Datasheet FDLL300A, FDLL300, FDLL333, FDH333, FDH300A Datasheet (Fairchild Semiconductor)
...Page 1
FDH/FDLL 300/A / 333
DO-35
THE PLACEMENT OF THE EXPANSION GAP
HAS NO RELATIONSHIP TO THE LOCATION
OF THE CATHODE TERMINAL
High Conductance Low Leakage Diode
Sourced from Process 1M. See MMBD1501/A-1505/A for characteristics.
LL-34
Discrete POWER & Signal
Technologies
COLOR BAND MARKING
DEVICE
FDLL300 BROWN GREEN
FDLL300A BROWN YELLOW
FDLL333 BROWN BLUE
1ST BAND 2ND BAND
FDH300/A / FDLL300/A / FDH333 / FDLL333
Absolute Maximum Ratings* TA = 25°C unless otherwise noted
Symbol Parameter Value Units
W
IV
I
O
I
F
i
f
i
f(surge)
T
stg
T
J
Working Inverse Voltage 125 V
Average Rectified Current 200 mA
DC Forward Current 500 mA
Recurren t Peak Forward Current 600 mA
Peak Forward Surge Current
Pulse width = 1.0 second
Pulse width = 1.0 microsecond
Storage Temperature Range -65 to +200
Operating Junction Temperature 175
1.0
4.0
A
A
°
°
C
C
*These ratings are limiting values above which the serviceability of any semiconductor device may be impaired.
NOTES:
1) These ratings are based on a maximum junction temperature of 200 degrees C.
2) These are steady state limits. The factory should be consulted on applications involving pulsed or low duty cycle operations.
Thermal Characteristics TA = 25°C unless otherwise noted
Symbol Characteristic Max Units
FDH/FDLL 300/A / 333
P
D
R
θ
JA
Total Dev ice Dissipation
Derate above 25°C
500
3.33
Thermal Resistan ce, Junction to Ambient 300
mW
mW/°C
C/W
°
ã 1997 Fairchild Semiconductor Corporation
Page 2
µ
High Conductance Low Leakage Diode
(continued)
Electrical Characteristics TA = 25°C unless otherwise noted
Symbol Parameter Test Conditions Min Max Units
B
V
I
R
V
F
Breakdown Voltage
Reverse Current
Forward Voltage
FDH/FDLL 300/A
FDH/FDLL 333
FDH/FDLL 300/A
FDH/FDLL 300
FDH/FDLL 300A
FDH/FDLL 300/A
FDH/FDLL 300
FDH/FDLL 300A
FDH/FDLL 300/A
FDH/FDLL 300/A
I
= 100 µA
R
VR = 125 V
V
= 125 V, TA = 150°C
R
V
= 125 V
R
V
= 125 V, TA = 100°C
R
I
= 1.0 mA
F
I
= 5.0 mA
F
I
= 5.0 mA
F
I
= 10 mA
F
I
= 50 mA
F
I
= 50 mA
F
I
= 100 mA
F
I
= 200 mA
F
150 V
1.0
3.0
3.0
500
680
750
760
800
880
890
920
mV
mV
mV
mV
mV
mV
mV
1.0
nA
A
nA
nA
V
FDH300/A / FDLL300/A / FDH333 / FDLL333
I
FDH/FDLL 333
C
O
Diode Capacitance VR = 0, f = 1.0 MHz 6.0 pF
= 50 mA
F
I
= 100 mA
F
I
= 150 mA
F
I
= 200 mA
F
I
= 250 mA
F
I
= 300 mA
F
800
830
860
0.87
0.88
0.9
890
940
970
1.05
1.08
1.15
mV
mV
mV
V
V
V
Page 3
TRADEMARKS
The following are registered and unregistered trademarks Fairchild Semiconductor owns or is authorized to use and is
not intended to be an exhaustive list of all such trademarks.
ACEx™
CoolFET™
CROSSVOLT™
E2CMOS
TM
FACT™
FACT Quiet Series™
®
FAST
FASTr™
GTO™
HiSeC™
ISOPLANAR™
MICROWIRE™
POP™
PowerTrench™
QS™
Quiet Series™
SuperSOT™-3
SuperSOT™-6
SuperSOT™-8
TinyLogic™
DISCLAIMER
FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER
NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION OR DESIGN. FAIRCHILD
DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT
OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT
RIGHTS, NOR THE RIGHTS OF OTHERS.
LIFE SUPPORT POLICY
FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT
DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF FAIRCHILD SEMICONDUCTOR CORPORATION.
As used herein:
1. Life support devices or systems are devices or
systems which, (a) are intended for surgical implant into
the body, or (b) support or sustain life, or (c) whose
failure to perform when properly used in accordance
with instructions for use provided in the labeling, can be
reasonably expected to result in significant injury to the
user.
2. A critical component is any component of a life
support device or system whose failure to perform can
be reasonably expected to cause the failure of the life
support device or system, or to affect its safety or
effectiveness.
PRODUCT STATUS DEFINITIONS
Definition of Terms
Datasheet Identification Product Status Definition
Advance Information
Preliminary
No Identification Needed
Obsolete
Formative or
In Design
First Production
Full Production
Not In Production
This datasheet contains the design specifications for
product development. Specifications may change in
any manner without notice.
This datasheet contains preliminary data, and
supplementary data will be published at a later date.
Fairchild Semiconductor reserves the right to make
changes at any time without notice in order to improve
design.
This datasheet contains final specifications. Fairchild
Semiconductor reserves the right to make changes at
any time without notice in order to improve design.
This datasheet contains specifications on a product
that has been discontinued by Fairchild semiconductor.
The datasheet is printed for reference information only.
Loading...