Page 1
F-DG105P
Designed by
KH 06.09.2011
Dimensions without tolerance ±0.
5mm
Index: 0
1 Current date
Released by
BH 06.09.2011
110
906
.1BDB
16.03.2012
Changed by
KH
16.03.2012
Page
1 of 5
Electrical and
Electrical and AAAAcoustical
Electrical and Electrical and
Rated voltage (Vp-p) * 1.5
Operating voltage (Vp-p) 1.0 – 2.0
Coil restistance (Ω) 50±5
Rated current (mA) * max. 10
Sound pressure level (dBA/10cm) * min. 70
Resonanz Frequency (Hz) 2048
Remark: *Applying rated voltage (Resonant frequency, Square wave ½ duty)
Mechanical,
Mechanical, EEEEnviromental
Mechanical, Mechanical,
Contact / Wire Pin
coustical PPPParameter
coustical coustical
nviromental PPPParameter
nviromental nviromental
arameter
arameterarameter
arameter
arameterarameter
Operating temperature (°C) -20 to +70
Storage temperature (°C) -30 to +85
Material housing PPO
Color Housing Black
Component weight (g) 1.3
Remark:
Approval
Approval
ApprovalApproval
RoHs
UL
Drawing number
Page 2
Designed by
KH 06.09.2011
Dimensions without tolerance ±0.
5mm
Index: 0
1 Current date
Released by
BH 06.09.2011
110
906
.1BDB
16.03.2012
Changed by
KH
16.03.2012
Page
2 of 5
Drawing
Drawing of Component
DrawingDrawing
of Component
of Componentof Component
Unit:mm
F-DG105P
Test method
Test method
Test method Test method
Drawing number
Page 3
Designed by
KH 06.09.2011
Dimensions without tolerance ±0.
5mm
Index: 0
1 Current date
Released by
BH 06.09.2011
110
906
.1BDB
16.03.2012
Changed by
KH
16.03.2012
Page
3 of 5
Make the test for the directions of X Y and Z
After the test part shall
Frequency Response
Frequency Response
Frequency ResponseFrequency Response
F-DG105P
Reliability test
Reliability test
Reliability testReliability test
NO. ITEM TESTING CONDITION VARIANCE AFTER TEST
1 Humidity 50±5℃, 93(+2/-3)%RH, 96HRS
2 High temp. +80±2℃, 96HRS
3 Low temp. -30±2℃, 96HRS
Sound pressure level
Temperature
4
5 Drop test
6 Vibration test
cycling
-30±2℃, 30minutes
room temp. 15 minutes
+85±2℃, 30 minutes
room temp. 15 minutes 5 cycles
3 times from height of 70cm onto the surface
of 10mm thick wooden board.
(total 0.5 hours).
To-and-fro. sweep time (from 10 to 55 Hz and
then 55 to 10 ) under single amplitude of
1.0mm is 1 minute.
initial value±10dB
Max. current
value±1mA
Oscillating frequency
value±300Hz.
7
Solder heat
resistance
The part leads (pins) shall be immersed in
molten solder maintained at 250±10℃ for a
period of 30 seconds.
Drawing number
meet specifications
without any
degradation in
appearance and
performance.
Page 4
F-DG105P
Designed by
KH 06.09.2011
Dimensions without tolerance ±0.
5mm
Index: 0
1 Current date
Released by
BH 06.09.2011
110
906
.1BDB
16.03.2012
Changed by
KH
16.03.2012
Page
4 of 5
Temp. Profile for Reflow Oven
Temp. Profile for Reflow Oven
Temp. Profile for Reflow OvenTemp. Profile for Reflow Oven
Hand soldering is required!
Hand soldering is required!
Hand soldering is required!Hand soldering is required!
Packaging
Packaging IIIInformation
Packaging Packaging
nformation
nformationnformation
n.a.
n.a.
n.a.n.a.
NOTES:
1. 100 PCS per box
2. Total 50 boxes per carton
3. Total 5000 PCS carton
4. Volume:51.5×42×26cm
Drawing number
Page 5
Designed by
KH 06.09.2011
Dimensions without tolerance ±0.
5mm
Index: 0
1 Current date
Released by
BH 06.09.2011
110
906
.1BDB
16.03.2012
Changed by
KH
16.03.2012
Page
5 of 5
implementation
implementation implementation
implementation
Nr.
Nr.Nr.
Nr.
Reason
Reason Reason
Reason
----
Procedure
ProcedureProcedure
Procedure
Date
DateDate
Date
Change description
Change descriptionChange description
Change description
Revision Table
Revision Table
Revision TableRevision Table
Index
Index Date
IndexIndex
Date
DateDate
01 Drawing change (+ sign) 16.03.2012 16.03.2012
F-DG105P
LS
LS----Nr.:
Drawing
Drawing
DrawingDrawing
Nr.: Comments
LSLS
Nr.:Nr.:
Date
Date
DateDate
Comments
CommentsComments
Drawing number
Loading...