Datasheet D2D12, D1D20 Specification

1-DCL | SERIES

PANEL MOUNT

Features

• Ratings from 7 A to 40 A @ 200 VDC and from 7 A to 10 A @ 500VDC

• Mosfet Output

• UL Approved, CE Compliant to EN60950-1

• Improved SEMS screw and washer

• Redesigned housing with anti-rotation barriers

• DC control

• EMC Compliant to Level 3

• Epoxy Free Design

PRODUCT SELECTION

Load Voltage 7 A 10 A 12 A 20 A 40 A

100 VDC D1D07L D1D12L D1D20L D1D40L

200 VDC D2D07L D2D12L D2D40L

400 VDC D4D07L D4D12L

500 VDC D5D07L D5D10L

OUTPUT SPECIFICATIONS

2

Description 7 A 12 A 20 A 40 A 7 A 12 A 40 A 7 A 12 A 7 A 10 A

Recommended Operating Voltage [Vdc]

Absolute Maximum Rating [Vdc] 100 100 100 100 200 200 200 400 400 500 500

Maximum Off-State Leakage Current @ Rated Voltage [mA]

Maximum Load Current [Adc]

Minimum Load Current [mA]

Maximum Surge Current (10msec) [Adc]

Maximum On-State Voltage Drop @ Rated Current [Vdc]

Maximum On-State Resistance [RDS-ON] [Ohms]

Thermal Resistance Junction to Case (Rjc) [°C/W]

Minimum Heat Sink for Rated Current @ 40°C [°C/ W]

Maximum Pulse Width Modulation Frequency [Hz]

5

1-72 1-72 1-72 1-72 1-150 1-150 1-150 1-300 1-300 1-385 1-385

0.1 0.2 0.3 0.3 0.1 0.3 0.3 0.3 0.3 0.2 0.3

3

4

7 12 20 40 7 12 40 7 12 7 10

1 1 1 1 1 1 1 1 1 1 1

23 28 42 106 22 31 106 18 36 19 29

0.5 0.9 0.8 1 1.5 0.7 0.8 2.3 2.6 3.5 3.3

0.07 0.072 0.039 0.025 0.21 0.062 0.021 0.33 0.22 0.5 0.33

2 2 1.71 0.68 1.24 0.71 0.22 0.56 0.39 0.6 0.43

5 3 2 1 3 3 0.7 2 1 1 0.7

5000 4000 3500 2500 3500 2000 950 1200 900 110 0 900

Page 1

www.sensata.com

INPUT SPECIFICATIONS

2

Description DC Control

Control Voltage Range 3.5-32 VDC

Maximum Reverse Voltage -32 VDC

Minimum Turn-On Voltage

Must Turn-Off Voltage 1 VDC

Minimum Input Current (for on-state) 10 mA

Maximum Input Current 15 mA

Nominal Input Impedance Current Regulated

Maximum Turn-On Time [μsec] 100

Maximum Turn-Off Time [μsec] 100

6

3.5 VDC

GENERAL SPECIFICATIONS

2

Description Parameters

Dielectric Strength, Input/Output/Base (50/60Hz) 3750 Vrms

Minimum Insulation Resistance (@ 500 VDC) 109 Ohms

Maximum Capacitance, Input/Output 8 pF

Ambient Operating Temperature Range

Ambient Storage Temperature Range -40 to 125 °C

Weight (typical) 2.66 oz (75.5 g)

Housing Material UL94 V-0

Baseplate Material Aluminum

Input Terminal Screw Torque Range (in-lb/Nm) 13-15 /1.5-1.7

Load Terminal Screw Torque Range (in-lb/Nm) 18-20 / 2-2.2

SSR Mounting Screw Torque Range (in-lb/Nm) 18-20 / 2-2.2

Input/Load Terminal Screw Torque Range (in-lb/Nm)

Input/Output Terminal Screw Thread Size #6-32 UNC / #8-32 UNC

Humidity per IEC60068-2-78 93% non-condensing

MTBF (Mean Time Between Failures) at 40°C ambient temperature

MTBF (Mean Time Between Failures) at 60°C ambient temperature

7

1

8

-40 to 100 °C

w/”K” option 8-10 / 0.9-1.13

21,395,130 hours (2,4 41 years)

11,545,504 hours (1,317 years)

Page 2

www.sensata.com

WIRING DIAGRAM

* Inductive loads must be diode suppressed.

OUTPUT

INPUT

Load

+

V

-

+

* *

+2

+3

Load

+

1

SO LI D STAT E RE LA Y

4

OUTPUT

INPUT

V

+

+2

+3

+

V

-

+

V

-

1

SO LI D STAT E RE LA Y

4

EQUIVALENT CIRCUIT BLOCK DIAGRAMS

3

+

DC

Trigger Circuit

-DC

Control

Circuit

4

Terminals

Input

Output

2

+DC

1

-DC

1

Recommended Wire Sizes

Wire Size

(Solid / Stranded)

24 AWG (0.2 mm2) / 0.2

[minimum]

2 x 12 AWG (3.3 mm2) /

3.3 [maximum]

20 AWG (0.5 mm2) /

0.518 [minimum]

2 x 10 AWG (5.3 mm2)

/ 5.3

2 x 8 AWG (8.4 mm2) /

8.4 [maximum]

Input Current vs Input Voltage

14

12

10

8

6

4

Input Current (mA)

2

0

Standard Regulated “DC” Inputs

5

10 15 20 25 30 35

Wire Pull-Out

Strength (lbs)[N]

10 [44.5]

90 [400]

30 [133]

110 [490]

90 [400]

DC Input Voltage

MECHANICAL SPECIFICATIONS

2

Tolerances: ±0.02 in / 0.5 mm All dimensions are in: inches [millimeters]

Screw Termination Hex Standoff Termination (“K” Option)

1.88

[47.6]

1.1

[27.9]

0.49

[12.4]

OUTPUT

1

SO LI D STAT E RE LA Y

4

INPUT

1.0

[25.4]

1.75

[44.5]

+2

+3

Mounting Hole/Slot

0.19 [4.9] DIA.

1.7

[43.2]

0.89

[22.6]

2.25

[57.3]

1.88

[47.6]

1.1

[27.9]

0.49

[12.4]

OUTPUT

1

SO LI D STAT E RE LA Y

INPUT

4

1.0

[25.4]

1.75

[44.5]

Mounting Hole/Slot

0.19 [4.9] DIA.

+2

[43.2]

+3

1.7

1

1.04

[26.4]

(2 places)

2.25

[57.3]

0.93

[23.6]

(4 places)

1.0

[25.4]

(2 places)

Page 3

www.sensata.com

SURGE CURRENT INFORMATION

S

rge

u

rg

u

rg

u

rg

u

rg

u

rg

u

D1D07L

ra

u

D

D1D20L

ra

u

D

e

D2D07L

ra

u

D

e

D2D40L

ra

u

D

e

D4D12L

ura

D

e

D5D10L

ra

u

D

e

)

c

se

(m

n

tio

)

c

se

(m

n

tio

n

tio

n

tio

n

tio

n

tio

)

c

se

(m

)

c

se

(m

)

c

se

(m

)

c

se

(m

60

50

40

30

20

Surge Current (Am p)

10

0

0.1 1 10 100 1000

100

80

60

40

20

Surge Current (Am p)

0

0.1 1 10 100 1000

50

40

30

20

10

Surge Current (Am p)

0

0.1 1 10 100 1000

240 220 200 180 160 140 120 100

80 60

Surge Current (Am p)

40 20

0

0.1 1 10 100 1000

70

60

50

40

30

20

Surge Current (Am p)

10

0

0.1 1 10 100 1000

70

60

50

40

30

20

Surge Current (Am p)

10

0

0.1 1 10 100 1000

Duty Factor 10%

Duty Factor 20%

Duty Factor 50%

80

70

60

50

40

30

20

Surge Current (Am p)

10

0

0.1 1 10 100 1000

300

250

200

150

100

50

Surge Current (Amp)

0

0.1 1 10 100 1000

70

60

50

40

30

20

Surge Current (Am p)

10

0

0.1 1 10 100 1000

50

40

30

20

10

Surge Current (Am p)

0

0.1 1 10 100 1000

40

30

20

10

Surge Current (Am p)

0

0.1 1 10 100 1000

Period

Pulse

Wide

D1D12L

)

c

se

(m

n

tio

ra

u

D

e

rg

u

S

D1D40L

)

c

se

n

(m

tio

ra

u

D

e

rg

u

S

D2D12L

)

c

se

(m

n

tio

ra

u

D

e

rg

u

S

D4D07L

)

c

se

(m

n

tio

ura

D

e

rg

u

S

D5D07L

)

c

se

n

(m

tio

ra

u

D

e

rg

u

S

For Pulse Wide Modulation applications select the curve according duty factor and pulse duration as following.

Duty Factor =

(i) for Single Surge Pulse Tc=40°C ;Tj 175°C

(ii) for Repetitive Surge Pulse Tc=40°C ;Tj 130°C

Pulse Wide

Period

x100 (%)

Page 4

www.sensata.com

THERMAL DERATE INFORMATION

(iii) SSR metal base plate acting as heat sink, it must be exposed to free ambient air.

D1D07L

5°C/W

7

6

5

4

3

2

1

Load Current (Amps)

0

20 30 40 50 60 70 80 90 100

Ambient Temperature (ºC)

No Heat Sink (iii)

D1D40L

1°C/W

40

30

20

10

Load Current (Amps)

0

20 30 40 50 60 70 80 90 100

Ambient Temperature (ºC)

3°C/W

5°C/W

D2D40L

0.7°C/W

40

30

20

10

Load Current (Amps)

0

20 30 40 50 60 70 80 90 100

Ambient Temperature (ºC)

1.5°C/W

7

6

5

4

3

2

Load Current (Amps)

1

0

20 30 40 50 60 70 80 90 100

5°C/W

1°C/W

Ambient Temperature (ºC)

D5D07L

3°C/W

D1D12L

3°C/W

12

8

4

Load Current (Amps)

0

20 30 40 50 60 70 80 90 100

5°C/W

Ambient Temperature (ºC)

No Heat Sink

D2D07L

3°C/W

7

6

5

4

3

2

Load Current (Amps)

1

0

20 30 40 50 60 70 80 90 100

5°C/W

Ambient Temperature (ºC)

No Heat Sink (iii)

D4D07L

2°C/W

7

6

5

4

3

2

Load Current (Amps)

1

0

20 30 40 50 60 70 80 90 100

5ºC/W

3°C/W

Ambient Temperature (ºC)

No Heat Sink

10

8

6

4

2

Load Current (Amps)

0

20 30 40 50 60 70 80 90 100

(iii)

0.7°C/W

D1D20L

2°C/W

20

15

10

5

Load Current (Amps)

0

20 30 40 50 60 70 80 90 100

3°C/W

Ambient Temperature (ºC)

No Heat Sink

D2D12L

3°C/W

12

10

8

6

4

2

Load Current (Amps)

0

20 30 40 50 60 70 80 90 100

5°C/W

Ambient Temperature (ºC)

No Heat Sink (iii)

D4D12L

1°C/W

12

10

8

6

4

2

Load Current (Amps)

0

20 30 40 50 60 70 80 90 100

Ambient Temperature (ºC)

2°C/W

5ºC/W

D5D10L

2°C/W

Ambient Temperature (ºC)

5°C/W

(iii)

Page 5

www.sensata.com

ACCESSORIES

New Accessories! Protective Cover & Hardware Kits

Protective Cover Part number: KS101

Clear plastic cover compatible with all new S1 designs. Safety covers provide added protection from electric shock when installing or checking equipment.

Recommended Accessories

Cover Hardware Kit Lug Terminal Thermal PadHeat Sink Part No.

KS101 HK1

HK4

HS501DR

HS301 / HS301DR

HS251

HS201 / HS201DR

HS202 / HS202DR

HS172

HS151 / HS151DR HS122 / HS122DR HS103 / HS103DR

HS101 HS073 HS072 HS053 HS033 HS023

Hardware Kit Part number: HK4

Thermal

Resistance [ºC/W]

5.0

3.0

2.5

2.0

1.7

1.5

1.2

1.0

0.7

0.5

0.36

0.25

Bag with 2 square brass accessories and 2 screw 8-32 x 5/8 for output. Used to mount TMR1 lug terminals.

TRM1

TRM6

HS P-1 HSP-2

Page 6

www.sensata.com

AVAILABLE OPTIONS

Example : D1D07-LK

Not all part number combinations are available.

Contact Crydom Technical Support for information on the availability of a speciﬁc part number.

D 1D 07

Series*

Operating Voltage*

1D: 1-100 VDC 2D: 1-200 VDC 4D: 1-4 00 VDC 5D: 1-500 VDC

Rated Load Current*

07: 7 Amps 10: 10 Amps (500 VDC only) 12: 12 Amps (not for 500 VDC) 20: 20 Amps (100 VDC only) 40: 40 Amps (100 & 200 VDC only)

Termination Blank**

Screws & clamps K: Installed standoffs with screws for PC Board mounting

* Required for valid part number **For options only and not required for valid part number

1

-

L K

Page 7

www.sensata.com

GENERAL NOTES

(1)

Option “K” is designed and tested for use with printed circuit boards or ring/fork terminals having a thickness between 0.031 and 0.093 inches (0.79 to 2.36 mm).

(2)

All parameters at Tc=25°C unless otherwise speciﬁed.

(3)

Heat sinking required, see derating curves.

(4)

Low current loads and high ambient temperature can affect turn-on time.

(5)

8VDC Minimum control voltage. Resistive loads only. Consider switching losses; at maximum frequency reduce to 75% output current.

(6)

Increase minimum voltage by 1V for operations from -20 to -40°C.

(7)

Decrease maximum control voltage 1.35V/°C above 80°C ambient temperature.

(8)

All parameters at 50% power rating and 100% duty cycle (contact Crydom tech support for detailed report).

For additional information or specic questions, contact Crydom Technical Support

AGENCY APPROVALS & CERTIFICATIONS

EN60950-1: Meets the requirements of sections1.5: 1,7: 2.9: 2.10.5.3: 4.2: 4.5: 4.7: IEC 61000-4-2 Electrostatic Discharge Level 3 IEC 61000-4-4 Electrically Fast Transients Level 3 IEC 61000-4-5 Electrical Surges Level 3

E116 950

WARNINGS

RISK OF MATERIAL DAMAGE AND HOT ENCLOSURE

• The product’s side panels may be hot, allow the product to cool before touching

• Follow proper mounting instructions including torque values

• Do not allow liquids or foreign objects to enter this product

Failure to follow these instructions can result in serious injury, or equipment damage.

HAZARD OF ELECTRIC SHOCK, EXPLOSION OR ARC FLASH

• Disconnect all power before installing or working with this equipment

• Verify all connections and replace all covers before turning on power

Failure to follow these instructions will result in death or serious injury.

Sensata Technologies, Inc. (“Sensata”) data sheets are solely intended to assist designers (“Buyers”) who are developing systems that incorporate Sensata products (also referred to herein as “components”). Buyer understands and agrees that Buyer remains responsible for using its independent analysis, evaluation and judgment in designing Buyer’s systems and products. Sensata data sheets have been created using standard laboratory conditions and engineering practices. Sensata has not conducted any testing other than that speciﬁcally described in the published documentation for a particular data sheet. Sensata may make corrections, enhancements, improvements and other changes to its data sheets or components without notice. Buyers are authorized to use Sensata data sheets with the Sensata component(s) identiﬁed in each particular data sheet. HOWEVER, NO OTHER LICENSE, EXPRESS OR IMPLIED, BY ESTOPPEL OR OTHERWISE TO ANY OTHER SENSATA INTELLECTUAL PROPERTY RIGHT, AND NO LICENSE TO ANY THIRD PARTY TECHNOLOGY OR INTELLECTUAL PROPERTY RIGHT, IS GRANTED HEREIN. SENSATA DATA SHEETS ARE PROVIDED “AS IS”. SENSATA MAKES NO WARRANTIES OR REPRESENTATIONS WITH REGARD TO THE DATA SHEETS OR USE OF THE DATA SHEETS, EXPRESS, IMPLIED OR STATUTORY, INCLUDING ACCURACY OR COMPLETENESS. SENSATA DISCLAIMS ANY WARRANTY OF TITLE AND ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, QUIET ENJOYMENT, QUIET POSSESSION, AND NON-INFRINGEMENT OF ANY THIRD PARTY INTELLECTUAL PROPERTY RIGHTS WITH REGARD TO SENSATA DATA SHEETS OR USE THEREOF. All products are sold subject to Sensata’s terms and conditions of sale supplied at www.sensata.com SENSATA ASSUMES NO LIABILITY FOR APPLICATIONS ASSISTANCE OR THE DESIGN OF BUYERS’ PRODUCTS. BUYER ACKNOWLEDGES AND AGREES THAT IT IS SOLELY RESPONSIBLE FOR COMPLIANCE WITH ALL LEGAL, REGULATORY AND SAFETY-RELATED REQUIREMENTS CONCERNING ITS PRODUCTS, AND ANY USE OF SENSATA COMPONENTS IN ITS APPLICATIONS, NOTWITHSTANDING ANY APPLICATIONS-RELATED INFORMATION OR SUPPORT THAT MAY BE PROVIDED BY SENSATA. Mailing Address: Sensata Technologies, Inc., 529 Pleasant Street, Attleboro, MA 02703, USA.

Rev. 03/29/18 ECN 20395 FDE-07-01 Rev. B

Page 8

CONTACT US

Americas

+1 (877) 502 5500 sales.crydom@sensata.com

Europe, Middle East & Africa

+44 (1202) 416170 ssr-info.eu@sensata.com

Asia Paciﬁc

sales.isasia@list.sensata.com

China +86 (21) 2306 1500 Japan +81 (45) 277 7117 Korea +82 (31) 601 2004 India +91 (80) 67920890 Rest of Asia +886 (2) 27602006

ext 2808

www.sensata.com