Page 1
This document is GStek's confidential information. Anyone having confidential obligation to GStek shall keep this document confidential. Any unauthorized
disclosure or use beyond authorized purpose will be considered as violation of confidentiality and criminal and civil liability will be asserted.
High Performance Single Synchronous Buck Converter GS92A3
Features
Wide Input Voltage Range：3V~28V
General Description
The GS92A3 is small size chip with a relative
Adjustable 0.8V~20V Output Range
Wide output load range: 0 to 8A
±1% Output Voltage Accuracy over Line and
Load
Constant-on-time control scheme for fast
transient and high Efficiency
Programmable Operation Frequency from
100kHz to 600kHz
Integrated 18 mΩ at LDO=5V N-Channel
MOSFET For High Side
Integrated 9.5 mΩ at LDO=5V N-Channel
MOSFET For Low Side
Selectable Forced PWM or automatic
PFM/PWM mode
Under-Voltage Protection
Over-Voltage Protection
FB Short Protection
constant on-time synchronous buck switching
converter suitable for applications in notebook
computers and other battery operated portable
devices. Features include wide input voltage
range, high efficiency and fast dynamic response
The GS92A3 has a unique power save mode,
which can save battery power supply by
decreasing frequency when load current falls
down below preset critical current point.
The fast dynamic transient response means that
buck converter applications based on GS92A3
will provide about 100ns-order response to load
when output voltage falls down or rises up. The
frequency will increase or decrease to meet the
change in output load. Moreover, the GS92A3 will
take the same method to regulate the output
voltage when input voltage changes. When
Internal 5V Pre-regulator
External Adjustable Soft-Start and Soft-Stop
Over Temperature Protection
Programmable Over Current Protection
TQFN23-4x4 package
Green Product (RoHS, Lead-Free,
Halogen-Free Compliant)
Applications
Notebook computers
CPU core/IO Supplies
Chip/RAM Supplies
transient response regulated, the converter will
maintain a new steady-state operation. Both the
transient response state and the new state, the
GS92A3 always has the same on-time width.
The GS92A3 is suitable for the solutions which
have the output voltage between 0.8V and 20V.
An external setting resistor and output voltage
can set the on-time width, duty-cycle and
frequency for the converter. The integrated gate
drivers feature adaptive shoot-through protection,
fast signal transmission. Additional features
include current limit, soft-start, over-voltage and
under-voltage protection and soft discharge upon
shutdown. The GS92A3 is available in package
TQFN23-4x4.
Green Solution Technology Co., LTD.
Rev.:1.0 1 Nov-14
Loading...