Page 1
Plastic Film Capacitors
Su
Metallized Polypropylene Film Capacitor
Type： ECQUA ［Class Ｘ2］
In accordance with UL/CSA and European safety
regulation class X2
■Features
●Compact
●Flame-retardant plastic case and non-combustible resin
●RoHS directive compliant
■Recommended Applications
●Interference suppressors
■Explanation of Part Numbers
E C Q U A A F
Product code
Dielectric &
construction
Rated voltage Capacitance
KM±
±
10%
20%
12
ffix Cap. Tol.
Blank
A
Straight
Cut lead
■Applicable Standard
UL UL 60384-14
CSA CAN/CSA E60384-14
Europe EN 60384-14 Class X2 (0.10 μＦ to 2.2 μＦ)
International IEC 60384-14 Class X2 (0.10 μＦ to 2.2 μＦ)
Across-The-Line Capacitors
Antenna-Coupling and Line-By-Pass Components
Across-the-line capacitors
Antenna-isolation and line-by-pass capacitors
(0.10 μＦ to 2.2μＦ)
(0.10 μＦ to 2.2 μＦ)
Accredited
by UL
Accredited
by VDE
＊When applying this capacitor to European and American safety standards, please use type designation and rating
such as ECQUA，0.1μF.
＊Approval number (File No.) of safety regulations are subject to revision without notice. Ask factory for a copy of the
latest file No
■Specifications
Category temp. range －40 ℃ to ＋110 ℃
Rated voltage 275 VAC (Safety standard approval)
Capacitance range 0.10 to 2.2μF
Capacitance tolerance ±10 ％ (K)，±20 ％ (M)
Dissipation factor (tanδ)
Withstand voltage
Insulation resistance (IR)
Maximum AC voltage ＊
C≦1.0μF：tanδ≦0.1 ％ (20 ℃，1 kHz)
C＞1.0μF：tanδ≦0.2 ％ (20 ℃，1 kHz)
Between terminals: 633 VAC，1183VDC 60s
Between terminals to enclosure: 2050 VAC 60 s
C≦0.33μF : IR≧15000 MΩ (20 ℃, 100 VDC, 60 s)
C＞0.33μF : IR≧5000 MΩ・μF （20 ℃, 100 VDC, 60 s）
C≦0.47μF :IR≧2000 MΩ（20 ℃, 500 VDC, 60 s）
310 VAC
＊Use of this capacitor is limited to AC voltage (50Hz or 60Hz sine wave).
＊Suitable for series to the mains usage - for more details, please contact your Panasonic contact person.
(no influence of corona discharge at rated voltage)
＊Maximum AC voltage including line voltage fluctuation is 310V AC.
310VAC is not nominal continuous applied voltage, but only indicates maximum value including fluctuation in the voltage
of the power supply. B asic nominal voltage is considered as 240V AC.
This maximum AC voltage is specified in only ECQUA type, not specified in other types.
Please refer to individual product specification, and contact us for further questions regarding design life.
Design, Specifications are subject to change without notice. Ask factory for technical specifications before purchase and/or use.
Whenever a doubt about safety arises from this product, please inform us immediately for techn ical consultation without fail.
Page 2
Plastic Film Capacitors
(Su
)
■Dimensions in mm (not to scale)
Cut lead
ffix A
Marking Example
P（ Lead location limits from center)
P (Lead location limits from center)
Solder-plated copper-clad steel wire
Solder-plated copper-clad steel wire
※≧1.2μF ±1.0
(A)
Note : only ± 10 % as cap. tol. be marked as “K”. Note Data Code.
(B) or
(C)
■Rating & Dimensions
●Capacitance tolerance : ±10 ％ (K)，±20 ％ (M)
Part No.
Capacitance
(μF)
Ｌ Ｔ Ｈ Ｆ φｄ Ｐ Q
ECQUAAF104□（ ） 0.10 17.5 5.0 12.0 15.0 0.60 0±0.8 1.3
ECQUAAF154□（ ） 0.15 17.5 6.0 13.0 15.0 0.60 0±0.8 1.3
ECQUAAF224□（ ） 0.22 17.5 7.5 14.0 15.0 0.60 0±0.8 1.3
ECQUAAF334□（ ） 0.33 17.5 9.0 16.0 15.0 0.60 0±0.8 1.3
ECQUAAF474□（ ） 0.47 26.0 8.5 15.0 22.5 0.80 0±0.8 1.8 600
ECQUAAF684□（ ） 0.68 26.0 10.0 17.0 22.5 0.80 0±0.8 1.8 500 500
ECQUAAF105□（ ） 1.0 26.0 12.0 19.0 22.5 0.80 0±0.8 1.8 300 300
ECQUAAF155□（ ） 1.5 31.0 12.0 22.0 27.5 0.80 0±0.8 1.8
ECQUAAF225□（ ） 2.2 31.0 14.5 24.5 27.5 0.80 0±0.8 1.8
Cap. tol. code
Dimension （ｍｍ）
Min. order Q’ty
Straight Cut lead
1000
1000
800
200 200
Design, Specifications are subject to change without notice. Ask factory for technical specifications before purchase and/or use.
Whenever a doubt about safety arises from this product, please inform us immediately for technical consultation without fail.
Page 3
)
ECQUA Type
AC275V series
Electrical Characteristics <Typical Data >
(Metallized Polypropylene Film
Temperature Characteristics
at 1kHz
10
5
0
-5
Capacitance change(%)
-10
-40-200 20406080100
Temperature(Degree C)
at 1kHz
0.5
0.4
0.3
0.2
0.1
0.0
-40 -20 0 20 40 60 80 100
0.10uF
0.47uF
1.0uF
2.2uF
Capacitance change(%)Impedance(ohm) Dissipation factor(%)
0.10uF
0.47uF
1.0uF
2.2uF
Frequency Characteristics
10
2.2uF
5
0
-5
-10
1 10 100 1000
Frequency(kHz)
10
8
6
4
2
0
1 10 100 1000
1.0uF
2.2uF
1.0uF
0.47uF
0.10uF
0.47uF
0.10uF
Frequency(kHz)Temperature(Degree C)
1.E+13
1.E+12
1.E+11
1.E+10
1.E+09
1.E+08
Insulation resistance(ohm) Dissipation factor(%)
1.E+07
at DC100V
0.10uF
0.47uF
1.0uF
2.2uF
-40 -20 0 20 40 60 80 100
Temperature(Degree C)
10000
1000
100
10
1
0.1
0.01
0.10uF
0.47uF
1.0uF
2.2uF
1 10 100 1000 10000
Frequency(kHz)
Loading...