6 End of treatment and care9
7Storage10
8Troubleshooting and maintenance11
8.1 Maintenance and spare parts11
8.2 Replace batteries11
9Technical data12
Introduction
The Omron E4 Tens is a massager to relieve pain and fatigue of your muscles. It can be used for
treatment of several parts of the body, e.g. shoulders, knees, elbows, soles of the feet, calves and the
lower back.
1
Page 3
1. Safety precautions
A
E
C
F
H
B
D
G
E4 English
General
• Do not let children or infirm people have
access to the massager.
• Do not apply Long Life pad during treatment on
other person.
Do not use the massager under the following
circumstances:
• Persons with medical implants, e.g. heart
pacemakers.
•Simultaneously with other medical devices, e.g.
respirators and electrocardiographs.
• Any condition where your doctor deems low
frequency electrotherapy inappropriate.
•While driving.
•While sleeping.
Consult your doctor:
• During an acute, contagious or infectious disease.
•When suffering from a malignant tumour.
• During pregnancy or during menstruation.
•When suffering from cardiac dysfunction or
abnormal blood pressure.
2. Overview
•Varicose veins.
•When having high fever.
• During medical treatment, especially those that
are leading to discomfort.
Tips for use
• Do not apply ointment to the skin.
• Do not apply the Long Life pads near the heart,
above the neck, on the head, around the mouth.
•Do not apply the Long Life pads on skin with
disorders.
•Treat one part of the body for maximum 30
minutes.
Caution
• Do not drop the massager.
• Put the Long Life pads only on skin or on the
Long Life pads holder to avoid damage of the
adhesive surfaces of the pads.
• Do not use the massager in a sauna or while
taking a bath or shower.
• Keep cellular phones 5 meters out of range
during treatment.
A Main unit
B Electrode cord with safety plug
C Red connector
D White connector
2
E Long Life pads
F Long Life pads holder
G Battery compartment
H Soft fabric storage case
Page 4
2.1 Control functions
E4 English
J
J1
J2
K
Q
W2
W1
W4
J3
J4
M
L
N
P
S
R
T
U
V
W
W3
J Display:
J1 Minutes to go during treatment,
J2 Blinking bar shows frequency,
J3 Indication Point,
J4 Indication Wide.
K Low frequency button: to select treatment for
stiff muscles.
L High frequency button: to select treatment for
acute pain.
M On/Off and Adjustment Dial Switch: to turn
on/off the power and to adjust the intensity.
N Display shows on/off, intensity 0 to 10.
P Part of the body button: to select region.
Q Indication Part of the body button (shoulder,
joint, arm, sole, leg, back).
R Massage button: to select favourite massage
method.
S Indication massage method (tap, knead, push
and rub).
T Hyper button: to select gradual increase of
intensity.
U Soft button: to select soft stimulation.
V Repeat button: to repeat favourite stimulation.
WPoint/Wide:
W1 Left (red) Long Life pad,
W2 Pulse is applied on one point,
W3 Right (white) Long Life pad,
W4 Pulse is applied on a wider surface.
3
Page 5
E4 English
3. How to obtain a correctt treatment
3.1 Program
To obtain a correct treatment you have available twelve treatment programs (see table below).
A treatment program runs during 15 minutes.
ComplaintProgramEffect
1Stiff muscles,Different combinations of vibrations on a low
numbnessfrequency to promote blood circulation. This program
is effective over a long period
2Acute painHigh frequency vibrations relieve acute pain promptly
4Acute elbow High frequency vibrations relieve pain promptly
or knee pain
5Arm fatigue Different vibrations promote blood circulation
6Swelling andDifferent vibrations promote circulation of blood
foot fatigueand body fluid in the feet
7Swelling andDifferent vibrations promote circulation of blood
calf fatigueand body fluid in the limbs
8Back pain orLow frequency vibrations promote circulation of
lower back blood and relieve pain (neuralgia)
stiffness
9
10
Various symptomsYour favourite massage method (tap, knead, push
11or rub) relieves stiffness, pain and fatigue
12
4
Page 6
E4 English
1
10
1
4. Preparation3.2 Settings
Several settings can be made to get your favourite
treatment. You can compose your favourite treatment at the beginning of the treatment program
and you can change it any time.
Hyper mode and Soft mode
You can select either Hyper mode or Soft mode.
Hyper mode increases gradual stimulation during
treatment and relieves stiffness effectively. Soft
mode stimulates without giving the feeling of
irritation and relieves stiffness comfortably.
Treatment surface
The treatment can be applied on a specific point
or to a wider surface of the Long Life pads.
Intensity
4.1 Insert batteries
OFF
"Click"
1 Turn the On/Off-switch OFF.
2 Remove the battery cover.
The intensity level of the massage is adjustable
with a dial switch.
Repeat
You can repeat your favourite stimulation. If the
repeat button is activated the device will repeat the
last part of the selected treatment program. The
device will continue with the treatment program if
the repeat button is deactivated.
3 Insert two batteries in the battery compartment.
Caution! Use two identical batteries!
5
Page 7
E4 English
4 Put the battery cover on the battery
compartment.
4.2 To use the massager for the first time
OFF
"Click"
Caution! Make sure the device is turned off and
that the batteries are inserted correctly!
2 Take the Long Life pads out of the sealed package.
3 Connect the electrode cord to the Long Life pads.
4 Remove the film from the Long Life pads and
attach the pads directly onto your skin.
Caution! Do not damage the adhesive
surfaces of the Long Life pads!
1 Pinch the safety plug and connect it to the main
unit.
6
Page 8
4.3 Attach Long Life pads
Caution! Always use clean Long Life pads!
Caution! Do not fold the Long Life pads!
Caution! Avoid the Long Life pads touching any
metal object, such as belt buckle or necklace!
• Attach the Long Life pads on both shoulders
with the backbone in the centre.
E4 English
•Attach both Long Life pads on the upper arm
where you feel pain.
•Attach one Long Life pad to the sole of the foot
that feels cold and the other one on the calf.
Caution! Do not simultaneously attach the
Long Life pads on the soles of both feet!
• Attach the Long Life pads on both sides of the
joint where you feel pain.
• Attach both Long Life pads on the calf where
you feel pain.
• Attach both Long Life pads on the lower back
with the backbone in the centre.
7
Page 9
E4 English
1
10
1
1
10
1
1
10
1
1
10
1
1
10
1
5. Operation
Caution! Make sure that the components are
connected well and the Long Life pads are fixed
on the part of the body you wish to treat!
Caution! Do not pull on the electrode cord
during treatment!
Note: Turn Adjustment Dial-switch for intensity
(1-10) if required.
5.1 Treatment program
1 Turn On/0ff-switch to level 1.
ON
1
"Click"
5.2 Setting
1 Select Hyper mode or Soft mode.
For selecting Hyper mode press 3 seconds
Hyper button.
2 Select point pulse or wide pulse.
2 Select one of the twelve programs according to
1
your complaint.
8
3 Press repeat button to have previous treatment
program start over.
Treatment program runs for 15 minutes.
Page 10
6. End of treatment and care
After 15 minutes the massager stops automatically.
E4 English
OFF
"Click"
1 Stop program if required.
Caution! Stop treatment when you want to
change the treatment program!
Caution! Stop treatment when you want to move
a Long Life pad!
Caution! Stop treatment when you feel
discomfort with your body or skin!
Caution! Stop treatment when the massager is
not functioning properly or you feel discomfort!
3 Pinch the safety plug and remove it from the
main unit.
4 Disconnect the electrode cord from the Long
Life pads.
5 Wash the pads softly with your fingertips under
slow running water for about 3 seconds.
Caution! Do not use hot water!
2 Remove the Long Life pads and place the pads
on the Long Life pads holder.
9
Page 11
6 Sufficiently dry the Long Life pads.
-20
+60
Caution! Do not wipe the adhesive surfaces!
Caution! Let the adhesive surfaces of the
Long Life pads air-dry!
Caution! Adhesive surface sides up during
drying!
E4 English
9 Use a soft, slightly moistened cloth to clean the
main unit.
Caution! Do not wash and do not use petrol,
thinners or similar solvents!
7. Storage
7 Connect the electrode cord on the Long Life
pads and place the pads on the pad holder.
8 Wrap the electrode cord around the pad holder.
10
• Put the massager and the pad holder in the
soft storage case.
•Store the massager on a dry, closed place with
a temperature between -20º and 60ºC.
Caution! Remove the batteries for a long time
storage (more than three months)!
Page 12
E4 English
8. Troubleshooting & Maintenance
ProblemCauseRectification
Device will not Batteries inserted in wrongInsert batteries in correct direction
turn ondirection
Power turns off Long Life pads not attachedAttach Long Life pads correctly to the skin
too sooncorrectly to the skin
Power turns off Batteries weak/exhaustedFit two new identical 1.5V alkaline
while using massagerbatteries type AAALR03
Treatment period of 15 Restart treatment or turn off
minutes is over and power the massager
turns off automatically
Electrode cord brokenReplace electrode cord
It is difficult to attach Transparent film not peeled off Peel off film on the adhesive
Long Life pad to surface of Long Life pad
the skinLong Life pad appliedSufficiently dry Long Life pad
immediately after washing
Adhesive surface of Long Replace Long Life pad
Life pad damaged
Adhesive surface Use of Long Life pad
of Long Life pad during perspiring
is stickyLong Life pad washed too Leave Long Life pad in
long and/or too frequentlyfreezer for overnight
Long Life pads stored under
high temperature, high
humidity, direct sunshine
It is difficult toLong Life pads not attachedAttach Long Life pad firmly
feel stimulationcorrectly to the skinto the skin
Long Life pads overlap each Reattach Long Life pads with no overlap
other
Electrode cord not Connect electrode cord correctly
connected correctly
Applied intensity too weakIncrease the intensity by turning the dial switch
The skin turns Adhesive surface of LongWash adhesive surface of Long Life pads
red or the skin Life pads dirty or drysoftly with your fingertips for about 3 seconds
feels irritatedunder slow running water
Adhesive surface of Long Replace Long Life pads
Life pads damaged
8.1 Maintenance and spare parts
• Do not carry out repairs of any kind yourself. If
a defect occurs consult the customer service or
authorised dealer of Omron.
8.2 Replace batteries
• Remove the batteries from the battery
compartment and insert two new identical
batteries.
Attention! Disposal of
batteries and the Omron
E4 Tens massager should
be carried out in
accordance with the
national regulations for the
disposal of electronic
products.
11
Page 13
E4 English
9. Technical Data
Product NameOMRON E4 TENS massager
ModelHV-F128-E
Power supply3 VDC (2 1.5V alkaline batteries type AAALR03)
Battery lifeApprox. 3 months: when used 15 minutes a day continuously
Frequency generationApprox. 1 to 1200 Hz
Power consumptionApprox. 85 mA
Operating temperature and humidity 10°C to 40°C, 30 to 85% RH
Storage temperature and humidity-20°C to 60°C, 10 to 95% RH
Main unit dimensions60 (W) x 199 (H) x 21 (D) mm
WeightApprox. 155 g (including batteries)
AccessoriesElectrode cord
Specifications may be changed without prior notice.
Type BF = 0197
Read the instructions in this manual carefully.
Approx. 2 months: when used 15 minutes a day continuously
under Hyper mode
Set of Long Life pads
Batteries for monitor (2 identical 1.5V alkaline batteries type AAALR03)
Long Life pad holder
Soft fabric case
Instruction manual
This device fulfils the provisions of the EC directive 93/42/EEC (Medical Device Directive).
ManufacturerOmron Matsusaka Co. LTD., Japan.
EU-representativeOMRON HEALTHCARE EUROPE B.V.,
Affiliate CompaniesOMRON HEALTHCARE (UK) LTD, 18-20 The Business Park
12
Kruisweg 577, 2132 NA Hoofddorp
Postbus 13, NL 2130 AA Hoofddorp, The Netherlands
www.omron-healthcare.com