Datasheet d45c12_d44c12 Datasheet

Download

Page 1

D45C12 (PNP), D44C12 (NPN)

Complementary Silicon Power Transistor

The D45C12 and D44C12 arefor general purpose driver or

medium power output stages in CW or switching applications.

Features

•Low Collector-Emitter Saturation Voltage - 0.5 V (Max)

•High f

•Low Leakage Current

•Pb-Free Packages are Available*

MAXIMUM RATINGS

Collector-Emitter Voltage

Emitter Base Voltage

Collector Current - Continuous

Total Power Dissipation @ TC = 25°C

Total Power Dissipation @ TA = 25°C

Operating and Storage Junction

Stresses exceeding Maximum Ratings may damage the device. Maximum Ratings are stress ratings only. Functional operation above the Recommended Operating Conditions is not implied. Extended exposure to stresses above the Recommended Operating Conditions may affect device reliability.

for Good Frequency Response

Rating

Peak (Note 1)

Temperature Range

Symbol

CEO

VCES

TJ, T

stg

Value

5.0

4.0

6.0

1.67

-55 to 150

Unit

Vdc

Adc

W/°C

°C

http://onsemi.com

4.0 AMPERE COMPLEMENTARY SILICON POWER

TRANSISTORS 80 VOLTS

TO-220AB

CASE 221A

STYLE 1

MARKING DIAGRAM

& PIN ASSIGNMENT

Collector

THERMAL CHARACTERISTICS

Characteristic

Thermal Resistance,

Junction-to-Case

Thermal Resistance,

Junction-to-Ambient

Maximum Lead Temperature for Soldering

Purposes: 1/8 in from Case for 5 Sec

1. Pulse Width v 6.0 ms, Duty Cycle v 50%.

*For additional information on our Pb-Free strategy and soldering details, please

download the ON Semiconductor Soldering and Mounting Techniques Reference Manual, SOLDERRM/D.

© Semiconductor Components Industries, LLC, 2007

November, 2007 - Rev. 2

Symbol

Max

4.2

275

Unit

°C/W

°C

1 Publication Order Number:

D4xC12G

AYWW

Base

Collector

x = 4 or 5 A = Assembly Location Y = Year WW = Work Week G = Pb-Free Package

3 Emitter

ORDERING INFORMATION

See detailed ordering and shipping information in the package dimensions section on page 2 of this data sheet.

D45C12/D

Page 2

D45C12 (PNP), D44C12 (NPN)

ELECTRICAL CHARACTERISTICS (T

= 25°C unless otherwise noted)

Characteristic

DC Current Gain

(VCE = 1.0 Vdc, IC = 0.2 Adc) (V

= 1.0 Vdc, IC = 1.0 Adc)

= 1.0 Vdc, IC = 2.0 Adc)

ELECTRICAL CHARACTERISTICS (T

= 25°C unless otherwise noted)

Characteristic

OFF CHARACTERISTICS

Collector Cutoff Current (VCE = Rated V

CES

, VBE = 0)

Emitter Cutoff Current (VEB = 5.0 Vdc)

ON CHARACTERISTICS

Collector-Emitter Saturation Voltage (IC = 1.0 Adc, IB = 50 mAdc)

Base-Emitter Saturation Voltage (IC = 1.0 Adc, IB = 100 mAdc)

DYNAMIC CHARACTERISTICS

Collector Capacitance (VCB = 10 Vdc, f = 1.0 MHz)

Gain Bandwidth Product (IC = 20 mA, VCE = 4.0 Vdc, f = 20 MHz)

SWITCHING TIMES

Symbol

CES

EBO

CE(sat)

BE(sat)

Min

40 20 20

Typ

0.135

0.85

125

Max

120

Max

0.1

0.5

1.3

Unit

Vdc

MHz

Delay and Rise Times (IC = 1.0 Adc, IB1 = 0.1 Adc)

Storage Time (IC = 1.0 Adc, IB1 = IB2 = 0.1 Adc)

Fall Time (IC = 1.0 Adc, IB1 = IB2 = 0.1 Adc)

td + t

550

350

ORDERING INFORMATION

Device Package Shipping

D45C12 TO-220AB

D45C12G TO-220AB

(Pb-Free)

D44C12 TO-220AB

50 Units / Rail

D44C12G TO-220AB

(Pb-Free)

†For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging

Specifications Brochure, BRD8011/D.

200

100

, DC CURRENT GAIN

90 80

70 60

0.04

0.07 0.1 0.2 0.3 1.0 2.0 4.0

0.4 0.7

IC, COLLECTOR CURRENT (AMPS)

Figure 1. Typical DC Current Gain

VCE = 1.0 Vdc TJ = 25°C

3.0

5.0

3.0

2.0

1.0

0.5

0.3

0.2

0.1

0.05

, COLLECTOR CURRENT (AMPS)

0.03

0.02

0.01

≤ 70°C

DUTY CYCLE ≤ 50%

1.0

2.0

5.0

3.0 7.0 30 50 70

10 20 100

VCE, COLLECTOR-EMITTER VOLTAGE (VOLTS)

Figure 2. Maximum Rated Forward Bias

†

1.0 ms 10 ms

0.1 ms

1.0 ms

Safe Operating Area

http://onsemi.com

Page 3

D45C12 (PNP), D44C12 (NPN)

PACKAGE DIMENSIONS

TO-220

CASE 221A-09

ISSUE AE

NOTES:

1. DIMENSIONING AND TOLERANCING PER ANSI

SEATING

-T-

PLANE

123

Y14.5M, 1982.

2. CONTROLLING DIMENSION: INCH.

3. DIMENSION Z DEFINES A ZONE WHERE ALL BODY AND LEAD IRREGULARITIES ARE ALLOWED.

DIM MIN MAX MIN MAX

A 0.570 0.620 14.48 15.75 B 0.380 0.405 9.66 10.28 C 0.160 0.190 4.07 4.82 D 0.025 0.035 0.64 0.88 F 0.142 0.161 3.61 4.09 G 0.095 0.105 2.42 2.66 H 0.110 0.155 2.80 3.93 J 0.014 0.025 0.36 0.64 K 0.500 0.562 12.70 14.27 L 0.045 0.060 1.15 1.52 N 0.190 0.210 4.83 5.33 Q 0.100 0.120 2.54 3.04 R 0.080 0.110 2.04 2.79 S 0.045 0.055 1.15 1.39 T 0.235 0.255 5.97 6.47 U 0.000 0.050 0.00 1.27 V 0.045 --- 1.15 --- Z --- 0.080 --- 2.04

MILLIMETERSINCHES

ON Semiconductor and are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. “Typical” parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer's technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner.

PUBLICATION ORDERING INFORMATION

LITERATURE FULFILLMENT:

Literature Distribution Center for ON Semiconductor P.O. Box 5163, Denver, Colorado 80217 USA Phone: 303-675-2175 or 800-344-3860 Toll Free USA/Canada Fax: 303-675-2176 or 800-344-3867 Toll Free USA/Canada Email: [email protected]

N. American Technical Support: 800-282-9855 Toll Free USA/Canada

Europe, Middle East and Africa Technical Support:

Phone: 421 33 790 2910

Japan Customer Focus Center

Phone: 81-3-5773-3850

http://onsemi.com

ON Semiconductor Website: www.onsemi.com

Order Literature: http://www.onsemi.com/orderlit

For additional information, please contact your loca Sales Representative

D45C12/D