Datasheet CR2427S Datasheet (Philips)

DISCRETE SEMICONDUCTORS

DATA SH EET

CR2427S

Video driver hybrid amplifier

Product specification
File under Discrete Semiconductors, SC05

Philips Semiconductors

1995 Feb 09

Philips Semiconductors Product specification

Video driver hybrid amplifier CR2427S

FEATURES

• Typical transition times (10 to 90%)
with CL= 8.5 pF:

– at 35 V (p-p) swing

tr= 2.2 ns; tf= 2.0 ns

– at 40 V (p-p) swing

tr= 2.3 ns; tf= 2.1 ns

– at 50 V (p-p) swing

tr= 2.5 ns; tf= 2.2 ns

• Low power consumption

• Minimum small signal

bandwidth 130 MHz

• Very fast slew rate; 15000 V/µs

• Excellent grey-scale linearity

• Unconditional stability

• Gold metallization ensures

excellent reliability.

APPLICATIONS

It is designed for application in
cathode-ray tube (CRT) drivers in
high-resolution colour and
monochrome monitors.

DESCRIPTION

Hybrid amplifier module mounted in

handbook, 2 columns

SOT348 package.

PINNING

PIN DESCRIPTION

1
2
3
4
5

input
ground
supply voltage (V
ground
output

)

S

15

Front view

MBB932

Fig.1 SOT348.

LIMITING VALUES

In accordance with the Absolute Maximum Rating System (IEC 134).

SYMBOL PARAMETER MIN. MAX. UNIT

V

S

T

mb

supply voltage (DC) − 70 V
operating mounting base

−20 +100 °C

temperature; note 1

T

stg

storage temperature −40 +125 °C

Note

1. To ensure proper thermal contact, a layer of heatsink compound should be
applied between module and heatsink.

1995 Feb 09 2

Philips Semiconductors Product specification

Video driver hybrid amplifier CR2427S

CHARACTERISTICS

T

=25°C; CL= 8.5 pF; R1 = 215 Ω; C1 = 50 pF (see Fig.10); unless otherwise specified.

mb

SYMBOL PARAMETER CONDITIONS MIN. TYP. MAX. UNIT

= 60 V; 40 V (p-p) output swing with 30 V (DC) offset; unless otherwise specified

V

S

I

S

V

I

V

O

t

r

t

f

= 65 V; 50 V (p-p) output swing with 32.5 V (DC) offset; unless otherwise specified

V

S

I

S

V

I

V

O

t

r

t

f

V

= 60 V or 65 V; 40 V (p-p) or 50 V (p-p) output swing with 30 V (DC) or 32.5 V (DC) offset;

S

unless otherwise specified

P

tot

B

s

V

tilt

V

os

NLN non-linearity V
A

V

V

G

supply current input and output open 39 45 51 mA
input voltage (DC) input and output open 1.3 1.6 1.9 V
output voltage (DC) input and output open 28 31 34 V
rise time transient response 10 to 90%; note 1 − 2.3 2.9 ns
fall time transient response 10 to 90%; note 1 − 2.1 2.6 ns

supply current input and output open − 50 57 mA
input voltage (DC) input and output open 1.4 1.75 2.1 V
output voltage (DC) input and output open 29 32 35 V
rise time transient response 10 to 90%; note 2 − 2.5 3.2 ns
fall time transient response 10 to 90%; note 2 − 2.2 3.2 ns

total power dissipation 50 MHz square wave − 4.6 6 W
small signal bandwidth between −3 dB points; note 3 130 145 − MHz
low frequency tilt voltage 1 kHz square wave − 1.3 1.5 V
overshoot voltage varied by C1; see Fig.10 − 310%

= 5 to 55 V − 25%

O

DC voltage gain 50 Ω source; note 4 11.2 12.4 13.2
insertion gain 50 Ω source; note 5 160 180 200

Notes

1. Input signal is a nominal 100 kHz square wave of 3.25 V (p-p), with 1.5 V (DC) offset (50 Ω source).

2. Input signal is a nominal 100 kHz square wave of 3.4 V (p-p), with 1.65 V (DC) offset (50 Ω source).

3. Sine wave output signal: 1 V (p-p).

4. Measured V

(Figs 2 and 6) at input test circuit (see Fig.10).

O/VI

5. Measured VO/VI (Figs 3 and 7) at input module (see Fig.10).

1995 Feb 09 3

Philips Semiconductors Product specification

Video driver hybrid amplifier CR2427S

handbook, halfpage

5

V

I

(V)

3

1

1

020

VS=60V; Tmb=25°C; CL= 8.5pF; R1 = 215 Ω; C1 = 50 pF;
40 V (p-p) output swing with 30 V (DC) offset (see Fig.10).

40 60

VO(V)

Fig.2 Input voltage at input test-circuit as a

function of output voltage; typical values.

MLB868

1.8

handbook, halfpage

V

I

(V)

1.6

1.4

1.2
0 204060

VS=60V; Tmb=25°C; CL= 8.5 pF; R1 = 215 Ω; C1 = 50 pF;
40 V (p-p) output swing with 30 V (DC) offset (see Fig.10).

V (V)

O

Fig.3 Input voltage at input module as a function

of output voltage; typical values.

MLB867

3.0

handbook, halfpage

t

r

(ns)

2.6

2.2

1.8
6 8 10 12 14 16

VS=60V; Tmb=25°C; CL= 8.5 pF; R1 = 215 Ω; C1 = 50 pF;
40, 35, 30 V (p-p) output swing with 30 V (DC) offset.

MRA627 - 1

40 V (p-p)

35 V (p-p)

30 V (p-p)

L

Fig.4 Rise time transient response as a function

of load capacitance; typical values.

3.0

handbook, halfpage

t

f

(ns)

2.6

2.2

1.8

(pF)C

6 8 10 12 14 16

VS=60V; Tmb=25°C; CL= 8.5 pF; R1 = 215 Ω; C1 = 50 pF;
40, 35, 30 V (p-p) output swing with 30 V (DC) offset.

MRA628 - 1

40 V (p-p)

35 V (p-p)

30 V (p-p)

CL(pF)

Fig.5 Fall time transient response as a function of

load capacitance; typical values.

1995 Feb 09 4

Philips Semiconductors Product specification

Video driver hybrid amplifier CR2427S

handbook, halfpage

5

V

I

(V)

3

1

1

0204060

VS=65V; Tmb=25°C; CL= 8.5 pF; R1 = 215 Ω; C1 = 50 pF;
50 V (p-p) output swing with 32.5 V (DC) offset (see Fig.10).

V

O

Fig.6 Input voltage at input test-circuit as a

function of output voltage; typical values.

MLB869

(V)

2.0

handbook, halfpage

V

I

(V)

1.8

1.6

80

1.4
0 204060

VS=65V; Tmb=25°C; CL= 8.5 pF; R1 = 215 Ω; C1 = 50 pF;
50 V (p-p) output swing with 32.5 V (DC) offset (see Fig.10).

MLC752

VO(V)

80

Fig.7 Input voltage at input module as a function

of output voltage; typical values.

3.4

handbook, halfpage

t

r

(ns)

3.0

2.6

2.2
6 101418

VS=65V; Tmb=25°C; CL= 8.5 pF; R1 = 215 Ω; C1 = 50 pF;
50 V (p-p) output swing with 32.5 V (DC) offset.

MRA617 - 1

(pF)C

L

Fig.8 Rise time transient response as a function

of load capacitance; typical values.

3.2

handbook, halfpage

t

f

(ns)

2.8

2.4

2.0
6101418

VS=65V; Tmb=25°C; CL= 8.5 pF; R1 = 215 Ω; C1 = 50 pF;
50 V (p-p) output swing with 32.5 V (DC) offset.

MRA615 - 1

CL(pF)

Fig.9 Fall time transient response as a function of

load capacitance; typical values.

1995 Feb 09 5

Philips Semiconductors Product specification

Video driver hybrid amplifier CR2427S

V

handbook, full pagewidth

C2

S

PULSE

GENERATOR

input
50 Ω

C1

R1

BIAS
UNIT

3

1

CR2427S

TEST
FIXTURE
CR2427S

POWER
SUPPLY

4

5

2

output

C

L

FET

PROBE

Fig.10 CRT amplifier test-circuit and block diagram.

SAMPLING

OSCILLOSCOPE

MAM120

Components used in test-circuit (see Fig.10)

DESIGNATION DESCRIPTION VALUE

C

1

C

2

variable capacitor 10 to 120 pF (typ. 50 pF)
chip capacitor 10 nF

R1 resistor typ. 215 Ω

Equipment used in test-circuit (see Fig.10)

EQUIPMENT TYPE DESCRIPTION

Pulse generator Pico Second; Model 2600B
Bias unit Pico Second; Model 5555
Power supply Philips; Model PE1541, 80 V
FET probe Philips; Model PM8943, attenuation 100 : 1
Sampling oscilloscope Tektronix; Model 11803, sampling head SD24

1995 Feb 09 6

Philips Semiconductors Product specification

Video driver hybrid amplifier CR2427S

handbook, full pagewidth

input

180 Ω

10 nF
100 V

6.4 kΩ

180 Ω

150 kΩ

22 nF
100 V

680 pF

100 V

3 kΩ

150

82

pF

47 Ω

82

pF

pF

6.8 Ω

150 pF

6.8 Ω

MLB839

22 nF

100 V

10 Ω

1 nF

10 Ω

30

Ω

30

Ω

supply

3 kΩ

output

Fig.11 Internal circuit.

1995 Feb 09 7

Philips Semiconductors Product specification

Video driver hybrid amplifier CR2427S

PACKAGE OUTLINE

handbook, full pagewidth

23.5
max

6

min

27.2 max

25.5 max

4.15

3.85

5

12345

3.8

max

5.08
(4x)

0.51

0.38

M

O

0.25

1.8

2

13.8
max

0.25

6

max

MBB931

Dimensions in mm.
Heatsink compound must be applied sparingly and evenly distributed.

Fig.12 SOT348.

1995 Feb 09 8

Philips Semiconductors Product specification

Video driver hybrid amplifier CR2427S

DEFINITIONS

Data sheet status

Objective specification This data sheet contains target or goal specifications for product development.
Preliminary specification This data sheet contains preliminary data; supplementary data may be published later.
Product specification This data sheet contains final product specifications.

Limiting values

Limiting values given are in accordance with the Absolute Maximum Rating System (IEC 134). Stress above one or
more of the limiting values may cause permanent damage to the device. These are stress ratings only and operation
of the device at these or at any other conditions above those given in the Characteristics sections of the specification
is not implied. Exposure to limiting values for extended periods may affect device reliability.

Application information

Where application information is given, it is advisory and does not form part of the specification.

LIFE SUPPORT APPLICATIONS

These products are not designed for use in life support appliances, devices, or systems where malfunction of these
products can reasonably be expected to result in personal injury. Philips customers using or selling these products for
use in such applications do so at their own risk and agree to fully indemnify Philips for any damages resulting from such
improper use or sale.

1995 Feb 09 9

Philips Semiconductors Product specification

Video driver hybrid amplifier CR2427S

NOTES

1995 Feb 09 10

Philips Semiconductors Product specification

Video driver hybrid amplifier CR2427S

NOTES

1995 Feb 09 11

Philips Semiconductors – a worldwide company

Argentina: IEROD, Av. Juramento 1992 - 14.b, (1428)

BUENOS AIRES, Tel. [phone], Fax. [phone]

Australia: 34 Waterloo Road, NORTH RYDE, NSW 2113,

Tel. [phone], Fax. [phone]

Austria: Triester Str. 64, A-1101 WIEN, P.O. Box 213,

Tel. [phone], Fax. [phone]

Belgium: Postbus 90050, 5600 PB EINDHOVEN, The Netherlands,

Tel. [phone], Fax. [phone]

Brazil: Rua do Rocio 220 - 5

CEP: 04552-903-SÃO PAULO-SP, Brazil.
P.O. Box 7383 (01064-970).
Tel. [phone], Fax. [phone]

Canada: PHILIPS SEMICONDUCTORS/COMPONENTS:

Tel. [phone], Fax. [phone]

Chile: Av. Santa Maria 0760, SANTIAGO,

Tel. [phone], Fax. [phone]

Colombia: IPRELENSO LTDA, Carrera 21 No. 56-17,

77621 BOGOTA, Tel. [phone],
Fax. [phone]

Denmark: Prags Boulevard 80, PB 1919, DK-2300 COPENHAGEN S,

Tel. [phone], Fax. [phone]

Finland: Sinikalliontie 3, FIN-02630 ESPOO,

Tel. [phone], Fax. [phone]

France: 4 Rue du Port-aux-Vins, BP317,

92156 SURESNES Cedex,
Tel. [phone], Fax. [phone]

Germany: P.O. Box 10 63 23, 20043 HAMBURG,

Tel. [phone], Fax. [phone].

Greece: No. 15, 25th March Street, GR 17778 TAVROS,

Tel. [phone] 911, Fax. [phone]

Hong Kong: PHILIPS HONG KONG Ltd., 15/F Philips Ind. Bldg.,

24-28 Kung Yip St., KWAI CHUNG, N.T.,
Tel. [phone], Fax. [phone] 6009

India: Philips INDIA Ltd, Shivsagar Estate, A Block ,

Dr. Annie Besant Rd. Worli, Bombay 400 018
Tel. [phone], Fax. [phone]

Indonesia: Philips House, Jalan H.R. Rasuna Said Kav. 3-4,

P.O. Box 4252, JAKARTA 12950,
Tel. [phone], Fax. [phone]

Ireland: Newstead, Clonskeagh, DUBLIN 14,

Tel. [phone], Fax. [phone]

Italy: PHILIPS SEMICONDUCTORS S.r.l.,

Piazza IV Novembre 3, 20124 MILANO,
Tel. [phone], Fax. [phone]

Japan: Philips Bldg13-37, Kohnan 2-chome, Minato-ku, TOKYO 108,

Tel. [phone], Fax. [phone]

Korea: (Republic of) Philips House, 260-199 Itaewon-dong,

Yongsan-ku, SEOUL, Tel. [phone], Fax. [phone]

Malaysia: No. 76 Jalan Universiti, 46200 PETALING JAYA,

SELANGOR, Tel. [phone], Fax. [phone]

Mexico: 5900 Gateway East, Suite 200, EL PASO, TX 79905,

Tel. [phone], Fax. [phone]

Netherlands: Postbus 90050, 5600 PB EINDHOVEN, Bldg. VB

Tel. [phone], Fax. [phone]

New Zealand: 2 Wagener Place, C.P.O. Box 1041, AUCKLAND,

Tel. [phone], Fax. [phone]

Norway: Box 1, Manglerud 0612, OSLO,

Tel. [phone], Fax. [phone]

th

floor, Suite 51,

Pakistan: Philips Electrical Industries of Pakistan Ltd.,

Exchange Bldg. ST-2/A, Block 9, KDA Scheme 5, Clifton,
KARACHI 75600, Tel. [phone],
Fax. [phone].

Philippines: PHILIPS SEMICONDUCTORS PHILIPPINES Inc,

106 Valero St. Salcedo Village, P.O. Box 2108 MCC, MAKATI,
Metro MANILA, Tel. [phone], Fax. [phone]

Portugal: PHILIPS PORTUGUESA, S.A.,

Rua dr. António Loureiro Borges 5, Arquiparque - Miraflores,
Apartado 300, 2795 LINDA-A-VELHA,
Tel. [phone], Fax. [phone].

Singapore: Lorong 1, Toa Payoh, SINGAPORE 1231,

Tel. [phone], Fax. [phone]

South Africa: S.A. PHILIPS Pty Ltd.,

195-215 Main Road Martindale, 2092 JOHANNESBURG,
P.O. Box 7430 Johannesburg 2000,
Tel. [phone], Fax. [phone].

Spain: Balmes 22, 08007 BARCELONA,

Tel. [phone], Fax. [phone]

Sweden: Kottbygatan 7, Akalla. S-164 85 STOCKHOLM,

Tel. [phone], Fax. [phone]

Switzerland: Allmendstrasse 140, CH-8027 ZÜRICH,

Tel. [phone], Fax. [phone]

Taiwan: PHILIPS TAIWAN Ltd., 23-30F, 66, Chung Hsiao West

Road, Sec. 1. Taipeh, Taiwan ROC, P.O. Box 22978,
TAIPEI 100, Tel. [phone], Fax. [phone].

Thailand: PHILIPS ELECTRONICS (THAILAND) Ltd.,

209/2 Sanpavuth-Bangna Road Prakanong,
Bangkok 10260, THAILAND,
Tel. [phone], Fax. [phone].

Turkey:Talatpasa Cad. No. 5, 80640 GÜLTEPE/ISTANBUL,

Tel. [phone], Fax. [phone]

United Kingdom: Philips Semiconductors LTD.,

276 Bath Road, Hayes, MIDDLESEX UB3 5BX,
Tel. [phone], Fax. [phone]

United States:811 East Arques Avenue, SUNNYVALE,

CA 94088-3409, Tel. [phone], Fax. [phone]

Uruguay: Coronel Mora 433, MONTEVIDEO,

Tel. [phone], Fax. [phone]

Internet: http://www.semiconductors.philips.com/ps/
For all other countries apply to: Philips Semiconductors,

International Marketing and Sales, Building BE-p,
P.O. Box 218, 5600 MD, EINDHOVEN, The Netherlands,
Telex 35000 phtcnl, Fax. [phone]

SCD38 © Philips Electronics N.V. 1994

All rights are reserved. Reproduction in whole or in part is prohibited without the
prior written consent of the copyright owner.

The information presented in this document does not form part of any quotation
or contract, is believed to be accurate and reliable and may be changed without
notice. No liability will be accepted by the publisher for any consequence of its
use. Publication thereof does not convey nor imply any license under patent- or
other industrial or intellectual property rights.

Printed in The Netherlands

123065/1500/01/pp12 Date of release: 1995 Feb 09
Document order number: 9397 747 70011

Philips Semiconductors