Datasheet CLC200AI, CLC200A8CC, CLC200A8AC Datasheet (NSC)

Features

■

-3dB bandwidth of 95MHz

■

0.1% settling in 18ns

■

4000V/µs slew rate

■

Low distortion, linear phase

■

3.6ns rise and fall times

Applications

■

Fast, precision Ato D, D to Aconversion

■

Baseband and video communications

■

Radar, sonar, IF processors

■

Laser drivers, photodiode preamps

■

High-density buffering

■

Graphic CRT composite video drive amp

General Description

Comlinear CLC200
Fast Settling, Wideband Operational Amplifiers

N

August 1996

Comlinear CLC200

Fast Settling, Wideband Operational Amplifiers

Typical Performance

Package Dimensions

Bottom View

The CLC200 is constructed using thin film resistor/bipolar transis­tor technology, and is available in the following versions:

CLC200AI -25°C to +85°C 12-pin TO-8 can
CLC200A8C -55°C to +125°C 12-pin TO-8 can,

MIL-STD-883, Level B

CLC200AK -55°C to +125°C 12-pin TO-8 can, features burn-in

and hermetic testing

CLC200AM -55°C to +125°C 12-pin TO-8 can, screened to

Comlinear’s M std. for high reliability

DESC SMD number: 5962-89910

© 1996 National Semiconductor Corporation http://www.national.com

Printed in the U.S.A.

Not Intended For New Designs

CLC200 Electrical Characteristics

(Av= +20,Vcc= +5V, RL= 200Ω, Rf= 2000Ω; unless specified)

Absolute Maximum Ratings

http://www.national.com 2

Min/max ratings are based on product characterization and simulation. Individual parameters are tested as noted. Outgoing quality levels are
determined from tested parameters.

CLC200 Typical Performance Characteristics

(TA= +25°, Av= +20, VCC= ±5V, RL= 200W; unless specified)

3 http://www.national.com

http://www.national.com 4

This page intentionally left blank.

5 http://www.national.com

Comlinear CLC200

Fast Settling, Wideband Operational Amplifiers

http://www.national.com 6 Lit #150200-005

Customer Design Applications Support

National Semiconductor is committed to design excellence. For sales, literature and technical support, call the
National Semiconductor Customer Response Group at 1-800-272-9959 or fax [phone].

Life Support Policy

National’s products are not authorized for use as critical components in life support devices or systems without the express written approval
of the president of National Semiconductor Corporation. As used herein:

1. Life support devices or systems are devices or systems which, a) are intended for surgical implant into the body, or b) support or
sustain life, and whose failure to perform, when properly used in accordance with instructions for use provided in the labeling, can
be reasonably expected to result in a significant injury to the user.

2. Acritical component is any component of a life support device or system whose failure to perform can be reasonably expected to
cause the failure of the life support device or system, or to affect its safety or effectiveness.

National Semiconductor National Semiconductor National Semiconductor National Semiconductor
Corporation Europe Hong Kong Ltd. Japan Ltd.

1111 West Bardin Road Fax: [phone]th Floor, Straight Block Tel: [phone]
Arlington, TX 76017 E-mail: europe.support.nsc.com Ocean Centre, 5 Canton Road Fax: [phone]
Tel: [phone] Deutsch Tel: [phone] Tsimshatsui, Kowloon
Fax: [phone] English Tel: [phone] Hong Kong

Francais Tel: [phone] Tel: [phone]
Italiano Tel: [phone] Fax: [phone]

National does not assume any responsibility for use of any circuitry described, no circuit patent licenses are implied and National reserves the right at any time without notice to change said
circuitry and specifications.

N