Page 1
DS89C21
Differential CMOS Line Driver and Receiver Pair
General Description
The DS89C21 is a differential CMOS line driver and receiver
pair, designed to meet the requirements of TIA/EIA-422-A
(RS-422) electrical characteristics interface standard. The
DS89C21 provides one driver and one receiver in a minimum footprint. The device is offered in an 8-pin SOIC package.
The CMOS design minimizes the supply current to 6 mA,
making the device ideal for use in battery powered or power
conscious applications.
The driver features a fast transition time specified at 2.2 ns,
and a maximum differential skew of 2 ns making the driver
ideal for use in high speed applications operating above
10 MHz.
The receiver can detect signals as low as 200 mV, and also
incorporates hysteresis for noise rejection. Skew is specified
at 4 ns maximum.
The DS89C21 is compatible with TTL and CMOS levels (DI
and RO).
Features
n Meets TIA/EIA-422-A (RS-422) and CCITT V.11
recommendation
n LOW POWER design—15 mW typical
n Guaranteed AC parameters:
— Maximum driver skew 2.0 ns
— Maximum receiver skew 4.0 ns
n Extended temperature range: −40˚C to +85˚C
n Available in SOIC packaging
n Operates over 20 Mbps
n Receiver OPEN input failsafe feature
Connection Diagram Truth Tables
Driver
Input Outputs
DI DO DO
*
HHL
LLH
Receiver
Inputs Output
RI–RI
*
RO
V
DIFF
≥ +200 mV H
V
DIFF
≤ −200 mV L
OPEN
†
H
†
Non-terminated
DS011753-1
Order Number DS89C21TM
See NS Package Number M08A
June 1998
DS89C21 Differential CMOS Line Driver and Receiver Pair
© 1998 National Semiconductor Corporation DS011753 www.national.com
Page 2
Absolute Maximum Ratings (Note 1)
If Military/Aerospace specified devices are required,
please contact the National Semiconductor Sales Office/
Distributors for availability and specifications.
Supply Voltage (V
CC
)7V
Driver Input Voltage (DI) −1.5V to V
CC
+ 1.5V
Driver Output Voltage (DO,
DO
*
) −0.5V to +7V
Receiver Input Voltage—V
CM
(RI, RI*)
±
14V
Differential Receiver Input
±
14V
Voltage—V
DIFF
(RI, RI*)
Receiver Output Voltage
(RO) −0.5V to V
CC
+0.5V
Receiver Output Current
(RO)
±
25 mA
Storage Temperature Range
(T
STG
) −65˚C to +150˚C
Lead Temperature (T
L
) +260˚C
(Soldering 4 sec.)
Maximum Junction
Temperature 150˚C
Maximum Package Power Dissipation
@
+25˚C
M Package 714 mW
Derate M Package 5.7 mW/˚C above
+25˚C
Recommended Operating
Conditions
Min Max Units
Supply Voltage (V
CC
) 4.50 5.50 V
Operating Temperature (T
A
) −40 +85 ˚C
Input Rise or Fall Time (DI) 500 ns
Electrical Characteristics (Notes 2, 3)
Over recommended supply voltage and operating temperature ranges, unless otherwise specified.
Symbol Parameter Conditions Pin Min Typ Max Units
DRIVER CHARACTERISTICS
V
IH
Input Voltage HIGH 2.0 V
CC
V
V
IL
Input Voltage LOW DI GND 0.8 V
I
IH,IIL
Input Current V
IN
=
V
CC
, GND, 2.0V, 0.8V 0.05±10 µA
V
CL
Input Clamp Voltage I
IN
=
−18 mA −1.5 V
V
OD1
Unloaded Output Voltage No Load DO,
DO
*
4.2 6.0 V
V
OD2
Differential Output Voltage R
L
=
100Ω 2.0 3.0 V
∆V
OD2
Change in Magnitude of V
OD2
5.0 400 mV
for Complementary Output States
V
OD3
Differential Output Voltage R
L
=
150Ω 2.1 3.1 V
V
OD4
Differential Output Voltage R
L
=
3.9 kΩ 4.0 6.0 V
V
OC
Common Mode Voltage R
L
=
100Ω 2.0 3.0 V
∆V
OC
Change in Magnitude of V
OC
2.0 400 mV
for Complementary Output States
I
OSD
Output Short Circuit Current V
OUT
=
0V −30 −115 −150 mA
I
OFF
Output Leakage Current V
CC
=
0V V
OUT
=
+6V 0.03 +100 µA
V
OUT
=
−0.25V −0.08 −100 µA
RECEIVER CHARACTERISTICS
V
TL,VTH
Differential Thresholds V
IN
=
+7V, 0V, −7V RI,
RI
*
−200±25 +200 mV
V
HYS
Hysteresis V
CM
=
0V 20 50 mV
R
IN
Input Impedance V
IN
=
−7V, +7V, Other=0V 5.0 9.5 kΩ
I
IN
Input Current Other Input=0V, V
IN
=
+10V +1.0 +1.5 mA
V
CC
=
5.5V and V
IN
=
+3.0V 0 +0.22 mA
V
CC
=
0V V
IN
=
+0.5V −0.04 mA
V
IN
=
−3V 0 −0.41 mA
V
IN
=
−10V −1.25 −2.5 mA
V
OH
Output HIGH Voltage I
OH
=
−6 mA V
DIFF
=
+1V RO 3.8 4.9 V
V
DIFF
=
OPEN 3.8 4.9 V
V
OL
Output LOW Voltage I
OL
=
+6 mA, V
DIFF
=
−1V 0.08 0.3 V
I
OSR
Output Short Circuit Current V
OUT
=
0V −25 −85 −150 mA
www.national.com 2
Page 3
Electrical Characteristics (Notes 2, 3) (Continued)
Over recommended supply voltage and operating temperature ranges, unless otherwise specified.
Symbol Parameter Conditions Pin Min Typ Max Units
DRIVER AND RECEIVER CHARACTERISTICS
I
CC
Supply Current No Load DI=VCCor GND V
CC
3.0 6 mA
DI=2.4V or 0.5V 3.8 12 mA
Switching Characteristics (Note 3)
Over recommended supply voltage and operating temperature ranges, unless otherwise specified.
Symbol Parameter Conditions Min Typ Max Units
DIFFERENTIAL DRIVER CHARACTERISTICS
t
PLHD
Propagation Delay LOW to HIGH R
L
=
100Ω (
Figures 2, 3
) 2 4.9 10 ns
t
PHLD
Propagation Delay HIGH to LOW C
L
=
50 pF 2 4.5 10 ns
t
SKD
Skew, |t
PLHD–tPHLD
| 0.4 2.0 ns
t
TLH
Transition Time LOW to HIGH (
Figures 2, 4
) 2.2 9 ns
t
THL
Transition Time HIGH to LOW 2.1 9 ns
RECEIVER CHARACTERISTICS
t
PLH
Propagation Delay LOW to HIGH C
L
=
50 pF (
Figures 5, 6
) 6 18 30 ns
t
PHL
Propagation Delay HIGH to LOW V
DIFF
=
2.5V 6 17.5 30 ns
t
SK
Skew, |t
PLH–tPHL
|V
CM
=
0V 0.5 4.0 ns
t
r
Rise Time (
Figure 7
) 2.5 9 ns
t
f
Fall Time 2.1 9 ns
Note 1: “Absolute Maximum Ratings” are those values beyond which the safety of the device cannot be guaranteed. They are not meant to imply that the devices
should be operated at these limits. The tables of “Electrical Characteristics” specify conditions for device operation.
Note 2: Current into device pins is defined as positive. Current out of device pins is defined as negative. All voltages are referenced to ground unless otherwise
specified.
Note 3: All typicals are given for V
CC
=
5.0V and T
A
=
25˚C.
Note 4: f=1 MHz, t
r
and tf≤ 6 ns.
Note 5: ESD Rating: HBM (1.5 kΩ, 100 pF) all pins ≥ 2000V.
EIAJ (0Ω, 200 pF) ≥ 250V
Parameter Measurement Information
DS011753-2
FIGURE 1. VODand VOCTest Circuit
www.national.com3
Page 4
Parameter Measurement Information (Continued)
DS011753-3
FIGURE 2. Driver Propagation Delay Test Circuit
DS011753-4
FIGURE 3. Driver Differential Propagation Delay Timing
DS011753-5
FIGURE 4. Driver Differential Transition Timing
DS011753-6
FIGURE 5. Receiver Propagation Delay Test Circuit
www.national.com 4
Page 5
Parameter Measurement Information (Continued)
DS011753-7
FIGURE 6. Receiver Propagation Delay Timing
DS011753-8
FIGURE 7. Receiver Rise and Fall Times
www.national.com5
Page 6
Physical Dimensions inches (millimeters) unless otherwise noted
LIFE SUPPORT POLICY
NATIONAL’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT OF NATIONAL SEMICONDUCTOR CORPORATION. As used herein:
1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into
the body, or (b) support or sustain life, and whose failure to perform when properly used in accordance
with instructions for use provided in the labeling, can
be reasonably expected to result in a significant injury
to the user.
2. A critical component in any component of a life support
device or system whose failure to perform can be reasonably expected to cause the failure of the life support
device or system, or to affect its safety or effectiveness.
National Semiconductor
Corporation
Americas
Tel: 1-800-272-9959
Fax: 1-800-737-7018
Email: support@nsc.com
www.national.com
National Semiconductor
Europe
Fax: +49 (0) 1 80-530 85 86
Email: europe.support@nsc.com
Deutsch Tel: +49 (0) 1 80-530 85 85
English Tel: +49 (0) 1 80-532 78 32
Français Tel: +49 (0) 1 80-532 93 58
Italiano Tel: +49 (0) 1 80-534 16 80
National Semiconductor
Asia Pacific Customer
Response Group
Tel: 65-2544466
Fax: 65-2504466
Email: sea.support@nsc.com
National Semiconductor
Japan Ltd.
Tel: 81-3-5620-6175
Fax: 81-3-5620-6179
Order Number DS89C21TM
NS Package Number M08A
DS89C21 Differential CMOS Line Driver and Receiver Pair
National does not assume any responsibility for use of any circuitry described, no circuit patent licenses are implied and National reserves the right at any time without notice to change said circuitry and specifications.
Loading...