Datasheet FST3245CW, FST3245WMX, FST3245WM, FST3245QSCX, FST3245QSC Datasheet (Fairchild Semiconductor)
...Page 1
© 1999 Fairchild Semiconductor Corporation DS500020 www.fairchildsemi.com
June 1997
Revised December 1999
FST3245 Octal Bus Switch
FST3245
Octal Bus Switch
General Description
The Fairchild Switch FST3245 provides 8-bits of highspeed CMOS TTL-compati ble bus switch ing in a standa rd
’245 pin-out. The low on resi stance of the switch allows
inputs to be connect ed to output s with out ad ding propag ation delay or generating additional ground bounce noise.
The device is organized as an 8-bit switch. When OE
is
LOW, the switch is ON and Port A i s connecte d to P ort B.
When OE
is HIGH, the switch is OPEN and a high-imped-
ance state exists between the two ports.
Features
■ 4Ω switch connection between two ports.
■ Minimal propagation delay through the switch.
■ Low l
CC
.
■ Zero bounce in flow-through mode.
■ Control inputs compatible with TTL level.
Ordering Code:
Devices also availab le in Tape and Reel. Specify by appending th e s uffix let t er “X” to the ordering code.
Logic Diagram
Pin Descriptions
Connection Diagram
Truth Table
Order Number Package Number Package Description
FST3245WM M20B 20-Lead Small Outline Integrated Circuit (SOIC), JEDEC MS-013, 0.300 Wide
FST3245QSC MQA20 20-Lead Quarter Size Outline Package (QSOP), JEDEC MO-137, 0.150 Wide
FST3245MTC MTC20 20-Lead Thin Shrink Small Outline Package (TSSOP), JEDEC MO-153, 4.4mm Wide
Pin Name Description
OE
Bus Switch Enable
ABus A
BBus B
Input OE Function
L Connect
H Disconnect
Page 2
www.fairchildsemi.com 2
FST3245
Absolute Maximum Ratings(Note 1) Recommended Operating
Conditions
(Note 3)
Note 1: The Absolute Maximum Ratings are those values beyond which
the safety of the dev ice cannot be guaranteed. T he device sh ould not be
operated at these limits. The parametric values defined in the Electrical
Characteristics tables are not guaranteed at the absolute maximum rating.
The “Recommend ed O peratin g Cond itions” t able w ill defin e the co ndition s
for actual device operation.
Note 2: The input and output negative volt age ratin gs may be exceede d if
the input and output diode current ratings are observed.
Note 3: Unused control inputs m ust be held HIGH o r LOW. They may no t
float.
DC Electrical Characteristics
Note 4: Typical values are at VCC = 5.0V and TA = +25°C
Note 5: Measured by th e v olt age drop between A and B pins at the indicated c urrent through the switc h. On resistance is det erm ined by the lower of the
voltages on the two (A or B) pins.
Supply Voltage (VCC) −0.5V to +7.0V
DC Switch Voltage (V
S
) −0.5V to +7.0V
DC Input Voltage (V
IN
) (Note 2) −0.5V to +7.0V
DC Input Diode Current (l
IK
) V
IN
< 0V −50mA
DC Output (I
OUT
) Sink Current 128mA
DC V
CC
/GND Current (ICC/I
GND
) +/− 100mA
Storage Temperature Range (T
STG
) −65°C to +150 °C
Power Supply Operating (V
CC
) 4.0V to 5.5V
Input Voltage (V
IN
)0V to 5.5V
Output Voltage (V
OUT
)0V to 5.5V
Input Rise and Fall Time (t
r
, tf)
Switch Control Input 0nS/V to 5nS/V
Switch I/O 0nS/V to DC
Free Air Operating Temperature (T
A
) −40 °C to +85 °C
Symbol Parameter
V
CC
(V)
TA = −40 °C to +85 °C
Units Conditions
Min
Typ
(Note 4)
Max
V
IK
Clamp Diode Voltage 4.5 −1.2 V IIN = −18 mA
V
IH
HIGH Level Input Voltage 4.0–5.5 2.0 V
V
IL
LOW Level Input Voltage 4.0–5.5 0.8 V
I
I
Input Leakage Current 5.5 ±1.0 µA0≤ VIN ≤ 5.5V
I
OZ
OFF-STATE Leakage Current 5.5 ±1.0 µA0 ≤A, B ≤ V
CC
R
ON
Switch On Resistance 4.5 4 7 Ω VIN = 0V, IIN = 64 mA
(Note 5) 4.5 4 7 Ω VIN = 0V, IIN = 30 mA
4.5 8 15 Ω VIN = 2.4V, IIN = 15 mA
4.0 11 20 Ω VIN = 2.4V, IIN = 15 mA
I
CC
Quiescent Supply Current 5.5 3 µAVIN = VCC or GND, I
OUT
= 0
∆ I
CC
Increase in I
CC
per Input 5.5 2.5 mA One input at 3.4V
Other inputs at VCC or GND
Page 3
3 www.fairchildsemi.com
FST3245
AC Electrical Characteristics
Note 6: This parameter is guaranteed by design but is not test ed. The bus switch contrib ut es no propagation delay other th an the RC delay of the typical On
resistance of the switc h and the 50pF load cap ac it ance, when driven by an ideal voltage the sourc e (z ero output impedan ce ).
Capacitance (Note 7)
Note 7: TA = +25°C, f = 1 MHz, Capacitance is characterized but not tested.
AC Loading and Waveforms
Note: Input driven by 50 Ω source terminated in 50 Ω
Note: C
L
includes load and stray capacitance
Note: Input PRR = 1.0 MHz t
W
= 500 ns
FIGURE 1. AC Test Circuit
FIGURE 2. AC Waveforms
Symbol Parameter
TA = −40 °C to +85 °C,
CL = 50pF, RU = RD = 500Ω
Units Conditions Figure No.
VCC = 4.5 – 5.5V VCC = 4.0V
Min Max Min Max
t
PHL,tPLH
Prop Delay Bus to Bus (Note 6) 0.25 0.25 ns VI = OPEN Figure 1
Figure 2
t
PZH
, t
PZL
Output Enable Time 1.5 5.9 6.4 ns VI = 7V for t
PZL
Figure 1
Figure 2
VI = OPEN for t
PZH
t
PHZ
, t
PLZ
Output Disable Time 1.5 6.0 5.7 ns VI = 7V for t
PLZ
Figure 1
Figure 2
VI = OPEN for t
PHZ
Symbol Parameter Typ Max Units Conditions
C
IN
Control Pin Input Capacitance 3 pF VCC = 5.0V
C
I/O
Input/Output Capacitance 5 pF VCC, OE = 5.0V
Page 4
www.fairchildsemi.com 4
FST3245
Physical Dimensions inches (millimeters) unless otherwise noted
20-Lead Small Outline Integrated Circuit (SOIC), JEDEC MS-013, 0.300 Wide
Package Number M20B
20-Lead Quarter Size Outline Package (QSOP), JEDEC MO-137, 0.150 Wide
Package Number MQA20
Page 5
5 www.fairchildsemi.com
FST3245
Physical Dimensions inches (millimeters) unless otherwise noted (Continued)
20-Lead Thin Shrink Small Outline Package (TSSOP), JEDEC MO-153, 4.4mm Wide
Package Number MTC20
Technology Description
The Fairchild Switch family derives from a nd embodies Fair child’s proven switch technolo gy used for severa l years in its
74LVX3L384 (FST3384) bus switch product.
Page 6
www.fairchildsemi.com 6
FST3245 Octal Bus Switch
Fairchild does not assume any responsibility for use of any circuitry described, no circuit pate nt licenses are implied and
Fairchild reserves the right at any time without notice to change said circuitry and specifications.
LIFE SUPPORT POLICY
FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT
DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT OF FAIRCHILD
SEMICONDUCTOR CORPORATION. As used herein:
1. Life support devices or systems are devices or syste ms
which, (a) are intended for surgical implant into the
body, or (b) support or sustain life, and (c) whose failure
to perform when properly used in accordance with
instructions for use provided in the labeling, can be reasonably expected to result in a significant inju ry to the
user.
2. A critical component i n any compon ent of a lif e support
device or system whose failu re to perform can be reasonably expected to ca use the fa i lure of the life su pp ort
device or system, or to affect its safety or effectiveness.
www.fairchildsemi.com
Loading...