Datasheet Evercon [smd] ZH Series Datasheet

Page 1

SMD ALUMINUM ELECTROLYTIC CAPACITORS

Series

FEATURES

. 4~ 16Ø, 105°C,2,000~5,000 hours assured .Large capacitance with ultra low impedance capacitors . Designed for surface mounting on high density PC board. . RoHS Compliance

SPECIFICATIONS

Items Performance

Operating Temperature

Range

Capacitance Tolerance ±20% (at 120Hz,20

6.3~63V 80~100V

C ~ +105°C -40° ~ +105°C

-55

Leakage Current (at 20°C)

Dissipation Factor

(Tanδ at 120Hz, 20°C)

Low Temperature

Characteristics (ar 120Hz)

Load Life Test

Shelf Life Test Test time: 1,000 hrs; other items are the same as those for the load life test

Rated Voltage 6.3 10 16 25 35 50 63 80 100

Tanδ (max) 0.30 0.26 0.22 0.16 0.13 0.10 0.08 0.08 0.07

When the capacitance exceeds1,000μF ,0.02shall be added every 1,000μF increase

Impedance ratio shall not exceed the values given in the table below.

Rated Voltage

Impedance

Ratio

Capacitance Change Within ± 30% of initial value

Dissipation Factor Less than 300% 0f specied value

Leakage Current Within specied value

* The above specications shall be satised when the capacitors are restored to 20°C after the rated voltage applied for 2,000 ~ 5,000 hrs at 105°C.

Z(-25°C)Z(+20°C) 4 3 2 2 2 2 2 2 2

Z(-40°C)Z(+20°C) 8 5 4 3 3 3 3 3 3

Test Time 2,000 Hrs for 4 ~ 6.3Ø 5,000 Hrs for 8 ~ -16Ø

I=0.01CV or 3μA, whichever is greater (after 2minutes)

Wher, C=rated capacitance in μF. V=rated DC working voltage in V.

6.3 10 16 25 35 50 63 80 100

Ripple Current &

Frequency Multipliers

Other Standards JIS C 5101-1,-18

Freg. (Hz)

V.dc (V)

6.3~100 0.64 0.8 0.93 1.0

LEAD SPACING AND DIAMETER Unit:mm

Ø D

4 5.7±0.3 4.3 4.3 2.0 0.5 to 0.8 1.0 1

5 5.7±0.3 5.3 5.3 2.3 0.5 to 0.8 1.5 1

6.3 5.7±0.3 6.3 6.3 2.7 0.5 to 0.8 2.0 1

6.3 7.7±0.3 6.6 6.6 2.7 0.5 to 0.8 2.0 1

8 10±0.5 8.4 8.4 3.0 0.7 to 1.1 3.1 1

8 10.3±0.5 8.4 8.4 3.0 0.7 to 1.1 3.1 1

10 10±0.5 10.4 10.4 3.3 0.7 to 1.1 4.7 1

10 10.3±0.5 10.4 10.4 3.3 0.7 to 1.1 4.7 1

12.5 13.5±0.5 12.8 12.8 4.9 1.1 to 1.4 4.2 2

12.5 16±0.5 12.8 12.8 4.9 1.1 to 1.4 4.2 2

16 16.5±0.5 16.3 16.3 5.8 1.1 to 1.4 6.0 2

L A B C W P±0.2 Fig. No.

50, 60 120 1K 10K up

DIAGRAM OF DIMENSIONS

Page 2

DIMENSION & PERMISSIBLE RIPPLE CURRENT

V.DC

µF Ø DxL lmp mA Ø DxL lmp mA Ø DxL lmp mA Ø DxL lmp mA Ø DxL lmp mA

Content

6.3V(0J) 10V(1A) 16V(1C) 25V(1E) 35V(1V)

SMD ALUMINUM ELECTROLYTIC CAPACITORS

Dimension: Ø D x L(mm)

Ripple Current: mA/rms at 100 Hz,105°C Impedance: Ω / at 100k Hz, 20°C

4.7 4R7

10 100

22 220

33 330

47 470

100 101

150 151

220 221

330 331

470 471

680 681

1000 102

1500 152

2200 222

4x5.7 1.35 80

4x5.7 1.35 80 4x5.7 1.35 80 5x5.7 0.80 150

4x5.7 1.35 80 4x5.7 1.35 80 5x5.7 0.80 150 5x5.7 0.80 150 6.3x5.7 0.44 230

4x5.7 1.35 80 5x5.7 0.80 150 6.3x5.7 0.44 230 6.3x5.7 0.44 230 6.3x5.7 0.44 230

5x5.7 0.80 150 6.3x5.7 0.44 230 6.3x5.7 0.44 230 6.3x5.7 0.44 230 6.3x5.7 0.44 230

6.3x5.7 0.44 230 6.3x5.7 0.44 230 6.3x5.7 0.44 230 6.3x7.7 0.36 280 8x10 0.17 450

6.3x5.7 0.44 230 6.3x5.7 0.44 230 6.3x7.7 0.36 280 8x10 0.17 450 8x10 0.17 450

6.3x7.7 0.36 280 6.3x7.7 0.36 280 6.3x7.7 0.36 280 8x10 0.17 450 10x10 0.09 670

8x10 0.17 450 8x10 0.17 450 8x10 0.17 450 8x10.3 0.17 450 12.5x13.5 0.070 820

8x10 0.17 450 8x10 0.17 450

8x10.3 0.17 450 10x10 0.09 670 10x10.3 0.09 670 12.5x13.5 0.070 820 12.5x16 0.060 950

8x10.3 0.17 450 10x10 0.09 670 12.5x13.5 0.070 820 12.5x16 0.060 950 16x16.5 0.054 1,260

10x10.3 0.09 670 12.5x13.5 0.070 820 12.5x16 0.060 950 16x16.5 0.054 1,260

12.5x13.5 0.070 820 12.5x16 0.060 950 16x16.5 0.054 1,260 16x16.5 0.054 1,260

8x10 0.17 450

10x10 0.09 670 12.5x16 0.060 950

10x10 0.09 670

3300 332

4700 472

6.3V(0J) 10V(1A) 16V(1C) 25V(1E)

Content

µF Ø DxL lmp mA Ø DxL lmp mA Ø DxL lmp mA Ø DxL lmp mA

1 010

2.2 2R2

3.3 3R3

4.7 4R7

10 100

22 220

33 330

47 470

68 68

100 101

150 151

12.5x16 0.060 950 16x16.5 0.054 1,260 16x16.5 0.054 1,260

16x16.5 0.054 1,260 16x16.5 0.054 1,260

V.DC

4x5.7 2.9 60

5x5.7 1.52 85 5x5.7 1.52 85

6.3x5.7 0.88 165 6.3x5.7 0.88 165

6.3x5.7 0.88 165 6.3x7.7 0.68 185

6.3x7.7 0.68 185 8x10 0.34 369

6.3x7.7 0.68 185 8x10 0.34 369 10x10 0.7 200 10x10 0.7 200

8x10 0.34 369 10x10 0.18 553 10x10.3 0.7 200 12.5x13.5 0.32 450

8x10 0.34

369 10x10 0.18 553 12.5x13.5 0.32 450 12.5x16 0.26 550

10x10 0.18

10x10.3 0.18 553 12.5x13.5 0.12 650 12.5x13.5 0.32 450 16x16.5 0.17 650

220 221

330 331

470 471

680 681

10x10.3 0.18 553 12.5x13.5 0.12 650 12.5x16 0.26 550

12.5x13.5 0.12 650 16x16.5 0.082 900 16x16.5 0.17 650

16x16.5 0.082 900 16x16.5 0.082 900

16x16.5 0.082 900