Datasheet CLC103AM, CLC103AI Datasheet (NSC)

N

Comlinear CLC103
Fast Settling, High Current Wideband Op Amp

August 1996

Comlinear CLC103

Fast Settling, High Current Wideband Op Amp

General Description

Features

■

80MHz full-power bandwidth
(20Vpp, 100Ω)

■

200mA output current

■

0.4% settling in 10ns

■

600V/µs slew rate

■

4ns rise and fall times (20V)

Applications

■

Coaxial line driving

■

DAC current to voltage amplifier

■

Flash A to D

■

Baseband and video communications

■

Radar and IF processors

The CLC103 is constructed using thin film resistor/bipolar transistor
technology, and is available in two versions:

CLC103AI -25°C to +85°C 24-pin ceramic DIP
CLC103AM -55°C to +125°C 24-pin ceramic DIP,

MIL-STD-883, Level B

© 1996 National Semiconductor Corporation http://www.national.com

Printed in the U.S.A.

CLC103 Electrical Characteristics

(AV= +20, Vcc= +15V, RL= 100Ω unless specified)

Min/max ratings are based on product characterization and simulation. Individual parameters are tested as noted. Outgoing quality levels are
determined from tested parameters.

http://www.national.com 2

CLC103 Typical Performance Characteristics

( Av= +20, Vcc= ±15V, RL= 100W; unless specified)

3 http://www.national.com

http://www.national.com 4

This page intentionally left blank.

5 http://www.national.com

Comlinear CLC103

Fast Settling, Hi9h Current Wideband Op Amps

Customer Design Applications Support

National Semiconductor is committed to design excellence. For sales, literature and technical support, call the
National Semiconductor Customer Response Group at 1-800-272-9959 or fax [phone].

Life Support Policy

National’s products are not authorized for use as critical components in life support devices or systems without the express written approval
of the president of National Semiconductor Corporation. As used herein:

1. Life support devices or systems are devices or systems which, a) are intended for surgical implant into the body, or b) support or
sustain life, and whose failure to perform, when properly used in accordance with instructions for use provided in the labeling, can
be reasonably expected to result in a significant injury to the user.

2. Acritical component is any component of a life support device or system whose failure to perform can be reasonably expected to
cause the failure of the life support device or system, or to affect its safety or effectiveness.

National Semiconductor National Semiconductor National Semiconductor National Semiconductor
Corporation Europe Hong Kong Ltd. Japan Ltd.

1111 West Bardin Road Fax: [phone]th Floor, Straight Block Tel: [phone]

N

Arlington, TX 76017 E-mail: europe.support.nsc.com Ocean Centre, 5 Canton Road Fax: [phone]
Tel: [phone] Deutsch Tel: [phone] Tsimshatsui, Kowloon
Fax: [phone] English Tel: [phone] Hong Kong

Francais Tel: [phone] Tel: [phone]
Italiano Tel: [phone] Fax: [phone]

National does not assume any responsibility for use of any circuitry described, no circuit patent licenses are implied and National reserves the right at any time without notice to change said
circuitry and specifications.

http://www.national.com 6 Lit #150103-003