Datasheet FES16BT, FES16AT, FES16JT, FES16HT, FES16GT Datasheet (Fairchild Semiconductor)

...
Page 1
Discrete POWER & Signal
FES16AT - FES16JT
FES16AT - FES16JT
Technologies
.185(4.70) .175(4.44)
Features
• Low forward voltage drop.
• High surge current capacity.
• High current capability.
• High reliability.
PIN 1 +
PIN 2 -
CASE Positive
PIN 1 -
PIN 2 +
CASE N egative
Suffix “R”
.113( 2.87) .103( 2.62)
+
CASE
+
.16(4.06) .14(3.56)
.037( 0.94) .027( 0.68)
.412( 10.5)
MAX
12
DIA
.154( 3.91)
.148( 3.74)
.594( 15.1)
.587( 14.91)
.56(14.22) .53(13.46)
.27(6.86) .23(5.84)
TO-220AC
.205( 5.20) .195( 4.95)
Dimensions are in:
inches (mm)
.025(0.64) .014(0.35)
16 Ampere Glass Passivated Super Fast Rectifiers
Absolute Maximum Ratings* T
Symbol Parameter Value Units
I
O
i
f(surge)
P
D
R
θ
JA
R
θ
JL
T
stg
T
J
*These ratings are limiting values above which the serviceability of any semiconductor device may be impaired.
Average Rectified Current
.375 " lead length @ T
Peak Forward Surge Current
8.3 ms single half-sine-wave Superimposed on rated load (JEDEC method)
Total Device Dissipation
Derate above 25°C
Thermal Resistan ce, Junction to Ambient 16 Thermal Resistance, Junction to Lead 1.2 Storage Temperature Range -65 to +150 Operating Junction Temperature -65 to +150
= 25°C unless otherwise noted
A
= 100°C
A
16 A
250 A
7.81 62
mW/°C
C/W
°
C/W
°
.11(2.79) .10(2.54)
W
C
°
C
°
.055(1.40) .045(1.14)
= 25°C unless otherwise noted
A
Parameter Device Units
16AT 16BT 16CT 16DT 16FT 16GT 16HT 16JT
Peak Repetitive Reverse Voltage 50 100 150 200 300 400 500 600 V Maximum RMS Voltage 35 70 105 140 210 280 350 420 V DC Blocking Voltage (Rated VR) Maximum Reverse Current
@ rated V
R
Maximum Rev erse Recovery Time
= 0.5 A, IR = 1.0 A, I
I
F
Maximum Forward Voltage @ 16.0A Typical Junction Capacitance
V
= 4.0. f = 1.0 MHz
R
1999 Fairchild Semiconductor Corporation
TA = 25°C
= 100°C
T
A
= 0.25 A
RR
50 100 150 200 300 400 500 600 V
10
500
35 50
0.975 1.3 1.5 V 170 145 pF
FES16AT - FES16JT, Rev. A
µ µ
nS
A A
Page 2
T ypical Characteristics
FES16AT - FES16JT
Forward Current Derating Curve
20
16
12
SINGLE PHASE HALF WAVE
8
60HZ RESISTIVE OR INDUCTIVE LOAD
4
.375" (9.0mm) LEAD
FORWARD CU RRENT (A)
LENGTHS
0
0 255075100125150175
AMBI ENT TEMPERATURE ( C)
º
Forward Charact eristics
100
FES16AT-FES16DT
10
FES16FT-FES16JT
1
0.1
FORWARD CURRENT (A)
0.01
0.4 0.6 0.8 1 1.2 1.4 1.6 1.8
FORWARD VOLTAGE (V)
º
T = 25 C
A
Pulse Width = 300µs 2% Duty Cycle
Non-Repetitive Surge Current
250
200
150
100
50
0
PEA K FORWARD SURG E CUR R EN T (A)
1 2 5 10 20 50 100
NUMBER OF CYCLES AT 60Hz
Reverse Characteristics
1000
µ
100
T = 100 C
º
A
10
º
T = 25 C
1
REVERSE CURRENT ( A)
0.1 0 20406080100120140
PER CENT OF R ATED PE AK REVERSE VO LT AGE (%)
A
300
250
200
50
Ω
NONINDUCTIVE
50V (approx)
Ω
50 NONINDUCTIVE
Ω
50 NONINDUCTIVE
DUT
150
100
FES16FT-FES16JT
CAPACITANCE (pF)
50
0
1 2 5 10 20 50 100
REVERSE VOLTAGE (V)
(-)
Pulse Generator (Note 2)
OSCILLOSCOPE (Note 1)
(+)
FES16AT- F E S 16D T
+0.5A
0
-0.25A
-1.0A
1.0cm SET TIME BASE FOR
trr
Reverse Recovery Time Characterstic and Test Circuit Diagram
Junction Capacitance
5/ 10 ns/ cm
FES16AT - FES16JT, Rev. A
Page 3
TRADEMARKS
The following are registered and unregistered trademarks Fairchild Semiconductor owns or is authorized to use and is not intended to be an exhaustive list of all such trademarks.
ACEx™ CoolFET™ CROSSVOLT™ E2CMOS
TM
FACT™ FACT Quiet Series™
®
FAST FASTr™ GTO™ HiSeC™
ISOPLANAR™ MICROWIRE™ POP™ PowerTrench™ QS™ Quiet Series™ SuperSOT™-3 SuperSOT™-6 SuperSOT™-8 TinyLogic™
DISCLAIMER
FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION OR DESIGN. FAIRCHILD DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS.
LIFE SUPPORT POLICY
FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used herein:
1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body, or (b) support or sustain life, or (c) whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in significant injury to the user.
2. A critical component is any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or
effectiveness.
PRODUCT STATUS DEFINITIONS Definition of Terms
Datasheet Identification Product Status Definition
Advance Information
Preliminary
No Identification Needed
Obsolete
Formative or In Design
First Production
Full Production
Not In Production
This datasheet contains the design specifications for product development. Specifications may change in any manner without notice.
This datasheet contains preliminary data, and supplementary data will be published at a later date. Fairchild Semiconductor reserves the right to make changes at any time without notice in order to improve design.
This datasheet contains final specifications. Fairchild Semiconductor reserves the right to make changes at any time without notice in order to improve design.
This datasheet contains specifications on a product that has been discontinued by Fairchild semiconductor. The datasheet is printed for reference information only.
Loading...