Datasheet D2N48 Specification

The Best Relaytion

D2n Relay

D2n Relay

V23105

2 pole telecom relay, non-polarized,
Through Hole Type (THT)

Relay types: non-latching with 1 coil

Features

– Standard DIL relay

– Dimensions 20.3 x 10.1 x 10.43 mm, 0.800 x 0.400 x 0.450 inch

– Switching and continous current 3 A

– 2 changeover contacts (2 form C / DPDT)

– Single contacts

– Immersion cleanable

– Four different coil sensitivities

(150, 200, 400, > 500 mW)

– Surge voltage resistance meets FCC Part 68 requirement:

1.5 kV (10 / 160 µsec) between coil and contacts

Typical applications

– Communications equipment

– Office equipment

– Measurement and control equipment

– Entertainment electronics

– Medical Equipment

– Consumer electronics

LR 45064-27

E 48393

2

D2n Relay

V23105

THT Version

Mounting hole layout

View onto the component side of the PCB
(top view)

Dimensions

THT

V23105-A5xxx-A201

mm inch

L 20.2 ± 0.1 0.795 ± 0.004
W 10.0 ± 0.1 0.394 ± 0.004
H 11.43 ± 0.2 0.450 - 0.008
T 3.5 ± 0.3 0.138 ± 0.012
Tw 0.72 - 0.2 0.028 - 0.008
S 0.3 ± 0.1 0.012 ± 0.004

Basic grid 2.54 mm

Terminal assignment

Relay - top view

3

D2n Relay

V23105

Coil Data (values at 23°C)

Nominal Operate/set voltage range Release/ Nominal power Resistance Coil number

voltage reset voltage consumption

Unom Minimum Maximum Minimum

voltage U

Vdc Vdc Vdc Vdc mW W / ± 10 %

150 mW nominal power consumption

5 4.0 13.0 0.25 150 167 001
6 4.8 15.6 0.30 150 240 002

9 7.2 23.4 0.45 150 540 006
12 9.6 31.2 0.60 150 960 003
24 19.2 59.5 1.20 165 3480 005

200 mW nominal power consumption

3 2.1 6.7 0.15 200 45 308
5 3.5 11.2 0.25 200 125 301
6 4.2 13.5 0.30 200 180 302

9 6.3 20.3 0.45 200 405 306
12 8.4 27.0 0.60 200 720 303
24 16.8 54.1 1.20 200 2880 305
48 33.6 108.3 2.40 200 11520 307

I

voltage U

II

400 mW nominal power consumption

5 3.5 7.9 0.25 400 62 401
6 4.2 9.5 0.30 400 90 402

9 6.3 14.3 0.45 400 203 406
12 8.4 19.1 0.60 400 360 403
24 16.8 38.3 1.20 400 1440 405
48 33.6 76.6 2.40 400 5760 407

> 500 mW nominal power consumption

5 3.5 6.3 0.25 695 36 501

6 4.2 8.9 0.30 515 70 502

9 6.3 12.5 0.45 580 140 506
12 8.4 17.8 0.60 515 280 503
24 16.8 34.4 1.20 550 1050 505
48 33.6 67.3 2.40 575 4000 507

UI = Minimum voltage at 23° C after pre-energizing

with nominal voltage without contact current

UII = Maximum continous voltage at 23°

The operating voltage limits UI and UII depend on
the temperature according to the formula:

U

=K

· U

I

I 23° C

and

=K

· U

Il

Il 23° C

= Ambient temperature
= Minimum voltage at ambient temperature, t
= Maximum voltage at ambient temperature, t
= Factors (dependent on temperature), see diagram

amb

amb

U

t
U
U
k

amb

I

I tamb

II tamb

I tamb

II tamb

, k

II

Ambient temperature t

amb

[°C]

4

D2n Relay

V23105

Coil versions, BT 47 type / specification T4563 C (current tested)

Nominal Operating Nominal power Resistance British Coil number
voltage current consumption Telecom Code

Vdc mA mW W / ± 10 %

5 80 695 36 47 W / 5 475
10 32.5 500 200 47 W / 9 479
12 27 515 280 47 W / 6 476
24 14 550 1050 47 W / 7 477
48 7 575 4000 47 W / 8 478

Contact Data

Number of contacts and type
Contact assembly
Contact material
Limiting continuous current at max. ambient temperature
Maximum switching current
Maximum swichting voltage

Maximum switching capacity
Thermoelectric potential
Initial contact resistance / measuring condition: 10 mA / 20 mV
Electrical endurance at 230 Vac / 0.5 A

2 changeover contacts

single contacts

Silver-nickel, gold-covered

3 A

3 A
220 Vdc
250 Vac

60 W, 125 VA

> 10 mV

< 100 mW

typ. 3.0 x 105operations

Mechanical endurance
UL/CSA ratings

at 6 Vdc / 0.1 A
at 30 Vdc / 1 A
at 30 Vdc / 2 A

typ. 2.0 x 106 operations
typ. 5.0 x 105 operations
typ. 1.0 x 105 operations

typ. 15.0 x 106 operations

30 Vdc / 1.0 A

100 Vdc / 0.3 A

125 Vac / 0.5 A for 150 mW and 200 mW coil

125 Vac / 1.0 A for 400 mW and 500 mW coil

5

D2n Relay

Insulation

Insulation resistance at 500 Vdc
Dielectric test voltage (1 min)

between coil and contacts
between adjacent contact sets
between open contacts

Surge voltage resistance

V23105

> 109 W

1000 Vrms

750 Vrms
750 Vrms

according to FCC 68 (10 / 160 ms)
between coil and contacts
between adjacent contact sets
between open contacts

High Frequency Data

Capacitance

between coil and contacts
between adjacent contact sets
between open contacts

RF Characteristics

Isolation at 100 / 900 MHz
Insertion loss at 100 / 900 MHz
V.S.W.R. at 100 / 900 MHz

General data

Operate time at U
Release time without diode in parallel, typ. / max.
Release time with diode in parallel, typ. / max.
Bounce time at closing contact, typ. / max.
Maximum switching rate without load
Ambient temperature

150 and 200 mW coil
400 mW coil

500 mW coil
Thermal resistance
Maximum permissible coil temperature
Vibration resistance (function)

Shock resistance, half sinus, 11 ms

Degree of protection
Needle flame test
Mounting position
Processing information
Weight (mass)
Resistance to soldering heat

typ. / max.

nom

1500 V
1500 V
1500 V

max. 2 pF

max. 1.5 pF

max. 1 pF

-39.0 dB / -20.7 dB

-0.02 dB / -0.27 dB

1.04 / 1.40

5 ms / 7 ms
4 ms / 6 ms

7 ms / 10 ms

3 ms / 5 ms

20 operations/s

-25° C ... +85° C

-25° C ... +75° C

-25° C ... +60° C
< 100 K/W

105° C

10 g

10 to 55 Hz
10 g (function)
40 g (damage)

immersion cleanable, IP 67

application time 20 s, burning time < 15 s

any

Ultrasonic cleaning is not recommended

max. 2.5 g

260° C / 10 s

All data refers to 23° C unless otherwise specified.

6

D2n Relay

V23105

Packing

Tube for THT version - 25 relays per tube, 1000 relays per box

Ordering Information

Relay Code Tyco

Part Number

Dimensions in mm

Relay Code Tyco

Part Number

V23105A5001A201 8-1393792-5
V23105A5002A201 8-1393792-7
V23105A5003A201 8-1393792-8
V23105A5005A201 9-1393792-0
V23105A5006A201 9-1393792-1
V23105A5301A201 9-1393792-3
V23105A5302A201 9-1393792-5
V23105A5303A201 9-1393792-7
V23105A5305A201 9-1393792-9
V23105A5306A201 0-1393793-2
V23105A5307A201 0-1393793-3
V23105A5308A201 0-1393793-5
V23105A5401A201 0-1393793-6
V23105A5402A201 0-1393793-7
V23105A5403A201 0-1393793-8
V23105A5405A201 0-1393793-9

Ordering system:
V23105A5xxxA201 xxx = see coil table on page 4

V23105A5406A201 1-1393793-0
V23105A5407A201 1-1393793-1
V23105A5475A201 1-1393793-2
V23105A5476A201 1-1393793-3
V23105A5477A201 1-1393793-4
V23105A5478A201 1-1393793-5
V23105A5479A201 3-1393794-0
V23105A5501A201 1-1393793-6
V23105A5502A201 1-1393793-8
V23105A5503A201 1-1393793-9
V23105A5505A201 2-1393793-1
V23105A5506A201 2-1393793-3
V23105A5507A201 2-1393793-4

7

D2n Relay

V23105

IM Relays

4th generation slim line – low profile polarized 2 c/o telecom relay with
bifurcated contacts, available as non latching or latching relay with
1 coil. Nominal voltage range from 1.5... 24 V, coil power consumption
of 140... 200 mW, latching relays with 1 coil 100 mW. The IM relay is
available as through hole and surface mount type (J-Legs and Gull
Wings) and capable to switch loads up to 60 W/62,5 VA. Dielectric
strength fulfills the Bellcore requirements according GR 1089 (2,5 kV –
2 / 10 µs) and FCC part 68 (1,5 kV – 10 / 160 µs). The IM relay is
CECC/IECQ approved and certified in accordance with IEC/EN 60950
and UL1950. Dimensions approx. 10 x 6 mm board space and 5.65
mm height.

P2 Relays

3rd generation polarized 2 c/o telecom relay with bifurcated contacts,
available as non latching or latching relay with 1 or 2 coils. Nominal
voltage range from 3 ... 24 V, coil power consumption 140 mW,
latching relays with 1 coil 70 mW. The P2 relay is available as through
hole or surface mount type and capable to switch currents up to 5 A.
Dielectric strength fulfills the Bellcore requirements according GR
1089 (2,5 kV – 2 / 10 µs) and FCC part 68 (1,5 kV – 10 / 160 µs).
Dimensions approx. 15 x 7,5 mm board space and 10 mm height.

FX Relays

3rd generation polarized 2 c/o telecom relay with bifurcated contacts,
available as non latching or latching relay with 1 coil. Nominal voltage
range from 3 ... 48 V, coil power consumption of 80 ... 260 mW for the
high sensitive version, 140... 300 mW for the standard version,
latching relays with 1 coil 100 mW. The FX2 relay is available as
through hole type and capable to switch loads up to 60 W/62,5 VA.
Dielectric strength fulfills the Bellcore requirements according GR
1089 (2,5 kV – 2 / 10 µs) and FCC part 68 (1,5 kV – 10 / 160 µs). The
FX2 is CECC/IECQ approved and certified in accordance with IEC/EN
60950 and UL1950. Dimensions approx. 15 x 7,5 mm board space
and 10,7 mm height.

FT2 / FU2 Relays

3rd generation non polarized, non latching 2 c/o telecom relay with
bifurcated contacts. Nominal voltage range from 3 ... 48 V, coil power
consumption 200 ... 300 mW. Most sensitive 48 V relay. Available as
through hole and surface mount type. Dielectric strength fulfills the
Bellcore requirements according GR 1089 (2,5 kV – 2 / 10 µs) and
FCC part 68 (1,5 kV – 10 / 160 µs). The FT2/FU2 is CECC/IECQ
approved and certified in accordance with IEC/EN 60950 and
UL1950. Dimensions approx. 15 x 7,5 mm board space and 10 mm
height.

FP2 Relays

3rd generation polarized 2 c/o telecom relay with bifurcated contacts,
available as non latching or latching relay with 1 or 2 coils. Nominal
voltage range from 3 ... 48 V, coil power consumption of 80 ...
260 mW for the high sensitive version, 140... 300 mW for the
standard version, latching relays with 1 coil 100 mW.. The FP2 relay is
available as through hole type and capable to switch loads up to
30 W/62,5 VA. Dielectric strength fulfills FCC part 68 (1,5 kV – 10 /
160 µs). The FP2 is CECC/IECQ approved. Dimensions approx.
14 x 9 mm board space and 5 mm height.

MT2 / MT4

2nd generation non polarized, non latching 2 c/o and 4 c/o telecom
and signal relay with bifurcated contacts. Nominal voltage range from

4.5 ... 48 V, coil power consumption 150/200/300/400 and
550 mW, and 300 mW (MT4). Dielectric strength fulfills the

requirements according FCC part 68 (1,5 kV – 10 / 160 µs) for both
and the Bellcore requirements according GR 1089 (2,5 kV – 2 / 10 µs)
the MT4 only.
Dimensions MT2 approx. 20 x 10 mm board space and 11 mm height,

MT4 approx. 20 x15 mm board space and 11 mm height.

D2n Relays

2nd generation non polarized 2 c/o relay for telecom and various other
applications. Nominal voltage range from 3 ... 48 V, coil power

consumption from 150 .... 500 mW. The D2n relay is capable to switch

currents up to 3 A. Dielectric strength fulfills the requirements
according FCC part 68 (1,5 kV – 10 / 160 µs). Dimensions approx.
20 x10 mm board space and 11,5 mm height.

P1 Relays

Extremely sensitive, polarized 1 c/o relay with bifurcated contacts for a
wide range of applications, available as non latching or latching relay
with 1 or 2 coils. Nominal voltage range from 3 ... 24 V, coil power
consumption 65 mW, latching relays with 1 coil 30 mW. The P1 relay
is available as through hole or surface mount type and capable to
switch currents up to 1 A. Dielectric strength fulfills the requirements
according FCC part 68 (1,5 kV – 10 / 160 µs). Dimensions approx.
13 x 7,6 mm board space and 7 mm height for THT or 8 mm height for
SMT version.

W11 Relays

Low cost, non polarized 1 c/o relay for various applications. Nominal
voltage range from 3 ... 24 V, coil power consumption 450 mW,
sensitive versions 200 mW. The W11 relay is capable to switch
currents up to 3 A. Dielectric strength 1000 Vrms. Dimensions approx.
15,6 x 10,6 mm board space and 11,5 mm height.

Reed Relays

High sensitive, non polarized relay for telecom and various other
applications, available with 1 n/o, 2 n/o or 1c/o contacts. Nominal
voltage range from 5 ... 24 V, coil power consumption 50...280 mW
for 1 n/o and 125 ... 280 mW for 2 n/o or 1 c/o versions. Reedrelays
are available in DIP or SIL housing and capable to switch currents up to
0,5 A. Integrated diode and/or electrostatic shield optional. Dielectric
strength 1500 Vdc. Dimensions approx. 19,3 x 7 mm board space and
5 ... 7,5 mm height for DIP or 19,8 x 5 mm board space and 7,8 mm
height for SIL version.

Cradle Relays

Extremely reliable and mature relay family of 1st generation for various
signal switching applications. Available as non polarized, polarized /
latching and relay with AC coil. The benefit is the possibility of
combining various contact sets from 1 up to 6 poles, single and
bifurcated contacts, different contact materials with a coil voltage
range from 1,5 Vdc to 220 Vac. Cradle relays are available as dust
protected and hermetically sealed versions, with plug in or solder
terminals and are capable to switch currents up to 5 A. Forcibly guided
(linked) contact sets optional. Dielectric strength 500 Vrms.
Dimensions from approx. 19 x 24 to 19x35 mm board space and
30 mm height.

Other Relays

We offer a variety of different relay families for maintenance and
replacement purposes. These relays are up to 60 years old now, such
as Card Relay SN (V23030 / V23031 series), Small General Purpose
Relay (V23006 series), Small Polarized Relay (V23063 ... V23067 and
V23163 ... V23167 series). Accessories like sockets, hold down
springs, etc. optional.

8

Tyco Electronics AXICOM Ltd.
Seestrasse 295 - P.O. Box 220
CH-8804 Au-Wädenswil / Switzerland
Phone [phone]
Fax [phone]
E-mail: [e-mail]

Tyco Electronics AMP GmbH
Paulsternstrasse 26
D-13629 Berlin / Germany
Phone [phone]
Fax [phone]
E-mail: [e-mail]

Tyco Electronics EC Trutnov s.r.o.
Komenského 821
CZ-541 01 Trutnov / Czech Republic
E-mail: [e-mail]

Tyco Electronics Corporation
POB 3608,
Harrisburg, PA 17105, USA
Phone [phone]

9

April 2002 Rev. 2.05