Page 1
tm
FGH30N60LSD
FGH30N60LSD
July 2008
Features
• Low saturation voltage: V
• High Input Impedance
• Low Conduction Loss
Applications
=1.1V @ IC = 30A
CE(sat)
General Description
The FGH30N60LSD is a MOS gated high voltage switching
device combining the best features of MOSFETs and bipolar
transistors.This device has the high input impedance of a
MOSFET and the low on-state conduction loss of a bipolar
transistor.
• Solar Inverters
• UPS, Welder
E
C
G
COLLECTOR
(FLANGE)
G
G
C
C
E
E
Absolute Maximum Ratings
Symbol Description FGH30N60LSD Units
V
CES
V
GES
I
C
I
CM (1)
I
FSM
P
D
Operating Junction Temperature -55 to +150 °C
T
J
T
stg
T
L
Notes :
(1) Repetitive rating : Pulse width limited by max. junction temperature
Collector-Emitter Voltage 600 V
Gate-Emitter Voltage ± 20 V
Collector Current @ TC = 25°C60 A
Collector Current @ T
= 100°C30 A
C
Pulsed Collector Current 90 A
Non-repetitive Peak Surge Current
150 A
60Hz Single Half-Sine Wave
Maximum Power Dissipation @ TC = 25°C 480 W
Maximum Power Dissipation @ T
= 100°C 192 W
C
Storage Temperature Range -55 to +150 °C
Maximum Lead Temp. for soldering
Purposes, 1/8” from case for 5 seconds
300 °C
Thermal Characteristics
Symbol Parameter Typ. Max. Units
R
(IGBT) Thermal Resistance, Junction-to-Case -- 0.26 °C/W
θJC
(Diode) Thermal Resistance, Junction-to-Case -- 0.92 °C/W
R
θJC
R
θJA
©2006 Fairchild Semiconductor Corporation 1 www.fairchildsemi.com
FGH30N60LSD Rev. A2
Thermal Resistance, Junction-to-Ambient -- 40 °C/W
Page 2
Package Marking and Ordering Information
FGH30N60LSD
Max Qty
per Box
Device Marking Device Package
Packaging
Type Qty per Tube
FGH30N60LSD FGH30N60LSDTU TO-247 Tube 30ea -
Electrical Characteristics of the IGBT T
= 25°C unless otherwise noted
C
Symbol Parameter Test Conditions Min. Typ. Max. Units
Off Characteristics
BV
CES
∆B
VCES
∆T
J
I
CES
I
GES
On Characteristics
V
GE(th)
V
CE(sat)
Dynamic Characteristics
C
ies
C
oes
C
res
Collector-Emitter Breakdown Voltage VGE = 0V, IC = 250uA 600 -- -- V
/
Temperature Coefficient of Breakdown
Voltage
Collector Cut-Off Current VCE = V
G-E Leakage Current VGE = V
VGE = 0V, IC = 250uA
, VGE = 0V -- -- 250 uA
CES
, VCE = 0V -- -- ±250 nA
GES
-- 0.6 -- V/°C
G-E Threshold Voltage IC = 250uA, VCE = VGE 4.0 5.5 7.0 V
I
= 30A, VGE = 15V -- 1.1 1.4 V
Collector to Emitter
Saturation Voltage
Input Capacitance
Output Capacitance -- 245 -- pF
Reverse Transfer Capacitance -- 90 -- pF
C
= 30A, VGE = 15V,
I
C
T
= 125°C
C
I
= 60 A, VGE = 15V -- 1.3 -- V
C
-- 1.0 -- V
-- 3550 -- pF
V
= 30V, VGE = 0V,
CE
f = 1MHz
Switching Characteristics
t
d(on)
t
r
t
d(off)
t
f
E
E
t
d(on)
t
r
t
d(off)
t
f
E
E
Q
Q
Q
L
e
on
off
on
off
g
ge
gc
Turn-On Delay Time
Rise Time -- 46 -- ns
Turn-Off Delay Time -- 250 -- ns
Fall Time -- 1.3 2.0 us
Turn-On Switching Loss -- 1.1 -- mJ
Turn-Off Switching Loss -- 21 -- mJ
Turn-On Delay Time
Rise Time -- 45 -- ns
Turn-Off Delay Time -- 270 -- ns
Fall Time -- 2.6 -- us
Turn-On Switching Loss -- 1.1 -- mJ
Turn-Off Switching Loss -- 36 -- mJ
Total Gate Charge
Gate-Emitter Charge -- 30 -- nC
Gate-Collector Charge -- 105 -- nC
Internal Emitter Inductance Measured 5mm from PKG -- 7 -- nH
= 400 V, IC = 30A,
V
CC
R
= 6.8Ω, V
G
GE
Inductive Load, T
= 400 V, IC = 30A,
V
CC
R
=6.8Ω, V
G
Inductive Load, T
V
CE
V
GE
GE
= 300 V, IC = 30A,
= 15V
= 15V,
= 25°C
C
= 15V,
= 125°C
C
-- 18 -- ns
-- 17 -- ns
-- 225 -- nC
FGH30N60LSD Rev. A2
2 www.fairchildsemi.com
Page 3
FGH30N60LSD
Electrical Characteristics of the Diode T
= 25°C unless otherwise noted
C
Parameter Conditions Min. Typ. Max Units
V
FM
I
RM
t
rr
t
a
t
b
Q
rr
IF = 15A
I
= 15A
F
= 25 °C
T
C
T
= 125 °C
C
-
-
1.8
1.6
2.2
VR = 600V TC = 25 °C - - 100 µA
IF =1A, di/dt = 100A/µs, V
I
=15A, di/dt = 100A/µs, V
F
IF =15A, di/dt = 100A/µs, V
= 30V
CC
= 390V
CC
= 390V TC = 25 °C
CC
= 25 °C
T
C
T
= 25 °C
C
T
= 25 °C
C
T
= 25 °C
C
-
-
-
-
-
-
-
18
13
27.5
35
40
-
-
-
V
V
ns
ns
ns
ns
nC
FGH30N60LSD Rev. A2
3 www.fairchildsemi.com
Page 4
Typical Performance Characteristics
Figure 1.Typical Output Characteristics Figure 2. Typic al Satura tion Vo ltage
Characteristics
90
TC = 25oC
[A]
C
60
90
VGE = 20V
15V
12V
10V
8V
[A]
C
60
TC = 125oC
VGE = 20V
15V
12V
10V
8V
FGH30N60LSD
30
Collector Current, I
0
01234
Collector-Emitter Voltage, VCE [V]
30
Collector Current, I
0
01234
Collector-Emitter Voltage, VCE [V]
Figure 3. Typical Saturation Voltage Figure 4. Transfer characteristics
Ch ara cte ritic s
90
[A]
C
60
30
Collector Current, I
0
0123
Collector-Em itte r Vo lta g e , VCE [V]
Figure 5. Saturation Voltage vs. Case Figure 6. Saturation Voltage vs. Vge
Common Emitter
VGE = 15V
TC = 25oC
TC = 125oC
90
Common Emitter
VCE = 20V
TC = 25oC
TC = 125oC
[A]
C
60
30
Collector Current, I
0
024681012
Gate-Emitter Voltage,VGE [V]
Temperature at Variant Current Level
1.4
[V]
CE
1.2
Common Emitter
VGE = 15V
60A
20
[V]
16
CE
Common Emitter
TC = 25oC
1.0
0.8
Collector-Emitter Voltage, V
0.6
25 50 75 100 125
Collector-EmitterCase Temperature, TC [oC]
FGH30N60LSD Rev. A2
30A
IC = 15A
12
8
4
Collector-Emitter Voltage, V
0
30A
IC = 15A
60A
0 4 8 121620
Gate-Emitter Voltage, VGE [V]
4 www.fairchildsemi.com
Page 5
Typical Performance Characteristics (Continued)
FGH30N60LSD
Figure 7. Saturation Voltage vs. Vge Figure 8. Capacitance characteristics
20
16
[V]
CE
12
8
30A
60A
Common Emitter
TC = 125oC
13000
10000
C
ies
C
oes
1000
C
res
Capacitance [pF]
Common Emitter
VGE = 0V, f = 1MHz
TC = 25oC
4
Collector-Emitter Voltage, V
IC = 15A
0
0 4 8 12 16 20
Gate-Emitte r Voltage, VGE [V]
Figure 9. Gate Charge Characteristics Figure 10. SOA Characteeristics
15
Common Emitter
IC = 30A
TC = 25oC
12
[V]
GE
9
Vcc = 100V
300V
200V
100
50
0 5 10 15 20 25 30
Collector-Emitter Voltage, VCE [V]
300
Ic MAX (Pulsed)
100
Ic MAX (Continuous)
[A]
c
10
100µs
6
Single Nonrepetitive
3
Gate-Emitter Voltage, V
0
0 50 100 150 200 250
Gate Ch a r g e , Qg [nC]
1
Pulse TC = 25oC
Collector Current, I
Curves must be derated
linearly with increase
in temperature
0.1
0.1 1 10 100 1000
Collector-Emitter Voltage, VCE [V]
DC Operation
Figure 11. Load Current Vs. Frequency Figure 12. Turn-On Characteristics vs.
Gate Resistance
80
70
Vcc = 400V
load Current : peak of square wave
60
200
100
50µs
1ms
50
40
30
Load Current [A]
20
Duty cycle : 50%
10
Tc = 100
Powe Dissipation = 192W
0
0.1 1 10 100 1000
FGH30N60LSD Rev. A2
o
C
Frequency [kHz]
t
r
td(on)
Switching Time [ns]
10
0 1020304050
Gate Resistance, RG [Ω]
Common Emitter
VCC = 400V, VGE = 15V
IC = 30A
TC = 25oC
TC = 125oC
5 www.fairchildsemi.com
Page 6
Typical Performance Characteristics (Continued)
Figure 13. Turn-Off Characteristics vs. Figure 14. Turn-On Characteristics vs.
Gate Resistance Collector Current
3000
1000
t
f
500
Common Emitter
VGE = 15V, RG = 6.8Ω
TC = 25oC
TC = 125oC
100
t
r
FGH30N60LSD
t
d(off)
Switching Time [ns]
100
0 1020304050
Gate Resistance, RG [Ω]
Common Emitter
VCC = 400V, VGE = 15V
IC = 30A
TC = 25oC
TC = 125oC
Switching Time [ns]
10
20 30 40 50 60 70 80
Collector Current, IC [A]
Figure 15. Turn-Off Characteristics vs. Figure 16. Switching Loss vs
Collector Current Gate Resistance
1000
Switching Time [ns]
6000
t
f
Common Emitter
VGE = 15V, RG = 6.8Ω
t
d(off)
100
20 30 40 50 60 70 80
TC = 25oC
TC = 125oC
Collecto r C urrent, IC [A]
500
Common Emitter
VCC = 400V, VGE = 15V
IC = 30A
TC = 25oC
100
TC = 125oC
10
Switching Loss [mJ]
1
5 101520253035404550
Gate Resistance, RG [Ω]
E
Figure 17.Switching Loss vs Collector Current Figure 18. Turn-Off Switching
SOA Characteristics
100
200
t
d(on)
E
off
on
10
1
Switching Loss [mJ]
0.1
10 20 30 40 50 60 70 80
FGH30N60LSD Rev. A2
Common Emitter
VGE = 15V, RG = 6.8Ω
TC = 25oC
TC = 125oC
Collector Current, IC [A]
E
off
E
on
100
[A]
C
10
Collector Cu rre n t , I
Safe Operating Area
VGE = 15V, TC = 125oC
1
1 10 100 1000
Collector-Emitter Voltage, VCE [V]
6 www.fairchildsemi.com
Page 7
Figure 19. Transient Thermal Impedance of IGBT
1
0.5
0.1
0.2
0.1
0.05
0.01
Thermal Response [Zthjc]
0.02
0.01
single pulse
1E-3
1E-5 1E-4 1E-3 0.01 0.1 1 10
Rectangular Pulse Duration [sec]
P
DM
t
1
t
Duty Factor, D = t1/t2
Peak Tj = Pdm x Zthjc + T
2
C
Figure 20. Typical Forward Voltage Drop Figure 21. Typical Reverse Current
FGH30N60LSD
100
[A]
F
10
TC=125oC
1
TC=75oC
FPRWARD CURRENT, I
TC=25oC
0.1
0.0 0.4 0.8 1.2 1.6 2.0 2.4 2.8 3.2
FORWARD VOLTAGE, VF [V]
Figure 22. Typical Reverse Recovery Time
200
190
180
170
160
150
140
130
120
110
100
90
80
70
60
50
40
30
20
REVERSE RECOVERY TIME, trr [ns]
10
0
100 200 300 400 500
TC = 25oC
TC = 125oC
TC = 75oC
di/dt [A/µs]
IF = 15A
1E-4
1E-5
[A]
R
1E-6
1E-7
REVERSE CURRENT, I
1E-8
1E-9
0 100 200 300 400 500 600
TC = 125oC
TC = 75oC
TC = 25oC
REVERSE VOLTAGE, VR [V]
FGH30N60LSD Rev. A2
7 www.fairchildsemi.com
Page 8
Mechanical Dimensions
TO-247AB (FKS PKG CODE 001)
FGH30N60LSD
FGH30N60LSD Rev. A2
8 www.fairchildsemi.com
Page 9
TRADEMARKS
The following are registered and unregistered trademarks Fairchild Semiconductor owns or is authorized to use and is not
intended to be an exhaustive list of all such trademarks.
ACEx™
ActiveArray™
Bottomless™
Build it Now™
CoolFET™
CROSSVOLT™
DOME™
EcoSPARK™
2
E
CMOS™
EnSigna™
FACT™
®
FAST
FASTr™
FPS™
FRFET™
FACT Quiet Series™
GlobalOptoisolator™
GTO™
HiSeC™
2
I
C™
i-Lo™
ImpliedDisconnect™
IntelliMAX™
ISOPLANAR™
LittleFET™
MICROCOUPLER™
MicroFET™
MicroPak™
MICROWIRE™
MSX™
MSXPro™
Across the board. Around the world.™
The Power Franchise
®
OCX™
OCXPro™
OPTOLOGIC
®
OPTOPLANAR™
PACMAN™
POP™
Power247™
PowerEdge™
PowerSaver™
PowerTrench
QFET
®
®
QS™
QT Optoelectronics™
Quiet Series™
RapidConfigure™
RapidConnect™
µSerDes™
ScalarPump™
SILENT SWITCHER
SMART START™
SPM™
Stealth™
SuperFET™
SuperSOT™-3
SuperSOT™-6
SuperSOT™-8
SyncFET™
TCM™
TinyBoost™
TinyBuck™
TinyPWM™
TinyPower™
TinyLogic
®
TINYOPTO™
TruTranslation™
UHC™
Programmable Active Droop™
DISCLAIMER
FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO
IMPROVE RELIABILITY, FUNCTION OR DESIGN. FAIRCHILD DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE
OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS
OF OTHERS. THESE SPECIFICATIONS DO NOT EXPAND THE TERMS OF FAIRCHILD’S WORLDWIDE TERMS AND CONDITIONS, SPECIFICALLY
THE WARRANTY THEREIN, WHICH COVERS THESE PRODUCTS.
®
UniFET™
UltraFET
VCX™
Wire™
®
FGH30N60LSD
LIFE SUPPORT POLICY
FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT
THE EXPRESS WRITTEN APPROVAL OF FAIRCHILD SEMICONDUCTOR CORPORATION.
As used herein:
1. Life support devices or systems are devices or systems which,
(a) are intended for surgical implant into the body, or (b) support
or sustain life, or (c) whose failure to perform when properly used
in accordance with instructions for use provided in the labeling,
can be reasonably expected to result in significant injury to the
2. A critical component is any component of a life support device
or system whose failure to perform can be reasonably expected
to cause the failure of the life support device or system, or to affect
its safety or effectiveness.
user.
PRODUCT STATUS DEFINITIONS
Definition of Terms
Datasheet Identification Product Status Definition
Advance Information Formative or In
Design
This datasheet contains the design specifications for
product development. Specifications may change in
any manner without notice.
Preliminary First Production This datasheet contains preliminary data, and
supplementary data will be published at a later date.
Fairchild Semiconductor reserves the right to make
changes at any time without notice in order to improve
design.
No Identification Needed Full Production This datasheet contains final specifications. Fairchild
Semiconductor reserves the right to make changes at
any time without notice in order to improve design.
Obsolete Not In Production This datasheet contains specifications on a product
that has been discontinued by Fairchild semiconductor.
The datasheet is printed for reference information only.
FGH30N60LSD Rev. A2
Rev. I20
9 www.fairchildsemi.com
Loading...