Datasheet EHP (EHP_090318) Datasheet

Page 1
EHP SERIES
z 105℃2000hoursassuredlife. z Directlymountableonprintedcircuitboardwithoutholders. z Smallerlowprofilesizesthanordinarycapacitors. z Aluminumcasedesignedexplosion‐proofvent.
Characteristics
Voltage Range Capacitance Range Temperature Range
Capacitance Tolerance Leakage Current
Dissipation Factor (tanδ) ( at 20℃, 120Hz )
Stability at Low Temperature
Load Life
Shelf Life
Less than the value under table (%)
uF \\ W.V.
47 ~ 390 470 ~3900 4700~8200 10000~22000 27000~47000
Impedance ration at 120Hz between the -25℃ or -40℃ value and 20℃ value shall not exceed :
Rated Voltage (V)
Z-25℃/Z 20℃
℃/Z 20℃
Z-40 The following specifications shall satisfied when the capacitors are restored to 20℃ after rated working voltage applied for 2,000 hours at max. operating temperature with the rated ripple current.
After storage for 1000 hours at 105 limit in load life.
470 ~ 47000uF 330 ~ 2200uF
-40 ~ +105
℃ -25 ~ +105℃
±20% at 120Hz , 20
I =3
10 ~ 16 25 ~ 35 50 ~ 63 80 ~ 100 160 ~ 250 350 ~ 450
- - - 15 15 20 25 20 20 20 15 20 35 30 30 25 40 35 30 45 40 35
Capacitance change Dissipation factor Leakage current
uA max C: Capacitance, V:W.V. (After 5 minutes)
CV
16 25
5 4 4 4 4 8 8
15 15 12 - - - -
≦±20% of the initial value. ≦±200% of the initial specified value ≦The initial specified value.
℃ with no voltage applied, the capacitor shall meet the specified
℃( 10% Tol. is available upon request)
35~100 160~200 250~350
400 450
Diagram of dimensions
Multiplier for R.C. vs Temparature
Temp.(℃) Multiplier
45 60 85 95 105
2.10 1.90 1.40 1.25 1.00
Multiplier for Ripple Current VS Frequency
Cap.(uF)\\ (Hz) 60 120 1K 10K 50K - 100K 10<Cap.≦100
100<Cap.≦1000 1000<Cap.
0.8 1 1.36 1.48 1.53
0.8 1 1.25 1.35 1.38
0.8 1 1.17 1.25 1.28
40
Page 2
EHP SERIES
Standard Products Table
W.V(DC) CAP. (µF)
6800 2.02 22 30 - -
10000 2.79 22 30 25 25 -
16
25
35
50
63
80
100
15000 3.24 22 50 25 40 30 35 22000 4.08 25 45 30 40 ­33000 4.83 30 45 35 35 ­47000 6.32 35 45 - -
4700 1.92 22 25 - -
6800 2.60 22 30 25 25 ­10000 3.50 22 40 25 35 30 30 15000 4.58 25 45 30 35 ­22000 5.12 30 45 35 35 ­33000 6.09 35 50 - -
3300 1.84 22 25 - -
4700 2.42 22 30 25 25 -
6800 3.24 22 40 25 35 30 30 10000 3.96 25 45 30 35 ­15000 4.69 30 45 35 35 ­22000 5.50 35 50 - -
2200 1.65 22 30 25 25 -
3300 2.24 22 35 25 30 -
4700 2.95 22 45 25 40 30 30
6800 3.26 25 50 30 40 ­10000 4.11 30 50 35 40 ­15000 5.05 35 50 - -
2200 1.65 22 35 25 30 -
3300 2.48 22 50 25 40 30 30
4700 3.43 25 50 30 40 -
6800 4.64 30 50 35 40 ­10000 5.75 35 50 - -
1000 1.16 22 35 25 30 -
1500 1.74 22 40 25 35 30 30
2200 2.25 22 50 25 45 30 35
3300 3.30 30 50 35 40 -
4700 4.29 30 50 35 40 -
6800 5.66 35 50 - -
470 0.79 22 25 - -
680 1.02 22 30 - ­1000 1.38 22 35 25 25 ­1500 1.83 22 45 25 40 30 30 2200 3.03 25 50 30 40 ­3300 4.59 30 50 35 40 ­4700 5.43 35 50 - -
Current A
max. 105℃,
Ripple
120Hz
Dimensions A Dimensions B Dimensions C
Dψ
L
Dψ
L
Dψ
L
41
Page 3
EHP SERIES
Standard Products Table
Ripple
W.V(DC) CAP. (µF)
330 0.98 22 25 - -
470 1.21 22 35 25 25 -
160
200
250
350
400
450
680 1.64 22 45 25 40 ­1000 2.15 25 45 30 40 ­1500 2.80 30 50 35 40 ­2200 3.39 35 50 - -
220 0.92 22 25 - -
330 1.21 22 35 25 30 -
470 1.62 22 40 25 30 -
680 2.04 25 40 30 30 30 35 1000 2.70 30 45 35 35 ­1500 3.43 35 50 - -
220 1.00 22 30 25 25 -
330 1.28 22 40 25 30 -
470 1.76 22 50 25 40 30 30
680 2.22 25 50 30 40 35 35 1000 2.80 35 45 - -
100 0.69 22 30 25 30 -
150 0.82 22 40 25 35 -
220 1.00 22 50 30 30 30 35
330 1.35 30 40 35 35 -
470 1.70 35 40 - -
47 0.56 22 25 - -
68 0.72 22 25 - ­100 0.82 22 35 25 25 25 30 150 0.98 22 45 25 30 25 40 220 1.21 25 40 25 50 30 35 330 1.57 30 50 35 40 ­470 1.98 30 50 35 45
47 0.60 22 25 - -
68 0.80 22 35 25 30 ­100 0.90 22 40 25 25 25 30 150 1.05 22 50 25 40 30 30 220 1.24 25 50 30 35 30 40 330 1.64 30 50 35 45 ­470 1.70 35 50 - -
Current A
max. 105℃,
120Hz
Dimensions A Dimensions B Dimensions C
Dψ
L
Dψ
L
Dψ
L
42
Loading...