Datasheet FDP14N30, FDPF14N30 Datasheet (Fairchild)

Page 1

FDP14N30 / FDPF14N30

TO-220
FDP Series
G
S
D
TO-220F
FDPF Series
G
S
D
D
G
S

300V N-Channel MOSFET

FDP14N30 / FDPF14N30 300V N-Channel MOSFET
February 2007
TM
UniFET
• 14A, 300V, R
• Low gate charge ( typical 18 nC)
•Low C
•Fast switching
• 100% avalanche tested
• Improved dv/dt capability
( typical 17 pF)
rss
= 0.29Ω @VGS = 10 V
DS(on)
Description
These N-Channel enhancement mode power field effect transistors are produced using Fairchild’s proprietary, planar stripe, DMOS technology.
This advanced technology has been especially tailored to minimize on-state resistance, provide superior switching performance, and withstand high energy pulse in the avalanche and commutation mode. These devices are well suited for high efficient switched mode power supplies and active power factor correction.
Absolute Maximum Ratings
Symbol Parameter FDP14N30 FDPF14N30 Unit
V
DSS
I
D
I
DM
V
GSS
E
AS
I
AR
E
AR
dv/dt Peak Diode Recovery dv/dt (Note 3) 4.5 V/ns
P
D
T
J, TSTG
T
L
* Drain current limited by maximum junction temperature
Drain-Source Voltage 300 V
Drain Current - Continuous (TC = 25°C)
Drain Current - Pulsed
Gate-Source voltage ±30 V
Single Pulsed Avalanche Energy
Avalanche Current (Note 1) 14 A
Repetitive Avalanche Energy (Note 1) 14 mJ
Power Dissipation (TC = 25°C)
Operating and Storage Temperature Range -55 to +150 °C
Maximum Lead Temperature for Soldering Purpose, 1/8” from Case for 5 Seconds
- Continuous (TC = 100°C)
(Note 1)
(Note 2)
- Derate above 25°C
14
8.4
56 56 ∗ A
330 mJ
140
1.12
300 °C
14 *
8.4 ∗
35
0.28
W/°C
Thermal Characteristics
A A
W
Symbol Parameter FDP14N30 FDPF14N30 Unit
R
θJC
R
θCS
R
θJA
©2007 Fairchild Semiconductor Corporation 1 www.fairchildsemi.com
FDP14N30 / FDPF14N30 Rev. A
Thermal Resistance, Junction-to-Case 0.89 3.56 °C/W
Thermal Resistance, Case-to-Sink Typ. 0.5 -- °C/W
Thermal Resistance, Junction-to-Ambient 62.5 62.5 °C/W
Page 2
Package Marking and Ordering Information
Device Marking Device Package Reel Size Tap e Width Quantity
FDP14N30 FDP14N30 TO-220 - - 50
FDPF14N30 FDPF14N30 TO-220F - - 50
FDP14N30 / FDPF14N30 300V N-Channel MOSFET
Electrical Characteristics T
= 25°C unless otherwise noted
C
Symbol Parameter Conditions Min. Ty p. Max Units
Off Characteristics
BV
DSS
ΔBV / ΔT
I
DSS
I
GSSF
I
GSSR
On Characteristics
V
GS(th)
R
DS(on)
g
FS
Dynamic Characteristics
C
iss
C
oss
C
rss
Switching Characteristics
t
d(on)
t
r
t
d(off)
t
f
Q
g
Q
gs
Q
gd
Drain-Source Diode Characteristics and Maximum Ratings
I
S
I
SM
V
SD
t
rr
Q
rr
Drain-Source Breakdown Voltage VGS = 0V, ID = 250μA 300 -- -- V
Breakdown Voltage Temperature
DSS
Coefficient
J
Zero Gate Voltage Drain Current VDS = 300V, VGS = 0V
ID = 250μA, Referenced to 25°C -- 0.3 -- V/°C
VDS = 240V, TC = 125°C
--
--
--
--
Gate-Body Leakage Current, Forward VGS = 30V, VDS = 0V -- -- 100 nA
Gate-Body Leakage Current, Reverse VGS = -30V, VDS = 0V -- -- -100 nA
Gate Threshold Voltage VDS = VGS, ID = 250μA 3.0 -- 5.0 V
Static Drain-Source On-Resistance
Forward Transconductance VDS = 40V, ID = 7A
Input Capacitance VDS = 25V, VGS = 0V,
Output Capacitance -- 150 195 pF
VGS = 10V, ID = 7A -- 0.24 0.29 Ω
(Note 4)
-- 10.5 -- S
-- 815 1060 pF
f = 1.0MHz
Reverse Transfer Capacitance -- 17 25 pF
Turn-O n Delay Time VDD = 150V, ID = 14A
Turn-O n Rise Time -- 105 120 ns
RG = 25Ω
-- 20 50 ns
Turn-O ff Delay Time -- 30 70 ns
Turn-O ff Fall Time -- 75 160 ns
Total Gate Charge VDS = 240V, ID = 14A
Gate-Source Charge -- 4.5 -- nC
VGS = 10V
Gate-Drain Charge -- 8 -- nC
(Note 4, 5)
-- 18 25 nC
(Note 4, 5)
Maximum Continuous Drain-Source Diode Forward Current -- -- 14 A
Maximum Pulsed Drain-Source Diode Forward Current -- -- 56 A
Drain-Source Diode Forward Voltage VGS = 0V, IS = 14A -- -- 1.4 V
Reverse Recovery Time VGS = 0V, IS = 14A
Reverse Recovery Charge -- 1.6 -- μC
dIF/dt =100A/μs (Note 4)
-- 235 -- ns
10
1
μA μA
NOTES:
1. Repetitive Rating: Pulse width limited by maximum junction temperature
2. L = 2.8mH, IAS = 14A, VDD = 50V, RG = 25Ω, Starting TJ = 25°C
3. ISD ≤ 14A, di/dt ≤ 200A/μs, VDD ≤ BV
4. Pulse Test: Pulse width ≤ 300μs, Duty Cycle ≤ 2%
5. Essentially Independent of Operating Temperature Typical Characteristics
, Starting TJ = 25°C
DSS
FDP14N30 / FDPF14N30 Rev. A
2 www.fairchildsemi.com
Page 3
Typical Performance Characteristics
10
-1
10
0
10
1
10
-1
10
0
10
1
10
2
V
GS
Top : 15.0 V
10.0 V
8.0 V
7.0 V
6.5 V
6.0 V Bottom : 5.5 V
* Notes :
1. 250
μs Pulse Test
2. T
C
= 25oC
I
D
, Drain Current [A]
VDS, Drain-Source Voltage [V]
24681012
10
0
10
1
10
2
150oC
25oC
-55oC
* Notes :
1. V
DS
= 40V
2. 250
μs Pulse Test
I
D
, Drain Current [A]
VGS, Gate-Source Voltage [V]
0 5 10 15 20 25 30 35 40 45
0.1
0.2
0.3
0.4
0.5
0.6
0.7
0.8
0.9
1.0
1.1
1.2
1.3
VGS = 20V
VGS = 10V
* Note : TJ = 25oC
R
DS(ON)
[Ω], Drain-Source On-Resistance
ID, Drain Current [A]
0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8 2.0 2.2 2.4
10
0
10
1
10
2
150oC
* Notes :
1. V
GS
= 0V
2. 250
μs Pulse Test
25oC
I
DR
, Reverse Drain Current [A]
VSD, Source-Drain voltage [V]
10
-1
10
0
10
1
0
1000
2000
C
iss
= Cgs + Cgd (Cds = shorted)
C
oss
= Cds + C
gd
C
rss
= C
gd
* Note :
1. V
GS
= 0 V
2. f = 1 MHz
C
rss
C
oss
C
iss
Capacitances [pF]
VDS, Drain-Source Volt age [V]
0 2 4 6 8 10 12 14 16 18 20
0
2
4
6
8
10
12
VDS = 150V
VDS = 60V
VDS = 240V
* Note : ID = 14A
V
GS
, Gate-Source Voltage [V]
QG, Total Gate Charge [nC]
Figure 1. On-Region Characteristics Figure 2. Transfer Characteristics
Figure 3. On-Resistance Variation vs. Figure 4. Body Diode Forward Voltage
Drain Current and Gate Voltage Variation vs. Source Current
and Temperatue
FDP14N30 / FDPF14N30 300V N-Channel MOSFET
Figure 5. Capacitance Characteristics Figure 6. Gate Charge Characteristics
FDP14N30 / FDPF14N30 Rev. A
3 www.fairchildsemi.com
Page 4
Typical Performance Characteristics (Continued)
-100 -50 0 50 100 150 200
0.0
0.5
1.0
1.5
2.0
2.5
3.0
* Notes :
1. V
GS
= 10 V
2. I
D
= 7 A
R
DS(ON)
, (Normalized)
Drain-Source On-Resistance
TJ, Junction Temperature [oC]
-100 - 50 0 50 100 150 200
0.8
0.9
1.0
1.1
1.2
* Notes :
1. V
GS
= 0 V
2. I
D
= 250μA
BV
DSS
, (Normalized)
Drain-Source Breakdown Voltage
TJ, Junction Temperature [oC]
10
0
10
1
10
2
10
-2
10
-1
10
0
10
1
10
2
100 ms
1 ms
10 μs
DC
10 ms
100 μs
Operation in This Area is Limited by R
DS(on)
* Notes :
1. T
C
= 25 oC
2. T
J
= 150 oC
3. Single Pulse
I
D
, Drain Current [A]
VDS, Drain- Source Voltage [V]
10
0
10
1
10
2
10
-2
10
-1
10
0
10
1
10
2
100 ms
1 ms
10 μs
DC
10 ms
100 μs
Operation in This Area is Limited by R
DS(on)
* Notes :
1. T
C
= 25 oC
2. T
J
= 150 oC
3. Single Puls e
I
D
, Drain Current [A]
VDS, Drain- Source Volt age [V]
25 50 75 100 125 150
0
5
10
15
I
D
, Drain Current [A]
TC, Case Temperature [oC]
Figure 7. Breakdown Voltage Variation Figure 8. On-Resistance Variation
vs. Temperature vs. Temperature
Figure 9-1. Maximum Safe Operating Area Figure 9-2. Maximum Safe Operating Area
- F DP 1 4 N3 0 - F D PF 1 4N 3 0
FDP14N30 / FDPF14N30 300V N-Channel MOSFET
Figure 10. Maximum Drain Currentvs. Case Temperature
FDP14N30 / FDPF14N30 Rev. A
4 www.fairchildsemi.com
Page 5
Typical Performance Characteristics (Continued)
10
-5
10
-4
10
-3
10
-2
10
-1
10
0
10
1
10
-2
10
-1
10
0
* No tes :
1. Z
θJC
(t) = 0.89 oC/W Max.
2. D uty Fa cto r, D =t
1/t2
3. TJM - TC = PDM * Z
θJC
(t)
single pulse
D=0.5
0.02
0.2
0.05
0.1
0.01
Z
θJC
(t), Thermal Response
t1, Square Wave Pulse Duration [sec]
t
1
P
DM
t
2
10
-5
10
-4
10
-3
10
-2
10
-1
10
0
10
1
10
-2
10
-1
10
0
10
1
* No tes :
1. Z
θJC
(t) = 3.56 oC/W Max.
2. D uty Fa cto r, D =t
1/t2
3. TJM - TC = PDM * Z
θJC
(t)
single pulse
D=0.5
0.02
0.2
0.05
0.1
0.01
Z
θJC
(t), Thermal Response
t1, Square Wave Pulse Duration [sec]
t
1
P
DM
t
2
Figure 11-1. Transient Thermal Response Curve - FDP14N30
FDP14N30 / FDPF14N30 300V N-Channel MOSFET
Figure 11-2. Transient Thermal Response Curve - FDPF14N30
FDP14N30 / FDPF14N30 Rev. A
5 www.fairchildsemi.com
Page 6
Gate Charge Test Circuit & Waveform
Resistive Switching Test Circuit & Waveforms
Unclamped Inductive Switching Test Circuit & Waveforms
FDP14N30 / FDPF14N30 300V N-Channel MOSFET
FDP14N30 / FDPF14N30 Rev. A
6 www.fairchildsemi.com
Page 7
Peak Diode Recovery dv/dt Test Circuit & Waveforms
FDP14N30 / FDPF14N30 300V N-Channel MOSFET
FDP14N30 / FDPF14N30 Rev. A
7 www.fairchildsemi.com
Page 8
Mechanical Dimensions
TO-220
FDP14N30 / FDPF14N30 300V N-Channel MOSFET
FDP14N30 / FDPF14N30 Rev. A
8 www.fairchildsemi.com
Page 9
Mechanical Dimensions
(7.00)
(0.70)
MAX1.47
(30°)
#1
3.30 ±0.10
15.80 ±0.20
15.87 ±0.20
6.68 ±0.20
9.75 ±0.30
4.70 ±0.20
10.16 ±0.20
(1.00x45°)
2.54
±0.20
0.80 ±0.10
9.40 ±0.20
2.76 ±0.20
0.35 ±0.10
ø3.18 ±0.10
2.54TYP
[2.54
±0.20]
2.54TYP
[2.54
±0.20]
0.50
+0.10 –0.05
TO-220F
FDP14N30 / FDPF14N30 300V N-Channel MOSFET
FDP14N30 / FDPF14N30 Rev. A
9 www.fairchildsemi.com
Page 10
TRADEMARKS
The following are registered and unregistered trademarks Fairchild Semiconductor owns or is authorized to use and is not intended to be an exhaustive list of all such trademarks.
®
ACEx Across the board. Around the world.™ ActiveArray™ Bottomless™ Build it Now™ CoolFET™ CROSSVOLT™ CTL™ Current Transfer Logic™ DOME™
2
E
CMOS™
EcoSPARK
®
EnSigna™ FACT Quiet Series™
®
FACT
®
FAST FASTr™ FPS™
®
FRFET GlobalOptoisolator™ GTO™
HiSeC™ i-Lo™ ImpliedDisconnect™ IntelliMAX™ ISOPLANAR™ MICROCOUPLER™ MicroPak™ MICROWIRE™ MSX™ MSXPro™ OCX™ OCXPro™ OPTOLOGIC OPTOPLANAR
®
®
PACMAN™ POP™ Power220 Power247
® ®
PowerEdge™ PowerSaver™
PowerTrench Programmable Active Droop™ QFET QS™ QT Optoelectronics™ Quiet Series™ RapidConfigure™ RapidConnect™ ScalarPump™ SMART START™
®
SPM SuperFET™ SuperSOT™-3 SuperSOT™-6 SuperSOT™-8 TCM™ The Power Franchise
™
TinyBoost™ TinyBuck™
DISCLAIMER
FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION OR DESIGN. FAIRCHILD DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS. THESE SPECIFICATIONS DO NOT EXPAND THE TERMS OF FAIRCHILD’S WORLDWIDE TERMS AND CONDITIONS, SPECIFICALLY THE WARRANTY THEREIN, WHICH COVERS THESE PRODUCTS.
LIFE SUPPORT POLICY
FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF FAIRCHILD SEMICONDUCTOR CORPORATION.
As used herein:
1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body or (b) support or sustain life, and (c) whose failure to perform when properly used in accordance with instructions for use
2. A critical component in any component of a life support, device, or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness.
provided in the labeling, can be reasonably expected to result in a significant injury of the user.
PRODUCT STATUS DEFINITIONS Definition of Terms
Datasheet Identification Product Status Definition
Advance Information Formative or In Design This datasheet contains the design specifications for product
development. Specifications may change in any manner without notice.
Preliminary First Production This datasheet contains preliminary data; supplementary data will be
published at a later date. Fairchild Semiconductor reserves the right to make changes at any time without notice to improve design.
No Identification Needed Full Production This datasheet contains final specifications. Fairchild Semiconductor
reserves the right to make changes at any time without notice to improve design.
Obsolete Not In Production This datasheet contains specifications on a product that has been
discontinued by Fairchild Semiconductor. The datasheet is printed for reference information only.
®
®
TinyLogic TINYOPTO™ TinyPower™
®
TinyWire™ TruTranslation™ μSerDes™
®
UHC UniFET™ VCX™ Wire™
®
Rev. I23
© 2007 Fairchild Semiconductor Corporation www.fairchildsemi.com
Loading...