Datasheet CLC231AK, CLC231AI, CLC231A8CC, CLC231A8AC Datasheet (NSC)

Features

■

165MHz closed-loop – -3dB bandwidth

■

15ns settling to 0.05%

■

1mV input offset voltage, 10µV/°C drift

■

100mA output current

■

Excellent AC and DC linearity

Applications

■

Driving flash A/D converters

■

Precision line driving
(a gain of 2 cancels matched-line losses)

■

DAC current-to-voltage conversion

■

Low-power, high-speed applications
(50mW @ ±5V)

General Description

Comlinear CLC231
Fast Settling, Wideband Buff-Amp™ (A

v = ±1 to ±5)

N

August 1996

Comlinear CLC231

Fast Settling, Wideband Buff-Amp™ (A

v

= ±1 to ±5)

Typical Performance

Package Dimensions

Bottom View

The CLC231 is constructed using thin film resistor/bipolar tran­sistor technology, and is available in the following versions:

CLC231AI -25°C to +85°C 12-pin TO-8 can
CLC231A8C -55°C to +125°C 12-pin TO-8 can,

MIL-STD-883, Level B

CLC231AK -55°C to +125°C 12-pin TO-8 can, features burn-in

and hermetic testing

CLC231AM -55°C to +125°C 12-pin TO-8 can, screened to

Comlinear’s M standard for high
reliability

DESC SMD number: 5962-89594

© 1996 National Semiconductor Corporation http://www.national.com

Printed in the U.S.A.

Not Intended For New Designs

CLC231 Electrical Characteristics

(Av= +2, Vcc= ±15V, RL= 100Ω, Rf= 250Ω; unless specified)

Absolute Maximum Ratings

http://www.national.com 2

Min/max ratings are based on product characterization and simulation. Individual parameters are tested as noted. Outgoing quality levels are
determined from tested parameters.

CLC231 Typical Performance Characteristics

(TA= 25°, Av= +2, VCC= ±15V, RL= 100W; unless specified)

3 http://www.national.com

http://www.national.com 4

This page intentionally left blank.

5 http://www.national.com

Comlinear CLC231

Fast Settling, Wideband Buff-Amp™ (A

v

= ±1 to ±5)

http://www.national.com 6 Lit #150231-006

Customer Design Applications Support

National Semiconductor is committed to design excellence. For sales, literature and technical support, call the
National Semiconductor Customer Response Group at 1-800-272-9959 or fax [phone].

Life Support Policy

National’s products are not authorized for use as critical components in life support devices or systems without the express written approval
of the president of National Semiconductor Corporation. As used herein:

1. Life support devices or systems are devices or systems which, a) are intended for surgical implant into the body, or b) support or
sustain life, and whose failure to perform, when properly used in accordance with instructions for use provided in the labeling, can
be reasonably expected to result in a significant injury to the user.

2. Acritical component is any component of a life support device or system whose failure to perform can be reasonably expected to
cause the failure of the life support device or system, or to affect its safety or effectiveness.

National Semiconductor National Semiconductor National Semiconductor National Semiconductor
Corporation Europe Hong Kong Ltd. Japan Ltd.

1111 West Bardin Road Fax: [phone]th Floor, Straight Block Tel: [phone]
Arlington, TX 76017 E-mail: europe.support.nsc.com Ocean Centre, 5 Canton Road Fax: [phone]
Tel: [phone] Deutsch Tel: [phone] Tsimshatsui, Kowloon
Fax: [phone] English Tel: [phone] Hong Kong

Francais Tel: [phone] Tel: [phone]
Italiano Tel: [phone] Fax: [phone]

National does not assume any responsibility for use of any circuitry described, no circuit patent licenses are implied and National reserves the right at any time without notice to change said
circuitry and specifications.

N