC139
8
2
16
+5V
3
7
+
2
6
4
-
250
A 0
A 1
3
A 2
2
A 3
1
ENABLE
+5V
0.1
75
VIDEO
OUTPUT
0.1
0.1
-5V
-5V
+5V
CURRENT- FEEDBACK
OPAMP
1
V 12
V 13
V 14
V 15
75
75
75
75
IN 0
2
GND
3
IN 1
4
GND
5
IN 2
6
GND
7
IN 3
Fig. 7 16 x 1 Video Multiplexer Circuit
CAUTION
ELECTROSTATIC
SENSITIVE DEVICES
DO NOT OPEN PACKAGES OR HANDLE
EXCEPT AT A STATIC-FREE WORKSTATION
Gennum Corporation assumes no responsibility for the use of any circuits described herein and makes no representations that they are free from patent infringement.
520 - 54 - 2
0.1
+V
A 0
A 1
CS
OUT
NC
14
13
12
11
10
9
8
-V
All resistors in ohms. all capacitors
-5V
in microfarads unless otherwise stated.
DOCUMENT
IDENTIFICATION
PRODUCT PROPOSAL
This data has been compiled for market investigation purposes
only, and does not constitute an offer for sale.
ADVANCE INFORMATION NOTE
This product is in development phase and specifications are
subject to change without notice. Gennum reserves the right to
remove the product at any time. Listing the product does not
constitute an offer for sale.
PRELIMINARY DATA SHEET
The product is in a preproduction phase and specifications are
subject to change without notice.
DATA SHEET
The product is in production. Gennum reserves the right to make
changes at any time to improve reliability, function or design, in
order to provide the best product possible.
© Copyright June 1992 Gennum Corporation. All rights reserved. Printed in Canada.
4