Datasheet CLC114AJE, CLC114AJ-MLS, CLC114AJP, CLC114AJE-TR13, 5962-9233901M2A Datasheet (NSC)

Features

■

Closed-loop, quad buffer

■

200MHz small-signal bandwidth

■

450V/µs slew rate

■

Low power, 30mW per channel (±5V sup.)

■

62dB channel isolation (10MHz)

■

Specified for crosspoint switch loads

Applications

■

Video crosspoint switch driver

■

Video distribution buffers

■

Video switching buffers

■

Video signaling multiplexing

■

Instrumentation amps

■

Active filters

General Description

CLC114
Quad, Low-P ower Video Buffer

N

June 1999

CLC114

Quad, Lo w-Po wer Video Buffer

Pinout

Typical Application

© 1999 National Semiconductor Corporation http://www.national.com

Printed in the U.S.A.

Constructed using an advancd, complementary bipolar process and
National’s proven high-speed architectures, the CLC114 is available
in several versions to meet a variety of requirements.

CLC114AJP -40°C to +85°C 14-pin plastic DIP
CLC114AJE -40°C to +85°C 14-pin plastic SOIC
CLC114ALC -40°C to +85°C dice
CLC114AMC -55°C to +125°C dice qualified to Method 5008,

MIL-STD-883, Level B

CLC114A8B -55°C to +125°C 14-pin CERDIP,

MIL-STD-883, Level B

DESC SMD number: 5962-92339

CLC114 Electrical Characteristics

(Vcc= +5V, RL= 100Ω unless specified)

Performance Driving a Crosspoint Swtich

Absolute Maximum Ratings Miscellaneous Ratings

http://www.national.com 2

Min/max ratings are based on product
characterization and simulation. Individual
parameters are tested as noted. Outgoing
quality levels are determined from tested
parameters.

Reliability Information

Transistor Count 64

Pac kage Thermal Resistance

Package

θθ

JC

θθ

JA

Plastic (AJP) 65°C/W 115°C/W
Surface Mount (AJE) 55°C/W 125°C/W
CERDIP 35°C/W 90°C/W

CLC114 Typical Performance Characteristics

3 http://www.national.com

http://www.national.com 4

This page intentionally left blank.

5 http://www.national.com

CLC114

Quad, Lo w-Po wer Video Buffer

http://www.national.com 6

Customer Design Applications Support

National Semiconductor is committed to design excellence. For sales, literature and technical support, call the
National Semiconductor Customer Response Group at 1-800-272-9959 or fax [phone].

Life Support Policy

National’s products are not authorized for use as critical components in life support devices or systems without the express written approval of
the president of National Semiconductor Corporation. As used herein:

1. Life support devices or systems are devices or systems which, a) are intended for surgical implant into the body, or b) support or
sustain life, and whose failure to perform, when properly used in accordance with instructions for use provided in the labeling, can
be reasonably expected to result in a significant injury to the user.

2. A critical component is any component of a life support device or system whose failure to perform can be reasonably expected to
cause the failure of the life support device or system, or to affect its safety or effectiveness.

National Semiconductor National Semiconductor National Semiconductor National Semiconductor
Corporation Europe Hong Kong Ltd. Japan Ltd.

1111 West Bardin Road Fax: [phone] 2501 Miramar Tower Tel: [phone]
Arlington, TX 76017 E-mail: europe.suppor t.nsc.com 1-23 Kimberley Road Fax:[phone]
Tel: [phone] Deutsch Tel:[phone] Tsimshatsui, Kowloon
Fax:[phone] English Tel:[phone] Hong Kong

Francais Tel: [phone] Tel: [phone]
Italiano Tel:[phone] Fax:[phone]

National does not assume any responsibility for use of any circuitry described, no circuit patent licenses are implied and National reserves the right at any time without notice to change said
circuitry and specifications.

N